Tripp Lite | B110-SP-CAT | Quick Start Guide | Tripp Lite B110-SP-CAT Quick Start Guide

Tripp Lite B110-SP-CAT Quick Start Guide
Quick Start Guide
Digital Signage In-Line
HDBaseT & 10G Network
Surge Protector
Model: B110-SP-CAT
Este guía esta disponible en español en la página de Tripp Lite:
www.tripplite.com/support
Ce guide est disponible en français sur le site Web de Tripp Lite :
www.tripplite.com/support
Русскоязычная версия настоящего краткого руководства представлена
на веб-сайте компании Tripp Lite по адресу: www.tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
www.tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
1
Package Includes
•
•
•
•
•
•
B110-SP-CAT
Grounding Wire, 12 in. / 305 mm
Mounting Screws (x4)
Screw Anchors (x4)
Grounding Wire Screw
Quick Start Guide
Product Features
• Protects your network equipment’s inputs and outputs against electrostatic
discharge (ESD), lightning surges and cable discharge events
• Meets the following IEC regulations:
o IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact)
o IEC 61000-4-5 (Lightning) 2kA (8/20µs), 6kV (8/20µs)
• Lightning protection reaction speed < 1 ns
• Solid-state silicon-avalanche technology
• Supports network data transmission speeds up to 10 Gbps
• Supports resolutions up 4K @ 60 Hz (HDBaseT)
• Easy in-line installation with integrated mounting ears
• Passive by design – no external power required
2
Installation
Note: The following instructions assume that two network devices are currently
connected together.
Single Device Protection:
1. Disconnect the installed patch cable from the device you wish to protect
and attach this cable to the “Cable End” of the In-Line HDBaseT & 10G
Network Surge Protector.
2. Using a Cat5/5e/6 patch cable (not included), connect the device to be
protected to the “Equipment End” of the In-Line HDBaseT & 10G Network
Surge Protector.
Note: For best protection performance, the patch cable between the “Equipment
End” of the In-Line HDBaseT & 10G Network Surge Protector and the equipment
to be protected should not exceed 300 ft. (90 m). Tripp Lite’s N001-Series Cat5e
Snagless Patch Cables are recommended.
3. Connect the ground wire to the In-Line HDBaseT & 10G Network Surge
Protector and then to earth ground.
NVR
Network Device
(Protected)
Equipment End
In-Line HDBaseT
& 10G Network
Surge Protector
Cable End
Network Source
(Unprotected)
PC
3
Installation
Multiple Device Protection:
Note: The maximum distance between any two In-Line HDBaseT & 10G Network
Surge Protectors is 328 ft. (100 m).
1. Disconnect the installed patch cables from both of the devices you wish to
protect.
2. Connect an In-Line HDBaseT & 10G Network Surge Protector to each end
of the previously uninstalled patch cable, ensuring both ends of the patch
cable are connected to the “Cable End” of the In-Line HDBaseT & 10G
Network Surge Protector.
3. Using Cat5/5e/6 patch cables (not included), connect the “Equipment
End” of each In-Line HDBaseT & 10G Network Surge Protector to the
network devices you wish to protect.
Note: For best protection performance, the Cat5/5e/6 patch cable between the
“Equipment End” of the In-Line HDBaseT & 10G Network Surge Protector and the
network equipment to be protected should not exceed 300 ft. (90 m). Tripp Lite’s
N001-Series Cat5e Snagless Patch Cables are recommended.
4. Connect the ground wire to each In-Line HDBaseT & 10G Network Surge
Protector and then to earth ground.
HDBaseT TX and Source
(Protected)
PC
Equipment End
Cable End
Cable End
328 ft. / 100 m
4K @ 60 Hz
Equipment End
HDBaseT RX and Device
(Protected)
Monitor
4
Specifications
Input / Output Connectors
ESD Protection
Lightning Protection
Lightning Protection Reaction Speed
Operating Temp
Storage Temp
Bandwidth (Data Rate)
Return Loss (100Ω)
Max Resolution Supported
Dimensions
RJ45 (Female)
15kV (Air), 8kV (Contact)
2kA (8/20µs) / 6kV (8/20µs)
<1 ns
14 to 167°F / 10 to 75°C
-40 to 194°F / -40 to 90°C
Up to 10 Gbps
16 dB
4K @ 60 Hz
2.63 x 3.43 x 1.06 /
67 x 87 x 27 mm
0.28 lb. / 127 g
Weight
5
Warranty and Product Registration
2-Year Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship for a period
of two (2) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is
limited to repairing or replacing (at its sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material Authorization (RMA) number from
Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an
authorized Tripp Lite service center with transportation charges prepaid and must be accompanied
by a brief description of the problem encountered and proof of date and place of purchase. This
warranty does not apply to equipment, which has been damaged by accident, negligence or
misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS
PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not
liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment,
loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
Product Registration
Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Use of this equipment in life support applications where failure of this equipment can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its safety
or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without
notice. Photos and illustrations may differ slightly from actual products.
6
7
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
8
19-06-294 93-389E_RevC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising