CyberPower | R22U24CTR | User manual | CyberPower R22U24CTR User Manual

CyberPower R22U24CTR User Manual
PACKAGE CONTENTS
•
•
•
•
USB Charger Wall Outlet
8. Secure the charger outlet to
the wall box with the two
long screws (provided).
1, 2.4A USB Charger Wall Outlet
1, white decora-style wall plate
Screws: 2 long and 2 short
User’s Manual
FEATURES
R22U24CTR
Hot
(Black)
AC outlet
Neutral
(White)
9. Secure the wall plate to the
charger outlet with the two
short screws (provided).
USB Ports
AC outlet
Ground
(Green)
Front
•
•
•
•
•
•
•
Rear
Replaces a standard duplex outlet
Quickly charges USB devices
Tamper-resistant outlets for added safety
Provides two USB ports with 2.4A total output
Provides two standard 125V power outlets
Works in nearly all installations
Compatible with your existing decora wall plate
INSTALLING THE CHARGER
USER’S MANUAL
We recommend that the installation of the USB charger wall
outlet is performed by a professional electrician. For information
about electrical specifications, see SPECIFICATIONS.
Warnings
• RISK OF ELECTRIC SHOCK — Use only in dry locations and
only indoors.
• All cables should be routed away from the charger outlet
openings.
• DO NOT use with any aquarium equipment.
• DO NOT install in an outlet that is not grounded.
Notes to the installer
• This device must be installed in accordance with National and
Local electrical codes.
• To prevent severe shock or electrocution, always turn power
OFF at the service panel before working with wiring.
• This device should be used with copper or copper-clad wire.
DO NOT use with aluminum wire.
• DO NOT plug this device into a shallow wall box. The wall box
must be deep enough to house the charger outlet. If the box
is too shallow, the charger outlet will not fit securely into the
wall.
Copyright © 2017 Cyber Power Systems, Inc. All rights reserved.
1. Warning: DISCONNECT POWER. Failure to do so can
result in severe injury or death.
Make sure that you disconnect power to the circuit by
removing the fuse from the circuit breaker or turning
OFF the circuit breaker.
2. Remove the wall plate and mounting screws that cover
the old outlet.
3. Carefully remove the existing outlet from the wall box.
4. Disconnect the wiring from the old outlet. Note the
wire positions. Connect the charger outlet wires the
same way.
5. Connect the wires to the charger outlet:
• Black lead attaches to the hot wire(s)
• White lead attaches to the neutral wire(s)
• Green lead attaches to the ground wire(s)
You can attach the wires by:
(1) Inserting straight wires into the holes
(2) Wrapping the wires 3/4 of the way around the
terminal screws, making sure that the wires do not
overlap.
6. Tighten every screw and make sure that no bare
copper wire is exposed. When tightening screws, use
14 pounds-per-inch of torque.
7. Carefully insert the charger outlet into the wall box.
1
10. Restore power by replacing the fuse or turning on the
circuit breaker. The charger outlet is ready to use.
USING THE CHARGER OUTLET
• To charge USB devices (like mobile phones or tablets),
plug USB cables into the USB ports on the charger outlet
and into the USB ports on the devices.
• To power electrical devices (like lamps or notebooks),
plug them into the electrical outlets.
SPECIFICATIONS
Dimensions (L x W x H)
With Plate:
4.7 × 3 × 1.9 in. (120 × 76 × 47.5 mm)
Without Plate:
4.2 × 1.7 × 1.9 in. (106 x 43 x 47.5 mm)
Electrical
Receptacle Rating: 15Amp, 125VAC
USB Rating:
Two USB ports with total 2.4A, 5V DC
Line Voltage:
125V AC @ 60 Hz
Wire Terminals:
#14-#12 AWG
TECHNICAL SUPPORT
Please contact our Tech Support department with
installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday, 8:00am – 5:00pm
CST
2
1 YEAR LIMITED WARRANTY
Read the following terms and conditions carefully before
using the CyberPower R22U24CTR (the “CPS Product”).
By using the CPS Product, you consent to be bound by
the terms and conditions of this 1 Year Limited Warranty
(together referred to as this “Warranty”).
IF YOU DO NOT AGREE TO THE TERMS AND
CONDITIONS OF THIS WARRANTY, YOU SHOULD
RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO
USING IT.
Who is providing this Warranty, what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”)
provides this Limited Warranty. It only covers the original
purchaser and ends if you no longer own the CPS
Product. This warranty covers defects in materials and
workmanship in the CPS Product under normal use and
conditions. This Warranty covers the CPS Product for as
long as you own the CPS Product.
What must I do to make a warranty claim?
1. Pack and ship the product with a dated
Proof-of-Purchase receipt to CyberPower at 4241 12th
Ave E, Suite 400, Shakopee, MN 55379;
2. Clearly indicate on the outside of the packaging that
this is a WARRANTY RETURN;
3. Clearly include your name and address
a. on the outside packaging and
b. on a sheet of paper enclosed in the box with the
product that is being returned; and
4. You MUST prepay all shipping costs and you are
responsible for packaging and shipment.
Who pays for shipping?
We pay when we send items to you; you pay when you
send items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE
THAT WAS DAMAGED OR NEEDS TO BE REPLACED
DUE TO THE FAILURE OF THE CPS PRODUCT OR ANY
DATA THAT IS LOST AS A RESULT OF THE FAILURE
OR THE RESTORATION OF DATA OR RECORDS, OR
THE REINSTALLATION OF SOFTWARE.
2. This Warranty does not cover: misuse, modification,
operation or storage outside environmental limits of
the CPS Product or the equipment connected to it, or
for damage while in transit or in storage, nor if there
has been improper operation or maintenance, or use
with items not designed or intended for use with the
CPS Product, such as laser printers, appliances,
aquariums, medical or life support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the Initial Customer
are those provided by this Warranty.
1. This Warranty does not apply unless the CPS Product
and the connected equipment were connected to
properly wired and grounded outlets (including
compliance with electrical and safety codes of the
most current electrical code), without the use of any
adapters or other connectors.
2. The CPS Product must have been plugged directly into
the power source and the equipment connected to the
CPS Product must be directly connected in the CPS
Product, not “daisy-chained” together in serial fashion
with any extension cords, another Product or device
similar to the CPS Product, surge suppressor, or power
tap. Any such installation voids the Warranty.
3. The CPS Product and connected equipment must have
been used properly in a suitable and proper
environment, in conformance with any applicable
license, instruction manual, or warnings.
4. The CPS Product must have been used at all times
within the limitations on the CPS Product’s VA
capacity.
Where can I get more information?
Contact CyberPower at 4241 12th Ave E., STE 400,
Shakopee, MN 55379; call us at (877) 297-6937; or send
us an e-mail message at claims@cpsww.com.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the
Limited Warranty, and also allows the opportunity to be
notified of product enhancements, upgrades, and other
announcements. Registration is quick and easy. Go to
Product Registration page at www.cyberpower.com.
CONTACT INFORMATION
Cyber Power Systems, Inc. 4241 12th Avenue East Suite
400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPower.com
FCC Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Warning: Changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
ICES-003: This Class B digital apparatus complies with
Canadian ICES-003.
Please join CyberPower in caring for the
environment by recycling this manual.
This device is manufactured using environmentallysafe procedures in compliance with the Restriction of
Hazardous Substances (RoHS) directive.
www.cyberpower.com
3
4
K01-0000609-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising