CyberPower | RB1290X10 | User manual | CyberPower RB1290X10 User Manual

CyberPower RB1290X10 User Manual
Smart App Online RT 1-3KVA Series
MODEL: OL1000RTXL2U, OL1500RTXL2U, OL2200RTXL2U,
OL3000RTXL2U, OL3000RTXL2UHV, OL1000ERTXL2U,
OL1500ERTXL2U, OL2000ERTXL2U, OL3000ERTXL2U,
OL1000RT JP, OL1500RT JP, OL2200RT JP, OL3000RT JP
Battery Replacement
Instructions
1
2
3
4
5
All CyberPower Systems replacement battery cartridges listed in
this manual use Non-Spillable Sealed Lead Acid Batteries.
CyberPower Systems encourages environmentally sound methods
for disposal and recycling of its battery cartridges. Please dispose
of and/or recycle your batteries in accordance to the local
regulations of your state.
K01-0000459-02
Smart App Online Tower 1-3KVA Series
MODEL: OL1000XL, OL1500XL, OL2200XL, OL3000XL, OL1000EXL,
OL1500EXL, OL2000EXL, OL3000EXL, OL1000XL JP,
OL1500XL JP, OL2200XL JP, OL3000XL JP
1
2
4
1. Remove the front faceplates.
2. Remove the screws securing the battery retention panel.
3. Pull the battery pack out together with the retention panel slowly
and then put the new battery pack back into the UPS.
4. Reconnect the battery pack connectors to the UPS. Then tighten the
screws of the battery retention panel.
5. Reinstall the front faceplates.
Smart App Online EBM for RT 1-1.5KVA Series
MODEL: BP36V60ART2U, BPE36V60ART2U, BPE36V60ART2US
1
2
3
4
3
5
5
1. Remove the front faceplates.
1. Remove the front faceplates.
2. Remove the screws securing the battery retention panel.
2. Remove the screws securing the battery retention panels.
3. Pull the battery pack out together with the retention panel slowly
and then put the new battery pack back into the UPS.
3. Pull the battery packs out together with the retention panels slowly
and then put the new battery packs back into the EBM.
4. Reconnect the battery pack connectors to the UPS. Then tighten the
screws of the battery retention panel.
5. Reinstall the front faceplates.
4. Reconnect the battery pack connectors to the EBM enclosure. Then
tighten the screws of the battery retention panel.
5. Reinstall the front faceplates.
Smart App Online EBM for RT 2-3KVA Series
MODEL: BP72V60ART2U, BPE72V60ART2U, BPE72V60ART2US
1
2
3
Smart App Online RT 6-10KVA Series
MODEL: BP240V30ART3U, BP240V50ART3U, BPE240V30ART3U,
BPE240V50ART3U,BPE240V30ART3US,
BPE240V50ART3US
1
2
3
4
4
5
1. Remove the front faceplates.
5
2. Remove the screws securing the battery retention panels. Unscrew the
battery connector retention hardware. Disconnect the battery power
cables and then remove the panel itself.
3. Pull the battery packs out slowly and then put the new battery
packs back into the compartment.
4. Reconnect the battery pack to the EBM enclosure and screw on the
battery connector retention hardware. Tighten the screws of the battery
retaining cover.
WARNING - It is very important to reconnect battery connections with the correct
polarity. Connectors are color coded red and black for positive and negative
polarity respectively. Permanent damage may be caused to the equipment if
polarity is reversed.
5. Reinstall the front faceplates.
Smart App Online Tower 6-10KVA Series
1. Remove the front faceplates.
2. Remove the screws securing the battery retention panel.
3. Raise the battery retention panel above the battery compartment
opening to allow the battery trays to be pulled out. Then put the new
battery trays into the compartment.
4. Align and reconnect the battery connectors and tighten the screws of the
battery retention panel.
5. Reinstall the front faceplates.
Replacement Battery Pack Table
Model Name
Battery QTY
MODEL: OL6000, OL8000, OL10000, OL6000E, OL8000E, OL10000E
1
2
3
RB1290X3L
RBP0074
RB1290X3R
RBP0079
RB1290X3A
RBP0075
4
5
6
1. Remove the front faceplates.
3
3
3
RB1290X6A
RBP0076
6
RB1290X6B
RBP0077
6
RB1290X6C
RBP0078
6
RB1290X10
RBP0072
10
RB1270X10
RBP0073
10
2. Remove the screws securing the battery retention panel.
3. Raise the battery retention panel above the battery compartment
opening to allow the battery trays to be pulled out.
4. Pull the battery trays out slowly and then put the new battery trays back
into the compartment.
5. Reconnect the battery connectors and tighten the screws of battery
retention panel.
6. Reinstall the front faceplates.
CyberPower Systems, Inc.
www.cyberpower.com
UPS or EBM Model
OL1000RTXL2U
OL1500RTXL2U
BP36V60ART2U (LEFT)
OL1000ERTXL2U
OL1500ERTXL2U
BPE36V60ART2US (LEFT)
BP36V60ART2U (RIGHT)
BPE36V60ART2US (RIGHT)
OL1500XL
OL1500EXL
OL2200RTXL2U
OL3000RTXL2U
OL3000RTXL2UHV
OL2200ERTXL2U
OL3000ERTXL2U
BP72V60ART2U
BPE72V60ART2U
OL2200XL
OL3000XL
OL2200EXL
OL3000EXL
BP240V50A
BP240V50ART3U
OL8000
OL10000
BPE240V50A
BPE240V50ART3U
OL8000E
OL10000E
BPE240V50AS
BPE240V50ART3US
BP240V30A
BP240V30ART3U
OL6000
BPE240V30A
BPE240V30ART3U
OL6000E
BPE240V30AS
BPE240V30ART3US
For USA and Canada:
4241 12th Ave East, Suite 400
Shakopee, MN 55379
Toll-free: (877) 297-6937
For all other regions:
Please visit our website for local contact information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising