Tripp Lite | U439-002-CG2 | Owner's Manual | Tripp Lite U439-002-CG2 Owner's Manual

Tripp Lite U439-002-CG2 Owner's Manual
Owner’s Manual
USB 3.1 Gen 2 (10 Gbps) to
Dual SATA Dock/Cloning Station
Model: U439-002-CG2
Este manual esta disponible en español en la página de
Tripp Lite: www.tripplite.com/support
Ce manuel est disponible en français sur le site Web de
Tripp Lite : www.tripplite.com/support
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
18-09-282-933817-EN.indd 1
Copyright © 2018 Tripp Lite. All rights reserved.
1
9/26/2018 11:57:26 AM
Product Features
• Dual SATA docking station allows connection of two 2.5” or
3.5” SATA I, II or III hard drives from a computer’s USB-C or
Thunderbolt 3 port
• Quickly access a hard drive’s content without time-consuming
internal installation
• One-touch offline cloning duplicates one hard drive onto another
without needing to connect to a host computer
• Cloning status displays via LED progress bar
• Supports USB 3.1 Gen 2 data transfer rates up to 10 Gbps
• UASP (USB Attached SCSI Protocol)* provides up to 70% faster
performance when connected to a UASP-enabled host controller
• Backward compatible with SuperSpeed USB 3.0 and High Speed
USB 2.0 standards
• Accepts 2.5” and 3.5” hard drives up to 10 TB**
*Requires UASP-enabled host controller. UASP is supported by Windows 8
and later, Mac OS X 10.8 and later, and Linux.
**Will work with larger hard drives as they become available.
18-09-282-933817-EN.indd 2
2
9/26/2018 11:57:26 AM
Package Contents
• U439-002-CG2
• USB 3.1 Gen 2 (10 Gbps) Device Cable, USB-C (M/M) – 3 ft.
• External Power Supply (Input: 100-240V, 50/60 Hz, 1.5A;
Output: 12V 3A)
• Owner’s Manual
System Requirements
• (x2) 2.5” or 3.5” SATA Hard Drive
• Computer with an available USB port. A USB Type-C 3.1 Gen 2
port is required to achieve maximum data transfer speeds.
Note: The offline cloning function will not work if the U439-002-CG2
is connected to a computer. For more information, see Offline Cloning
Instructions.
18-09-282-933817-EN.indd 3
3
9/26/2018 11:57:26 AM
Docking Station Instructions
Notes:
• Hard drives are sensitive to static electricity and must be handled properly
to prevent data loss. Always handle your hard drive with caution. Wear
an anti-static strap (Tripp Lite model: P999-000) when transporting it, or
touch a grounded metal surface to discharge yourself of static electricity
prior to handling the drive.
• If your SATA hard drive has not been formatted, you will first need to
format it using your computer’s Disk Management utility.
1. Connect the included power supply to the unit and plug it into
a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS).
2. Insert your 2.5” or 3.5” SATA hard drive into an available bay on the
docking station. Make sure the drive is securely seated on the SATA
connector. Repeat this step to connect an additional hard drive.
3. Connect the included USB 3.1 Gen 2 cable between your
computer and the docking station.
4. Turn on power to the docking station using the ON/OFF button
on the back of the unit. The red “Power” LED will illuminate to
indicate power is being received. The red LEDs for drive bays A
and B will illuminate to indicate a hard drive is connected to the
corresponding port and recognized by the computer.
18-09-282-933817-EN.indd 4
4
9/26/2018 11:57:26 AM
Offline Cloning Instructions
Notes:
• Make sure there is no USB connection between the U439-002-CG2
and a computer. The offline cloning function will not work if the
U439-002-CG2 is connected to a computer.
• If your SATA hard drive has not been formatted, you will first need
to format it using your computer’s Disk Management utility before
proceeding with cloning.
• The Replica Drive’s (Bay B) capacity must be larger than that of the
Master Drive (Bay A). If its capacity is smaller or equal to the Master
Drive, you will not be able to clone information onto it.
• Prior to cloning, ensure there is no important data stored on the Replica
Drive. Once cloning begins, all data on the Replica Drive will be deleted
and replaced with the cloned data from the Master Drive.
• Be alert, the cloning process will take some time (approximately
2.5 hours per 1 TB). Do not turn off power or remove the hard drive
before the LED progress bars indicate the process is completed.
1. Connect the included power supply to the unit and plug it into
a Tripp Lite Surge Protector, Power Distribution Unit (PDU), or
Uninterruptible Power Supply (UPS).
2. Insert the 2.5” or 3.5” SATA Master hard drive (the drive that
you want to clone) into the Master Drive (Bay A) of the docking
station.
3. Insert the 2.5” or 3.5” SATA Replica hard drive (the drive that
the cloned data will be copied to) into the Replica Drive (Bay B)
of the docking station.
18-09-282-933817-EN.indd 5
5
9/26/2018 11:57:26 AM
Offline Cloning Instructions
4. Turn on power to the docking station using the ON/OFF button
on the back of the unit. The red “Power” LED will illuminate to
indicate that power is being received. The red LEDs for drive
bays A and B will illuminate to indicate a hard drive is connected
to the corresponding port and ready for cloning.
Note: Both the A and B LEDs will blink during the cloning process.
5. Press the Clone button for several seconds until the four cloning
LED lights illuminate blue at once.
6. The status LED of 25% will blink when the cloning begins. The
progress bar LEDs will illuminate blue to indicate the percentage
of cloning completed during the process.
7. Once the cloning reaches 100%, all blue progress bar LEDs will
blink blue. The cloning process is complete once the LEDs stop
blinking.
18-09-282-933817-EN.indd 6
6
9/26/2018 11:57:26 AM
Warranty and Product Registration
3-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of
three (3) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited
to repairing or replacing (at its sole option) any such defective products. To obtain service under
this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or
an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized
TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This warranty does
not apply to equipment which has been damaged by accident, negligence or misapplication or has
been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some
states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s)
or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any
costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software,
loss of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Notice, Class B
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
18-09-282-933817-EN.indd 7
7
9/26/2018 11:57:27 AM
Warranty and Product Registration
Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the
user’s authority to operate this equipment.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
18-09-282-933817-EN.indd 8
8
18-09-282 93-3817_RevB
9/26/2018 11:57:27 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising