CyberPower CSP600WSURC5 User Manual
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower CSP600WSURC5
Surge Protector. This manual explains the features and
operation of the CSP600WSURC5. Please take a few
moments to read this manual.
FEATURES
6-Outlet Surge Protector
(6 AC & 2 USB Ports)
CSP600WSURC5
1
2
1
2
1. USB Charging Ports*
Connect and charge up to 2 USB devices using the
surge protected USB charging ports. One is type-C port
and the other is Type-A port.
*USB outlets cannot be used as a USB hub. This device
does not transfer data.
2. Pivoting Outlets
Pivoting outlets for ease of use and convenience.
3. Six Standard Outlets
4. Surge Protected Indicator
Illuminated when the surge protection feature is
working properly.
5. Ground Indicator LED
Illuminated when a properly grounded AC outlet
is detected.
6. Safe-fail Protection
Power is cut to connected equipment when the unit
can no longer provide surge protection.
SPECIFICATIONS
3
3
4
5
• Model Number: CSP600WSURC5
• Outlets: 6 standard outlets
• USB Charging Rating: 5 V/3.6 A total
• Surge Protection: 900 Joules
• Electrical Rating: 125 V/15 A/1875 W
• UL Clamping Voltage: UL 1449 4th/500 V (L-N, L-G, N-G)
• Maximum Peak Current: 45,000 A
• 3 AC Lines Protected: L-N: 15,000 A, L-G: 15,000 A,
N-G: 15,000 A
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32 dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in
dry locations and only indoors. DO NOT plug into another
relocatable power tap. DO NOT “daisy chain” surge
protectors. DO NOT use with any aquarium equipment.
DO NOT use if properly grounded outlets are not
available. DO NOT install this device if there is less than 10
meters (30 feet) or more of wire between the electrical
outlet and electrical service panel. DO NOT use for
medical or life support equipment. This device features an
internal protection that will disconnect the surge protective
component at the end of its useful life, but it will maintain
unprotected power to the load.
TROUBLESHOOTING
▪ If the grounded indicator does not light when you plug in
the surge protector, move the surge protector to a different
grounded three-prong AC outlet. If it still does not light,
return the product to the retailer for assistance. If the surge
protector appears to be working properly, your outlets may
not be a properly grounded and need to be repaired by a
professional electrician. If the grounded indicator turns off
after a period of use, the surge protection has been
depleted. Replace your surge protector.
▪ If the protected indicator does not light, the surge
protector’s AC lines are no longer protected from surge.
The surge protector may have received a power surge or
spike beyond its specified limits that overloaded the
protection circuitry and rendered it inactive. The surge
protector has protected your connected equipment as
designed, but it will not protect against future surges, and
spikes. It should be replaced.
TECHNICAL SUPPORT
Please contact our Tech Support Department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation:
Monday – Friday 7:00am – 6:00pm CST
USER MANUAL
1
Copyright © 2018 Cyber Power Systems (USA), Inc. All rights reserved.
2
LIMITED LIFETIME WARRANTY AND CONNECTED
EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before using
the CyberPower CSP600WSURC5 (the “product”). By using the
product, you consent to be bound by the terms and conditions of
this limited lifetime warranty and connected equipment
guarantee (together referred to as this “warranty”). IF YOU DO
NOT AGREE TO THE TERMS AND CONDITIONS OF THIS
WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A FULL
REFUND PRIOR TO USING IT.
Who is providing this warranty, and what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides this
limited lifetime warranty. It only covers the original purchaser and
ends if you no longer own the product. This warranty covers
defects in materials and workmanship in the product under
normal use and conditions. It also covers equipment connected to
the product damaged because of the failure of the product. This
warranty covers the product and connected equipment for as
long as you own the product.
How do you open a connected equipment claim?
1. Call us at (877) 297-6937, or write to us at Cyber Power
Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN
55379, or send us an email at claims@cpsww.com within 10
days of the occurrence for instructions.
2. When you contact CyberPower, identify the product, the
purchase date, and the item(s) of connected equipment. Have
information on all applicable insurance or other resources of
recovery/payment that are available to the initial customer, and
request a claim number.
3. You must provide a dated purchase receipt (or other proof of
the original purchase) for the CyberPower unit and connected
equipment. You also need to provide a description of the
damage to your connected equipment.
4. Pack and ship the product to CyberPower and the item(s) of
connected equipment, a repair cost estimate for the damage to
the connected equipment, and all claim forms that CyberPower
provides to you. Show the claim number on the shipping label,
or include it with the product. You must prepay all shipping
costs. You are responsible for packaging and shipment, and
you must pay the cost of the repair estimate.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the product. If the product
is defective in material or workmanship, CyberPower will replace
it at CyberPower’s expense, or CyberPower will refund the full
purchase price you paid for the product (purchase receipt
showing price paid is required). If the product failed to protect
any equipment plugged into it, we will also send you forms for
making your claim for the connected equipment. We will replace
the equipment that was damaged because of the failure of the
product or pay you the fair market value (NOT REPLACEMENT
COST) of the equipment at of the time of the damage. We will
use Orion Blue Book, another third-party valuation guide, eBay,
Craigslist, or other source to establish that amount. Our maximum
liability is limited to $75,000 for the CSP600WSURC5.
3
Who pays for shipping?
We pay shipping when we send items to you; you pay when you
send items to us.
What are some things this warranty does not cover?
1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT
WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED
DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA
THAT IS LOST AS A RESULT OF THE FAILURE. THIS
WARRANTY DOES NOT COVER THE RESTORATION OF DATA
OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
2. This warranty does not cover: misuse, modification, operation
or storage outside of the environmental limits of the product
or the equipment connected to it. It does not cover damage
while in transit or in storage; if there has been improper
operation or maintenance, or use with items not designed or
intended for use with the product, such as laser printers,
appliances, aquariums, medical, or life support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the initial customer are
those provided by this warranty.
1. This warranty does not apply unless the product and the
connected equipment were connected to properly wired and
grounded outlets (including compliance with electrical and
safety codes of the most current electrical code), without the
use of any adapters or other connectors.
2. The product must have been plugged directly into the power
source. The equipment connected to the product must be
directly connected in the product, not “daisy chained”
together in serial fashion with any extension cords, another
product, or device similar to the product, surge suppressor,
or power tap. Any such installation voids the warranty.
3. The product and connected equipment must have been used
properly in a suitable environment, in conformance with any
applicable license, instruction manual, or warnings.
4. The product must have been used at all times within the
limitations on the product’s maximum rated wattage.
Where can I get more information?
Contact us at:
Cyber Power Systems (USA), Inc.
4241 12th Avenue East Suite 400
Shakopee, MN 55379;
Call us at (877) 297-6937;
Send us an email at claims@cpsww.com.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the limited
warranty, and also allows the opportunity of notifications for
product enhancements, upgrades, and other announcements.
Registration is quick and easy. Go to the Product Registration
Page at CyberPowerSystems.com/registration.
CONTACT INFORMATION
Cyber Power Systems (USA), Inc.
4241 12th Avenue East Suite 400
Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPowerSystems.com
CONFORMANCE APPROVALS
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference. (2) This device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit, not expressly
approved by the party responsible for compliance, could void the
user’s authority to operate the equipment.
CAN ICES-3(B)/NMB-3(B)
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and radiates radio frequency
energy. If not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, the
user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Please join CyberPower in caring for the environment by recycling
this manual.
This device is manufactured using environmentally-safe procedures in
compliance with the Restriction of Hazardous Substances (RoHS) directive.
UL Listed to U.S. and Canadian Safety Standards UL 1449. This product
is listed to applicable U.S. and Canadian safety standards by
Underwriters Laboratories Inc.
Full compliance with RoHS.
WARNING: This product can expose you to chemicals including styrene (ABS),
which is known to the State of California to cause cancer.
For more information, go to www.p65warnings.ca.gov.
4
© 2018 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
CyberPowerSystems.com
K01-0000720-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising