CONGRATULATIONS ON YOUR PURCHASE Thank you for selecting the CyberPower PT200U02 dual USB wall plate. The information contained in this manual explains the features and operation of the PT200U02. Please take a few moments to read this manual. Dual USB Wall Plate PT200U02 1 2 FEATURES 1. USB Charging Ports* Connect and charge up to two USB devices. *USB outlets cannot be used as a USB hub. This device does not transfer data. 2. Two Outlets Two standard outlets. SPECIFICATIONS • Model Number: PT200U02 • Outlets: 2 AC Outlets • Electrical Rating: 125V/15A/1875W • Receptacle Rating: 15 Amp, 125 VAC, 60 Hz, 1875 W • USB Rating: Two USB ports with total 2.1 Amps CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT “daisy chain” wall plates. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. TECHNICAL SUPPORT Please contact our Tech Support department with installation, troubleshooting or general product questions. • Phone: 1-877-297-6937 • Email: email@example.com • Hours of Operation: Monday – Friday, 7:00am – 6:00pm CST USER’S MANUAL 1 ONE YEAR LIMITED WARRANTY Read the following terms and conditions carefully before using the CyberPower PT200U02 (the “CPS Product”). By using the CPS Product, you consent to be bound by the terms and conditions of this Limited Warranty. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT. Who is providing this Warranty, what does it cover? Cyber Power Systems (USA), Inc. (“CyberPower”) provides this Limited Warranty. It only covers the original purchaser and ends if you no longer own the CPS Product. This warranty covers defects in materials and workmanship in the CPS Product under normal use and conditions. This warranty covers the CPS Product for one year. What must I do to make a warranty claim? 1. Call (877) 297-6937 or write to us at Cyber Power Systems (USA), Inc., 4241 12th Ave. E., STE 400, Shakopee, MN 55379, or send us an e-mail message at firstname.lastname@example.org for instructions. 2. Identify the Product and the Purchase Date. 3. Provide a dated Proof-of-Purchase receipt (or other proof of the original purchase) and provide a description of the defect. 4. Pack and ship the product to CyberPower and all claim forms that are provided to you. Show the Claim Number on the shipping label or include it with the product. You must prepay all shipping costs, you are responsible for packaging and shipment, and you must pay the cost of the repair estimate. 5. Do each of these within ten days of the occurrence. What will CyberPower do to correct problems? CyberPower will inspect and examine the CPS Product. If the CPS Product is defective in material or workmanship, CyberPower will repair or replace it at CyberPower’s expense, or CyberPower will refund the full purchase price you paid for the CPS Product (purchase receipt showing price paid is required). What are the other limitations? The sole and exclusive remedies of the Initial Customer are those provided by this Warranty. 1. This Warranty does not apply unless the CPS Product and the connected equipment were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors. 2. The CPS Product must have been plugged directly into the power source and the equipment connected to the CPS Product must be directly connected in the CPS Product, not “daisy-chained” together in serial fashion with any extension cords, another Product or device similar to the CPS Product, surge suppressor, or power tap. Any such installation voids the Warranty. 3. The CPS Product and connected equipment must have been used properly in a suitable and proper environment, in conformance with any applicable license, instruction manual, or warnings. 4. The CPS Product must have been used at all times within the limitations on the CPS Product’s VA capacity. Where can I get more information? Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us at (877) 297-6937; or send us an e-mail message at email@example.com. PRODUCT REGISTRATION Prompt product registration assures coverage under the Limited Warranty, and also allows the opportunity to be notified of product enhancements, upgrades, and other announcements. Registration is quick and easy at www.cyberpowersystems.com/registration. CONTACT INFORMATION Cyber Power Systems (USA), Inc. 4241 12th Avenue East Suite 400 Shakopee, MN 55379 Toll-free: 1-877-297-6937 | CyberPower.com Who pays for shipping? We pay when we send items to you; you pay when you send items to us. What are some things this Warranty does not cover? 1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED OR NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE CPS PRODUCT OR ANY DATA THAT IS LOST AS A RESULT OF THE FAILURE OR THE RESTORATION OF DATA OR RECORDS, OR THE REINSTALLATION OF SOFTWARE. 2. This Warranty does not cover: misuse, modification, operation or storage outside environmental limits of the CPS Product or the equipment connected to it, or for damage while in transit or in storage, nor if there has been improper operation or maintenance, or use with items not designed or intended for use with the CPS Product, such as laser printers, appliances, aquariums, medical or life support devices, etc. 2 © 2017 Cyber Power Systems (USA), Inc. All rights reserved. This device is manufactured using environmentally-safe procedures in compliance with the Restriction of Hazardous Substances (RoHS) directive. © 2017 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project