CyberPower | GC106U | User manual | CyberPower GC106U User Manual

CyberPower GC106U User Manual
INSTRUCTIONS
1. Plug the device into a standard grounding wall receptacle by fully
inserting the plug and ensure that there are no exposed conductors.
2. Make sure the electronic equipment is turned off before plugging
into the device’s outlet. Do not use extension cords to connect
equipment to the device.
3. Connected equipment can now be turned on.
1-Outlet USB Charging Cord
GC106U
SPECIFICATIONS
• Model Number: GC106U
• Outlets: 1
• Electrical Rating: 125 V/10 A/1250 W/60 Hz
• USB Charger Rating: 5 V/2.4 A total
• Operating Temperature: 32 °F to 95 °F / 0 °C to 35 °C
• Maximum Operating Elevation: 10,000 feet / 3,000 meters
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry
locations and only indoors. DO NOT plug into another relocatable
power tap. DO NOT “daisy chain” surge protectors. DO NOT use with
any aquarium equipment. DO NOT use if properly grounded outlets are
not available. DO NOT use for medical or life support equipment.
This device features an internal protection that will disconnect the
surge protective component at the end of its useful life, but it will
maintain unprotected power to the load.
TECHNICAL SUPPORT
Please contact our Tech Support department with installation,
troubleshooting, or general product questions.
• Phone: 1-877-297-6937
• Email: tech@cpsww.com
• Hours of Operation: Monday – Friday 7:00am – 6:00pm CST
1-YEAR LIMITED WARRANTY
Read the following terms and conditions carefully before using the CyberPower
GC106U (the “product”). By using the product, you consent to be bound by the
terms and conditions of this 1-year limited warranty. IF YOU DO NOT AGREE TO
THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN
THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.
USER MANUAL
Who is providing this Warranty, and what does it cover?
Cyber Power Systems (USA), Inc. (“CyberPower”) provides this 1-year limited
warranty. It only covers the original purchaser and ends if you no longer own the
product. This warranty covers defects in materials and workmanship in the
product under normal use and conditions. This warranty covers the product for
as long as you own the product, up to 1 year from date of purchase.
11
What must I do to make a warranty claim?
1. Call (877) 297-6937, or write to us at Cyber Power Systems (USA), Inc., 4241
12th Ave. E., STE 400, Shakopee, MN 55379, or send us an email at
claims@cpsww.com within 10 days of the occurrence for instructions.
2. Identify the product and the purchase date.
3. Provide a dated purchase receipt (or other proof of the original purchase) and
provide a description of the defect.
4. Pack and ship the product to CyberPower and all claim forms that are provided
to you. Show the claim number on the shipping label, or include it with the
product. You must prepay all shipping costs. You are responsible for packaging
and shipment, and you must pay the cost of the repair estimate.
5. Do each of these within ten days of the occurrence.
What will CyberPower do to correct problems?
CyberPower will inspect and examine the product. If the product is defective in
material or workmanship, CyberPower will replace it at CyberPower’s expense, or
CyberPower will refund the full purchase price you paid for the product
(purchase receipt showing price paid is required).
Who pays for shipping?
We pay shipping when we send items to you; you pay when you send items to us.
What are some things this Warranty does not cover?
1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT WAS
DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED DUE TO THE
FAILURE OF THE PRODUCT, OR ANY DATA THAT IS LOST AS A RESULT OF
THE FAILURE. THIS WARRANTY DOES NOT COVER THE RESTORATION OF
DATA OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
2. This warranty does not cover: misuse, modification, operation, or storage
outside of the environmental limits of the product or the equipment connected
to it. It does not cover damage while in transit or in storage; if there has been
improper operation or maintenance, or use with items not designed or
intended for use with the product, such as laser printers, appliances, aquariums,
medical, or life support devices, etc.
What are the other limitations?
The sole and exclusive remedies of the initial customer are those provided by
this warranty.
1. This warranty does not apply unless the product and the connected equipment
were connected to properly wired and grounded outlets (including compliance
with electrical and safety codes of the most current electrical code), without
the use of any adapters or other connectors.
2. The product must have been plugged directly into the power source. The
equipment connected to the product must be directly connected in the
product, not “daisy chained” together in serial fashion with any extension cords,
another product, or device similar to the product, surge suppressor, or power tap.
Any such installation voids the warranty.
3. The product and connected equipment must have been used properly in a
suitable environment, in conformance with any applicable license, instruction
manual, or warnings.
4. The product must have been used at all times within the limitations on the
product’s maximum rated wattage.
Where can I get more information?
Contact us at:
Cyber Power Systems (USA), Inc.
4241 12th Avenue East Suite 400
Shakopee, MN 55379;
Call us at (877) 297-6937;
Send us an email at claims@cpsww.com.
PRODUCT REGISTRATION
Prompt product registration assures coverage under the limited lifetime warranty,
and also allows the opportunity of notifications for product enhancements,
upgrades, and other announcements. Registration is quick and easy. Go to the
Product Registration Page at www.CyberPowerSystems.com/registration.
CONTACT INFORMATION
Cyber Power Systems (USA), Inc.
4241 12th Avenue East Suite 400
Shakopee, MN 55379
Toll-free: 1-877-297-6937 | CyberPowerSystems.com
CONFORMANCE APPROVAL
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This Class B digital apparatus complies with Canadian ICES-003.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Please join CyberPower in caring for the
environment by recycling this manual.
This device is manufactured using environmentally-safe procedures in
compliance with the Restriction of Hazardous Substances (RoHS) directive.
© 2018 Cyber Power Systems (USA), Inc. All rights reserved.
All other trademarks are the property of their respective owners.
2
1
Copyright © 2018 Cyber Power Systems (USA), Inc. All rights reserved.
CyberPowerSystems.com
3
1
K01-0000697-00
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising