Tripp Lite | SNMPWEBCARD | Quick Start Guide | Tripp Lite SNMPWEBCARD Quick Start Guide

Tripp Lite SNMPWEBCARD Quick Start Guide
Y
NT ION for a Lite nty
A
R AT day ripp arra
AR STR e to EE T m/w
W I lin FR .co
G on a ite
RE er in pl
st w ip
gi to .tr
Re ce ww
n
a !w
ch uct
d
o
pr
Installation Manual
SNMP/Web Management Accessory Card
Model: SNMPWEBCARD
Read this manual carefully before installation. A separate User's Guide
(PDF format) is included on the CD-ROM bundled with the accessory card.
Refer to the User's Guide for additional information about configuration
and operation.
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
200907010 93-2942-EN.indd 1
10/9/2009 2:58:56 PM
Installation
Warning: When handling the SNMPWEBCARD, follow standard ESD
(electrostatic discharge) precautions to avoid damaging the card. For your
safety, you should also read the documentation that came with your UPS system
or PDU to familiarize yourself with precautions against electric shock.
The SNMPWEBCARD allows users to operate any compatible Tripp Lite UPS
System or network-enabled PDU as a managed device on the network, accessible
via Web browser, Network Management Station or telnet. This manual refers to
installing the card in a UPS system, but the same instructions apply to installing
the card in a compatible PDU.
1 - Preparation
1-1
1-2
1-3
1-4
Confirm Package Contents: In addition to this manual, your package
should include the accessory card in an anti-static bag, a configuration cable
(73-1025), several faceplates and a CD-ROM containing additional
documentation and Management Information Base (MIB) files for use with
Network Management Systems (not otherwise required). If anything is
missing, contact your supplier immediately.
Install UPS: Install your UPS system and turn it on before installing the
SNMPWEBCARD. Ensure that the accessory card slot is accessible.
Locate MAC Address: The 12-digit MAC address (000667xxxxxx) is
printed in two locations: a label attached to the underside of the card and a
duplicate label inside the box. Attach the duplicate label to the UPS system
or keep it in a secure location for easy reference.
Determine Installation Method: If your network's DHCP server will
assign a dynamic IP address to the SNMPWEBCARD automatically,
proceed to 2 - Dynamic IP Address Assignment. If you will assign a static
IP address to the SNMPWEBCARD manually, proceed to 3 - Static IP
Address Assignment. If you are uncertain which method to use, contact
your network administrator for assistance before continuing the installation
process.
2
200907010 93-2942-EN.indd 2
10/9/2009 2:58:56 PM
Installation
2 - Dynamic IP Address Assignment
2-1
2-2
2-3
Insert SNMPWEBCARD in Accessory Slot: Use a screwdriver to remove
the accessory slot cover from the UPS. While the UPS is turned on, align
the SNMPWEBCARD with the guides in the accessory slot and push the
card into the slot until the ports are nearly even with the rear surface of the
UPS.
Connect SNMPWEBCARD to Network: Connect a standard Ethernet
patch cable to the RJ-45 Ethernet port on the card. Note: This port does not
support PoE (Power over Ethernet) applications. The card will attempt to
obtain an IP address via DHCP. This may take as long as several minutes,
depending on your network environment.
Discover IP Address: Contact your network administrator to determine
which IP address has been assigned to the card by the DHCP server. The
card can be identified on the DHCP server by referring to its MAC address
(see Step 1-3 ). You may wish to request a long-term lease period for the IP
address, depending on your application. After you have discovered the IP
address, proceed to 4 -Test and Configure. Note: The DHCP addresss is
also displayed during boot-up when connected to a computer through the
configuration cable and a terminal emulation program.
3 - Static IP Address Assignment/Terminal Menu
Configuration Settings
3-1
Determine IP Information: Before assigning a static IP address, you'll
need to know the IP address, gateway address and subnet mask. If you do
not have this information, contact your network administrator for assistance.
3
200907010 93-2942-EN.indd 3
10/9/2009 2:58:56 PM
Installation
3-2
Configure Terminal Emulation Program: Open a VT100-compatible
terminal emulation program (such as the HyperTerminal program bundled
with Microsoft® Windows®) on a computer with an available DB9 serial
port. (A notebook computer may be the most convenient choice.) Set the
terminal emulation program to use the COM
Bits per second:
9600
port A that corresponds to the DB9 serial port. Data bits:
8
Specify the parameters B required to
Parity:
None
Stop bits:
1
communicate with the SNMPWEBCARD
Flow control:
None
terminal interface:
If the terminal emulation program supports multiple emulation modes, you
may also need to specify VT100 emulation C .
Note: The following message will appear in the terminal startup menu:
IAM:Got AUTO-CONFIGURED IPv6 address FE80::4200:FF:FE01:8 on interface
eth0:3
IPv6 is not currently supported. Tripp Lite is working on IPv6 for a future
release.
A
B
C
4
200907010 93-2942-EN.indd 4
10/9/2009 2:58:57 PM
Installation
3-3
Insert SNMPWEBCARD in Accessory Slot: Use a screwdriver to remove
the accessory slot cover from the UPS. While the UPS is turned on, align the
SNMPWEBCARD with the guides in the accessory slot and push the card
into the slot until the ports are nearly even with the rear surface of the UPS.
3-4
Connect SNMPWEBCARD to Computer: Use the mini-DIN to DB9
serial cable (part number 73-1025) included with the card to connect the
card to the computer. The circular connector A at one end of the cable
attaches to the 8-pin mini-DIN serial port B on the card. (Align the
connector carefully to avoid damaging the pins.) The DB9 connector C at
the other end of the cable connects to the computer's serial port D .
A
D
C
B
3-5
3-6
Connect SNMPWEBCARD to Network: Connect a standard Ethernet
patch cable to the RJ-45 Ethernet port on the card. Note: This port does not
support PoE (Power over Ethernet) applications.
Configure SNMPWEBCARD in Terminal Mode: After a brief pause, an
initialization page should appear in the terminal emulation program. Press
any key on the keyboard within 5 seconds to change the card's settings. (If
the 5-second period has elapsed, you can reboot the card by removing it and
then re-seating it in the accessory slot.)
5
200907010 93-2942-EN.indd 5
10/9/2009 2:58:58 PM
Installation
Follow the sequence of responses below in order to assign an IP address to
the card. The default terminal mode password is TrippLite. Sample IP
settings are shown - supply your own IP information when you configure
your card.
This card’s hostname [ ]?
This card’s domain [ ]?
Obtain IP settings automatically using DHCP for Ethernet interface? [Y]
IP address? [10.2.0.98]
Subnet mask? [255.0.0.0]
Gateway address? [10.0.0.1]
DNS server 1? [10.0.0.5]
DNS server 2? [10.2.0.10]
This cards host name? [cornflakes]
This cards domain? [tlsoftwaredev.local]
SNMP Settings
Enable SNMP Community 0 [Y]? y
Choose a community privilege level:
0 - noAccess
1 - v1UserReadOnly
2 - v1UserReadWrite
3 - v2cUserReadOnly
4 - v2cUserReadWrite
Privilege Level [4]:
Community Name [tripplite]:
Allowable Address Range : [0.0.0.0]?
Allowable Address Mask : [0.0.0.0]?
Enable SNMP Community 1 [N]? n
Enable SNMP Community 2 [N]? n
Enable SNMP Community 3 [N]? n
Note: Default SNMP access is:
Community 0 enable with v2 read only community public
Community 1 enable with v2 read/write community tripplite
6
200907010 93-2942-EN.indd 6
10/9/2009 2:58:58 PM
Installation
Additional Settings
Additional Ethernet Settings:
Enable SNTP? [N]
Enable http? [Y]
Port number? [80]
Enable https? [N]
Port number? [443]
Enable telnet? [Y]
Port number? [23]
Enable ssh? [Y]
Port number? [22]
Hardware Parameters:
Would you like to update the RTC date/time in GMT? [N]
Time Zone (0 is GMT-12, 6 is CST) :
Time Zone Offsets Supported
Western Hemisphere
Eastern Hemisphere
Hour
Off-Set
0
1
2
3
4
5
6
7
8
9
10
11
+/-12
Hour
Off-Set
-1
-2
-3
-4
-5
-6
-7
-8
-9
-10
-11
Location
Greenwich, England
SE Greenland
Atlantic Ocean
Greenland Time
Atlantic Time
Eastern Standard Time
Central Standard Time
Mountain Standard Time
Pacific Standard Time
Alaska Time
Hawaii
Pacific Ocean
International Date Line
Location
Mid Europe/Africa
E Europe, E Central Africa
Moscow, Mid-East, E Africa
NW Caspian Sea
Ural Mountains, Russia
Almaty (Alma ATA), Russia
W Mongolia
China
Japan
Eastern Russia, Sydney, Australia
Kamchatskiy, E Russia
Do you wish to configure the advanced settings [y/n]? [Y]
This interface must have a unique MAC address.
Ethernet MAC Address? [00:06:67:01:00:08]
DO NOT MODIFY UNLESS DIRECTED BY YOUR
ADMINISTRATOR
Do you want to completely erase the file system? [N]
7
200907010 93-2942-EN.indd 7
10/9/2009 2:58:58 PM
Installation
DO NOT MODIFY UNLESS DIRECTED BY TRIPP LITE
TECHNICAL SUPPORT
Default Ethernet setting (0=Auto, 1=10 Half, 2=10 Full, 3=100 Half,
4=100 Full)? [Auto]
DO NOT MODIFY UNLESS DIRECTED BY YOUR
ADMINISTRATOR
3-7
You can also change the root password, real-time clock and other settings.
(Tripp Lite recommends against changing the default settings unless you are
an advanced user with a specific purpose.) After you have finished entering
settings, the card will save changes to memory and reboot (this may take
several minutes). After the card reboots, the initialization page should
display the new static IP settings.
Remove Serial Cable: Using one hand to hold the card in place, remove the
serial cable. Proceed to 4 -Test and Configure.
4 - Test and Configure
4-1
4-2
Test Network Connection: After an IP address has been assigned to the
card, try to access it with a Web browser that supports frames, forms and
Java™. Open a Web browser on a computer connected to the LAN and enter
the card's IP address. You should be prompted for a password. The user
name is admin and the default password is admin. After you enter the user
name and password, the PowerAlert Status page will appear in the browser
window. For more information about configuration and operation of the
managed device, refer to the SNMPWEBCARD User's Guide, included on
the CD-ROM bundled with the card.
Default UPS Shutdown Setting: During a loss of utility power, the
SNMPWEBCARD is configured to shut down the UPS system 2 minutes
after a low battery signal is received from the UPS. This allows the UPS to
provide the maximum available runtime to connected equipment. If you
want to change the default setting, follow these instructions:
8
200907010 93-2942-EN.indd 8
10/9/2009 2:58:58 PM
Installation
1. From the initial PowerAlert Status page, click the Settings button A at the
top of the screen, then click the Events button B that appears at the left
side of the screen.
2. From the Event Settings page, confirm that the Low Battery C and
Shutdown D box is checked and then click the Details Tab E , or doubleclick the checked box to access the Setting Details page.
3. From the Details page F , choose your preferred settings from the
Settings drop down menu G and click the Save Changes button H .
B
E
A
C
D
G
H
F
Attach Faceplate: Using one hand to hold the card in place, temporarily
detach the network cable. Align and attach the faceplate that matches your
UPS system, using screws from the accessory slot cover. Reattach the
network cable.
Note for Network Management System Users Only: Two MIB files Tripplite.mib and RFC1628.mib - must be loaded on each Network
Management Station that will monitor the UPS system via SNMP. The files
are provided on the CD-ROM included in the product package.
4-3
9
200907010 93-2942-EN.indd 9
10/9/2009 2:58:58 PM
Features
A
B
C
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity monitoring
and a dry contact interface to control and monitor alarm, security and
telecom devices. Contact Tripp Lite Customer Support at (773) 869-1234
for ordering information. Note: Do not connect a keyboard or mouse to this
port.
Mini-DIN Serial Port: Use this port to provide a direct terminal connection
to a computer with a terminal emulation program. A serial cable (part
number
73-1025) is included with the SNMPWEBCARD. If you need to order a
replacement cable, contact Tripp Lite Customer Support at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the SNMPWEBCARD to
the network with a standard Ethernet patch cable. The Link LED C1 and
Status LED C2 indicate several operating conditions, as shown in the table
below. Does not support PoE (Power Over Ethernet) applications.
A
C
B
C1
C2
SNMPWEBCARD Operating Conditions
Link LED Color
Off
Flashing Amber
Flashing Green
C2 Status LED Color
Off
Steady Green
Flashing Amber
C1
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
10
200907010 93-2942-EN.indd 10
10/9/2009 2:58:59 PM
Technical Support
Technical Support can be found at: www.tripplite.com/support
E-mail: techsupport@tripplite.com
Warranty and Warranty Registration
LIMITED WARRANTY
Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and
workmanship for a period of 2 years (except internal UPS system batteries outside USA and Canada, 1 year) from the date of initial
purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the product,
in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or
delivery charges prepaid) to: Tripp Lite, 1111 W. 35th Street, Chicago, IL 60609, USA. Seller will pay return shipping charges. Visit
www.tripplite.com/support before sending any equipment back for repair.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR
NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE WARRANTY EXPRESSLY SET FORTH HEREIN.
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF
MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS
WARRANTY EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations
on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights
which vary from jurisdiction to jurisdiction).
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use
intended. Since individual applications are subject to great variation, the manufacturer makes no representation or warranty as to the
suitability or fitness of these devices for any specific application.
Not compatible with PoE (Power over Ethernet) applications.
WARRANTY REGISTRATION
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a
drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
FCC Notice
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not
expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Regulatory Compliance Identification Numbers
For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique series
number. The series number can be found on the product nameplate label, along with all required approval markings and information.
When requesting compliance information for this product, always refer to the series number. The series number should not be confused
with the marking name or model number of the product.
Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.
11
200907010 93-2942-EN.indd 11
10/9/2009 2:58:59 PM
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
12
200907010 93-2942-EN.indd 12
200907010 • 932942-EN
10/9/2009 2:58:59 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising