Tripp Lite | WWSS1327RWTC | Owner's Manual | Tripp Lite WWSS1327RWTC Owner's Manual

Tripp Lite WWSS1327RWTC Owner's Manual
Owner’s Manual
Single Display Sit-Stand
Wall-Mount Workstation
Model: WWSS1327RWTC
75x75
100x100
27”
MAX
13.2 lb.
(6.6 kg)
MAX
Este manual esta disponible en español en la página de Tripp Lite: www.tripplite.com
Ce manuel est disponible en français sur le site Web de Tripp Lite : www.tripplite.com
Русскоязычная версия настоящего руководства представлена на веб-сайте компании Tripp Lite по адресу: www.tripplite.com
Dieses Handbuch ist in deutscher Sprache auf der Tripp Lite-Website verfügbar: www.tripplite.com
PROTECT YOUR INVESTMENT!
Register your product for quicker service and ultimate peace of mind.
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
1
Important Safety Instructions
NOTE: Read the entire instruction manual before you start installation and assembly.
WARNING
• Please read the entire instruction manual before you start installation and assembly. If you have questions about any of the
instructions or warnings, please contact Tripp Lite.
• This desk stand is designed to be installed and used only as specified in this manual. Improper installation of this product may cause
damage or serious injury.
• Be sure the supporting surface will safely support the combined weight of the equipment and all attached hardware and
components.
• Always use an assistant or mechanical lifting equipment to safely lift and position the equipment.
• Tighten screws firmly, but do not over-tighten. Over-tightening can cause damage to the items and reduce their holding power.
• This product is intended for indoor use only. Using this product outdoors could lead to product failure and personal injury.
Warranty & Product Registration
5-Year Limited Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 5 years from the date
of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product, in its sole discretion.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES
OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES
OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are
subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.
PRODUCT REGISTRATION
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
2
Component Checklist
IMPORTANT: Ensure all parts according to the component checklist have been received prior to installation. If any parts are
missing or faulty, visit www.tripplite.com/support for service.
A
Keyboard Tray
Holder
Keyboard Arm (A)
Display Arm
B
Keyboard Arm (B)
M4 x 12 (x4)
C
D
M6 x 25 (x3)
3 mm (x1)
F
H
Keyboard Tray
ΦO8 x 40 (x3)
M5 x 12 (x4)
M6 (x2)
Wall Rail
Keyboard Arm
Attachment
M6 x 15 (x2)
M5 x 18 (x1)
E
G
Thin Client
M5 x 10 (x4)
M5 (x4)
ΦO14 x 6.5 x 1 (x1)
(x3)
4 mm (x1)
M6 x 50 (x3)
M5 (x4)
(x1)
3
5 mm (x1)
(x8)
Assembly
1 Attach wall rail to wall.
For wood stud wall installation.
30 mm (1.2 in.)
F
3 mm (.12 in.)
Or For concrete wall installation.
50 mm (2.0 in.)
F
8 mm (.31 in.)
WARNING
• When mounting on a wood stud wall, make sure mounting screws are anchored into the center of the studs. Use of a stud
finder is highly recommended.
• When installing wall mounts onto a concrete masonry unit (also known as a CMU or “cinder block”), verify that the actual
concrete thickness is at least 35 mm (1-3/8”) in order to hold the concrete anchors. DO NOT DRILL INTO MORTAR JOINTS!
Be sure to mount the wall mount with the included concrete anchors and anchor bolts onto solid sections of the blocks.
The solid sections can generally be found 25 mm (1”) toward the middle of the block from either end. An electric drill on
a slow setting is suggested to drill the hole rather than a hammer drill so as to avoid breaking out the back of the hole
when entering a hollow section.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined load of the equipment and all attached
hardware and components.
4
Assembly
2 Assemble keyboard tray.
C
C
E
C
4 mm
3 Attach keyboard tray to keyboard arm.
B
C
E
Adjust to proper tension.
4 mm
4 mm
4 Attach keyboard tray and monitor arm to wall rail.
D
D
5 mm
NOTE: Turn clockwise to
reduce tension for lighter
monitors and counterclockwise to increase tension
for heavier monitors.
3 mm
E
5
Assembly
5 (Optional) Attach thin client to VESA plate.
G
B
G
H
H
6 Adjust tension of keyboard arm and monitor arm.
NOTE: Turn counter-clockwise to reduce
tension for lighter monitors and clockwise
to increase tension for heavier monitors.
Adjust to proper
tension.
5 mm
3 mm
Turn the knobs to horizontally
adjust the thin client.
Use the included a hex keys to adjust
the height tension of the mechanical
spring arm, to keep different weight of
monitors still at any position.
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY (13.2 lb. / 6 kg). SERIOUS INJURY OR PROPERTY
DAMAGE MAY OCCUR!
6
Notes
7
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please visit www.tripplite.com/support if you have any questions.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
8
17-12-059 93-376E_RevA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising