Tripp Lite | N238-P01-MPTL-A | Quick Start Guide | Tripp Lite N238-P01-MPTL-A Quick Start Guide

Tripp Lite N238-P01-MPTL-A Quick Start Guide
Quick Start Guide
MPTL Cat6a STP Toolless
RJ45 Plug, PoE++ Compliant
Model: N238-P01-MPTL-A
Este manual esta disponible en español en la página de
Tripp Lite: tripplite.com/support
Ce manuel est disponible en français sur le site Web de
Tripp Lite : tripplite.com/support
Русскоязычная версия настоящего руководства
представлена на веб-сайте компании Tripp Lite по адресу:
tripplite.com/support
WARRANTY REGISTRATION
Register your product today and be
automatically entered to win an ISOBAR
surge protector in our monthly drawing!
tripplite.com/warranty
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
1
Package Includes
• N238-P01-MPTL-A MPTL Cat6a STP Toolless RJ45 Plug
• IDC Cap (x1)
• Dust Cap (x1)
• Quick Start Guide
Product Features
• Modular Plug Terminated Link (MPTL) technology allows the Cat6a cable
to be terminated on one end to an RJ45 plug that then connects directly
to a device, such as a Wireless Application Protocol (WAP) or surveillance
camera
• Simplifies installation of devices in an above-ceiling application where
installing a faceplate is not practical or where outlets, jacks and patch
cords must be plenum-rated
• 4PPoE compliant for Power over Ethernet (PoE++) installations up to
100W
• Accommodates 22 to 26 AWG solid or stranded cabling
2
Installation
1
2
1 in.
(25 mm)
Nut
3
Organize the braided / drain wire / foil to approximately
0.5 in. (10~12 mm)
1 in.
(25 mm)
1 in.
(25 mm)
0.25 in.
(6~8 mm)
1 in.
(25 mm)
0.25 in.
(6~8 mm)
or
or
0.5 in.
(10~12 mm)
Leave approximately
0.25 in. (6~8 mm)
excess foil for A/B wires
(orange / green pairs)
S / FTP
0.5 in.
(10~12 mm)
F / FTP
3
F / UTP
0.5 in.
(10~12 mm)
Installation
4
Follow the wire scheme map and
angle to route A/B wires through the
IDC cap
5
4
Installation
6
7
8
9
Use a pair of
wire cutters
to make the
front row
wires flush
5
Use a pair of wire
cutters to make the
front row wires flush
Installation
10
1
11
2
3
6
Installation
12
Specifications
Insertion Life
Re-Termination Life
Cable Gauge Compatibility
Cable Jacket Diameter
Electrical Current
Voltage Proof
(Contact to Contact)
Voltage Proof
(Contact to Shield)
Operating Temperature Range
Storage Temperature Range
Relative Humidity
750 Mating Cycles
Up to 20x
22 to 26 AWG (Solid or Stranded)
0.25 in. to 0.3 in. (6.5 mm to 8.5 mm)
1.5A
1000V DC
1500V DC
14°F to 140°F (-10°C to 60°C)
-40°F to 154°F (-40°C to 68°C)
10% to 90% RH (Non-Condensing)
7
Warranty and Product Registration
Limited Lifetime Warranty
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects
in material and workmanship for its lifetime. If the product should prove defective in material or workmanship
within that period, Seller will repair or replace the product, at its sole discretion. Service under this Warranty can
only be obtained by Buyer delivering or shipping the product (with all shipping or delivery charges prepaid) to:
Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609. Seller will pay return shipping charges.
Visit tripplite.com/support before sending any equipment back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT,
MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY
EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED
WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION
TO THE WARRANTY PERIOD SET FORTH ABOVE; THIS WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND
CONSEQUENTIAL DAMAGES.
(Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow
the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may
not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from
jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable,
adequate or safe for the use intended. Since individual applications are subject to great variation, the
manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any
specific application.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations,
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis
(this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste
Use of this equipment in life support applications where failure of this equipment can reasonably be expected
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not
recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos
and illustrations may differ slightly from actual products.
1111 W. 35th Street,
Chicago, IL 60609 USA
tripplite.com/support
8
19-09-344 93-39E1_RevB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising