CyberPower MP1045SW User Manual
FEATURES
1. Surge Protected Indicator
Illuminated when the surge protection feature is working properly.
2. Ground Indicator LED
Illuminated when the Ground protection feature is working properly.
3. Six Standard Outlets
4. Pivoting Outlets
Pivoting outlets for ease of use and convenience
5. USB Charging Ports*
Connect and charge up to two (2) USB devices using the surge protected USB powering ports.
*USB outlets cannot be used as a USB hub. This device does not transfer data.
8-Outlet Surge Protector
(6 AC & 2 USB ports)
P600WSURC1
1
2
4
3
MP1045SW
Surge Protector + USB
Combo Pack
5
SPECIFICATIONS
• Model Number: P600WSURC1
• Outlets: 6 Standard Outlets, 2 USB Charger Ports
• Surge Protection: 1200 Joules
• Electrical Rating: 125V/15A/1875W
• USB charger rating: 5V/2.1A total
• UL Clamping Voltage: UL 1449 3rd/400V (H-N, N-G), 500(H-G)
• Maximum Peak Current: 60,000A
• 3 AC Lines Protected: H-N: 30,000A, H-G: 15,000A, N-G: 15,000A;
(The maximum surge possible on household Wiring is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
TROUBLESHOOTING
If the Grounded indicator does not light when you plug in the surge protector,move the surge
protector to a different grounded three-prong AC outlet. If it still does not light, return the product
to dealer for assistance. If the surge protector proves to be working properly, your outlets may not
be properly grounded and should be inspected by a professional electrician.
If the Grounded indicator turns off after a period of use, the surge protection has been depleted.
Replace your surge protector.
If the Protected indicator does not light, the surge protector’s AC line is no longer protected from
surge. Replace the surge protector. The surge protector may have received a power surge or spike
beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The
surge protector has protected your connected equipment but it will not protect against future
surges and spikes.
User Manual
8-Outlet Surge Protector
(6 AC & 2 USB ports)
P604U
FEATURES
1. ON/OFF Reset Control Switch and Circuit Breaker
Controls power to all outlets. The switch is also a 15A breaker. When an overload occurs, it will
automatically switch off. To resume operation, ensure the overload condition is removed and
reset the surge protector by switching the unit ON.
2.Surge Protected Indicator
Illuminated when the surge protection is working properly.
3. Six Standard Outlets
4. USB Charging Ports*
Connect and charge up to two (2) USB devices using the surge protected USB charging ports.
*USB outlets cannot be used as a USB hub. This device does not transfer data.
1
2
3
CONGRATULATIONS ON YOUR PURCHASE
Thank you for selecting the CyberPower MP1045SW Surge Protector + USB
Combo Pack. The information contained in this brochure explains the features and
operation of the MP1045SW Surge Protector + USB Combo Pack. Please take a
few moments to read this manual.
4
SPECIFICATIONS
• Model Number: P604U
• Outlets: 6 Standard Outlets, 2 USB Charger Ports
• Surge Protection: 900 Joules
• Electrical Rating: 125V/15A/1875W
• USB charger rating 5V/2.1A total
• UL Clamping Voltage: UL 1449 3rd/400V(L-N,L-G,N-G)
• Maximum Peak Current: 45,000A
• 3 AC Lines Protected: L-N:15,000A, L-G:15,000A, N-G:15,000A
(The maximum surge possible on household wiring is 6,000 volts)
• Response Time: Less than 1 nanosecond
• Attenuation: Up to 32dB
• EMI/RFI Filtration: 150 kHz to 100 MHz
• Circuit Breaker: Resettable 15 Amp
TROUBLESHOOTING
If the ON/OFF is switched off, the 15 AMP circuit breaker may have tripped. Examine your
connected equipment and remove the device that is overloading the circuit. Then, turn the ON/OFF
switch back to RESET.
If the Protected indicator does not light, the surge protector’s AC line is no longer protected from
surge. Replace the surge protector. The surge protector may have received a power surge or spike
beyond its specified limits that overloaded the protection circuitry and rendered it inactive. The
surge protector has protected your connected equipment but it will not protect against future
surges and spikes.
CAUTION
What will CyberPower do to correct problems?
Where can I get more information?
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only
indoors.
DO NOT plug into another relocatable power tap. DO NOT “daisy chain” surge
protectors.
DO NOT use with any aquarium equipment. DO NOT use if properly grounded
outlets are not available. DO NOT install this device if there is not at least 10
meters (30 feet) or more of wire between the electrical outlet and electrical
service panel. This device features an internal protection that will disconnect
the surge protective component at the end of its useful life, but will maintain
power to the load – now unprotected.
CyberPower will inspect and examine the CPS Product. If the CPS Product is
defective in material or workmanship, CyberPower will repair or replace it at
CyberPower’s expense, or CyberPower will refund the full purchase price you
paid for the CPS Product (purchase receipt showing price paid is required). If the
CPS Product failed to protect any equipment plugged into it, we will also send
you forms for making your claim for the connected equipment. We will repair
or replace the equipment that was damaged because of the failure of the CPS
Product or pay you the fair market value (NOT REPLACEMENT COST) of the
equipment at of the time of the damage. We will use Orion Blue Book, another
a third-party valuation guide, eBay, Craigslist, or other source to establish that
amount. Our maximum liability is limited to $50,000 for the P604U and
$75,000 for the P600WSURC1.
Contact CyberPower at 4241 12th Ave E., STE 400, Shakopee, MN 55379; call us
at (877) 297-6937; or send us an e-mail message at claims@cpsww.com.
TECHNICAL SUPPORT
Please contact our Tech Support department with installation, troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday, 7:00am – 6:00pm CST
LIMITED WARRANTY AND CONNECTED EQUIPMENT GUARANTEE
Read the following terms and conditions carefully before using the CyberPower
P604U (the “CPS Product”).
By using the CPS Product, you consent to be bound by the terms and conditions
of this Limited Warranty and Connected Equipment Guarantee (together
referred to as this “Warranty”). IF YOU DO NOT AGREE TO THE TERMS AND
CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A
FULL REFUND PRIOR TO USING IT.
Who is providing this Warranty, what does it cover?
CyberPower Systems (USA), Inc. (“CyberPower”) provides this Limited
Warranty. It only covers the original purchaser and ends if you no longer own
the CPS Product. This warranty covers defects in materials and workmanship in
the CPS Product under normal use and conditions.
It also covers equipment connected to the CPS Product and
damaged because of the failure of the CPS Product.
This warranty covers the CPS Product and connected equipment for as long as
you own the CPS Product.
What must I do to make a warranty claim?
1. Call (877) 297-6937 or write to CyberPower, 4241 12th Ave. E., STE 400,
Shakopee, MN 55379 or send a message at claims@cpsww.com for
instructions.
2. Identify the Product, the Purchase Date, and the item(s) of Connected
Equipment.
3. Provide a dated Proof-of-Purchase receipt (or other proof of the original
purchase) and provide a description of the defect.
4. Pack and ship the product to CyberPower and, if requested, the item(s) of
Connected Equipment, and all claim forms that CyberPower provides to you.
Show the Claim Number on the shipping label or include it with the product.
You must prepay all shipping costs, you are responsible for packaging and
shipment, and you must pay the cost of the repair estimate.
5. Do each of these within ten days of the occurrence.
Who pays for shipping?
We pay when we send items to you; you pay when you send items to us.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the Limited Warranty, and
also allows the opportunity to be notified of product enhancements, upgrades,
and other announcements.
Registration is quick and easy at www.cpsww.com/register.
CONTACT INFORMATION
CyberPower Systems, Inc.
4241 12th Avenue East Suite 400 Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CPSww.com
CONFORMANCE APPROVALS
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER ANY SOFTWARE THAT WAS DAMAGED
OR NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE CPS PRODUCT OR
ANY DATA THAT IS LOST AS A
RESULT OF THE FAILURE OR THE RESTORATION OF DATA OR RECORDS, OR
THE REINSTALLATION
OF SOFTWARE.
This device complies with Part 15 of the FCC Rules.
2. This Warranty does not cover: misuse, modification, operation or storage
outside environmental limits of the CPS Product or the equipment
connected to it, or for damage while in transit or in storage, nor if there has
been improper operation or maintenance, or use with items not designed or
intended for use with the CPS Product, such as laser printers, appliances,
aquariums, medical or life support devices, etc.
Canadian ICES-003.
What are the other limitations?
Operation is subject to the following two conditions: 1. This device may not cause
harmful interference, and 2. This device must accept any interference received,
including interference that may cause undesired operation. Changes or modifications
not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This Class B digital apparatus complies with
Note: These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
The sole and exclusive remedies of the Initial Customer are those provided by
this Warranty.
correct the interference by one or more of the following measures: Reorient or relocate
1. This Warranty does not apply unless the CPS Product and the connected
equipment were connected to properly wired and grounded outlets
(including compliance with electrical and safety codes of the most current
electrical code), without the use of any adapters or other connectors.
Connect the equipment into an outlet on a circuit different from that to which the
2. The CPS Product must have been plugged directly into the power source and
the equipment connected to the CPS Product must be directly connected in
the CPS Product, not “daisy-chained” together in serial fashion with any
extension cords, another Product or device similar to the CPS Product, surge
suppressor, or power tap. Any such installation voids the Warranty.
the receiving antenna. Increase the separation between the equipment and receiver.
receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device is manufactured using environmentally-safe procedures in compliance with
the Restriction of Hazardous Substances (RoHS) directive.
Please join CyberPower in caring for the
environment by recycling this manual.
This device is manufactured using environmentallysafe procedures in compliance with the Restriction
of Hazardous Substances (RoHS) directive.
3. The CPS Product and connected equipment must have been used properly in
a suitable and proper environment, in conformance with any applicable
license, instruction manual, or warnings.
4. The CPS Product must have been used at all times within the limitations on
the CPS Product’s VA capacity.
K01-1101018-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising