Rangemaster | Classic lidded 90 Dual Fuel | User guide | Rangemaster Classic lidded 90 Dual Fuel User Guide

Rangemaster Classic lidded 90 Dual Fuel User Guide
Built from experience
USER GUIDE &
INSTALLATION INSTRUCTIONS
Classic | Rangemaster | Toledo
90 Dual Fuel Lidded
Search Rangemaster UK
Show off your kitchen with ...
This is
#MyRangemaster
Simply snap and share a picture of your kitchen and tag
#MyRangemaster for the chance to win £200 of
Rangemaster cookware. If selected we will also send a
photographer round to professionally photograph you at
home with your range. You might even feature in some
of the UK’s top home interest titles!
To enter all you have to do is send in photos of your
Rangemaster kitchen and tell us in one sentence what
makes Rangemaster the heart of your kitchen? Entries
can be posted on our Facebook page, Instagram or Twitter
by tagging @RangemasterUK and using #MyRangemaster.
Or, if you prefer, simply send in your entry via e-mail to
marketing@agarangemaster.co.uk.
Rangemaster will feature a number of entries on the
website online gallery and on the Rangemaster Facebook
page, and some kitchens may be selected to be
professionally photographed.
*
Terms & Conditions Apply
Our range cookers are well known for providing the best
possible cooking performance and years of faithful service.
However, a great cooker alone cannot guarantee perfect
results every time. The other vital ingredients are of course
enthusiasm and quality cookware.
We offer cookware to work perfectly with all fuel types
manufactured by Rangemaster, including induction hobs.
You can be assured of functionality with style, as well as the
quality and meticulous attention to detail you expect from
the pioneers of range cooking.
Visit www.rangemastercookshop.co.uk
Terms & Conditions
1. This is my Rangemaster is open to residents of UK mainland only, aged 18 years & over. 2. All entries should be submitted to the advertised e-mail address, or Rangemaster UK Facebook, Instagram or Twitter page
using the advertised hashtag & tag. 3. If we would like to professionally photograph your kitchen, you will be contacted via e-mail, Facebook / Twitter message or Instagram comment. 4. We cannot guarantee your
kitchen will be professionally photographed. 4. Any photographs received and professional photographs taken will belong to AGA Rangemaster plc with full usage rights. E&OE.
*
Contents
1.
2.
Before You Start…
1
7.
Troubleshooting
15
Important!
1
Installation and Maintenance
1
8.
Installation
17
Peculiar Smells
1
Dear Installer
17
If You Smell Gas
1
Safety Requirements and Regulations
17
Ventilation
1
Provision of Ventilation
17
Personal Safety
1
Location of Cooker
18
Cooker Care
2
Conversion
18
Cleaning
2
Positioning the Cooker
19
Moving the Cooker
20
Fitting the Stability Bracket or Chain
20
21
Cooker Overview
3
Glass Lid
3
Hotplate Burners
4
Repositioning the Cooker Following
Connection
Wok Burner (Classic & Toledo models)
4
Conversion to Another Gas
21
The Wok Cradle (optional extra)
5
Levelling
21
The Griddle
5
Fitting the Handles and Handrail
The Grill
6
The Ovens
6
Operating the Ovens
6
Accessories
7
Main Oven Light
7
3.
The Clock
8
4.
Cooking Tips
10
9.
(Classic only)
21
Gas Connection
22
Electrical Connection
23
Final Checks
23
Fitting the Plinth
23
Customer Care
23
Conversion to LP Gas
24
Injectors
24
Tips on Cooking with the Timer
10
Tap Adjustment
24
General Oven Tips
10
Stick on Label
25
Pressure Testing
25
5.
Cooking Table
11
6.
Cleaning Your Cooker
12
10. Circuit Diagram
26
11. Technical Data
27
Essential Information
12
Hotplate Burners
12
Classic
27
The Griddle
12
Rangemaster
28
Grill
13
Toledo
29
Control Panel, Doors and Glass Lid
13
Hotplate Efficiency Toledo & Classic
30
Ovens
13
Hotplate Efficiency Rangemaster
31
The Tall Oven
14
Oven Data: Classic
32
Cleaning Table
14
Oven Data: Toledo and Rangemaster
33
Classic, Rangemaster and Toledo 90 Dual Fuel
iii
U110098-07
iv
1. Before You Start…
This User Guide covers a number of different models.
Although some of the illustrations will look different to
your particular model the functions will be the same. We
hope the meaning is clear.
If You Smell Gas
•
•
•
•
•
•
•
Your cooker should give you many years of trouble-free
cooking if installed and operated correctly. It is important
that you read this section before you start, particularly if you
have not used a dual fuel cooker before.
Important!
DO NOT turn electric switches on or off
DO NOT smoke
DO NOT use naked flames
DO turn off the gas at the meter or cylinder
DO open doors and windows to get rid of the gas
DO keep people away from the area affected
Call your gas supplier
Ventilation
CAUTION: This appliance is for cooking purposes
nn
only. It must not be used for other purposes, for
CAUTION: The use of a gas cooking appliance results
nn
in the production of heat and moisture in the room
example room heating. Using it for any other
purpose could invalidate any warranty or liability
claim. Besides invalidating claims this wastes fuel
and may overheat the control knobs.
in which it is installed. Therefore, make sure that the
kitchen is well ventilated: keep natural ventilation
holes open or install a powered cooker hood that
vents outside. If you have several burners on, or use
the cooker for a long time, open a window or turn on
an extractor fan.
Installation and Maintenance
This cooker must be installed in accordance with the relevant
instructions in this booklet, with the relevant national and
local regulations, and with the local gas and electricity supply
companies’ requirements.
Personal Safety
DO NOT modify this appliance.
nn
This appliance can be used by children aged from 8
nn
years and above and persons with reduced physical,
Make sure that the gas supply is turned on and that the
cooker is wired in and switched on (the cooker needs
electricity).
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
Set the clock to make sure that the oven is functional – see
the relevant section in this manual.
It is recommended that this appliance is serviced annually.
Only a qualified service engineer should service the cooker,
and only approved spare parts should be used.
Always allow the cooker to cool and then switch it off at the
mains before cleaning or carrying out any maintenance work,
unless specified otherwise in this guide.
WARNING: The appliance and its accessible parts
nn
become hot during use and will retain heat even
after you have stopped cooking. Care should be
taken to avoid touching heating elements. Children
less than 8 years of age shall be kept away unless
continuously supervised.
Peculiar Smells
When you first use your cooker it may give off an odour. This
should stop after use.
This appliance is not intended for use by young
nn
children or infirm persons unless they have been
Before using your cooker for the first time, make sure that all
packing materials have been removed and then, to dispel
manufacturing odours, turn all the ovens to 200 °C and run
for at least an hour.
adequately supervised by a responsible person to
make sure that they can use the appliance safely.
CAUTION: A long term cooking process has to be
nn
supervised from time to time. A short term cooking
Before using the grill for the first time you should also turn on
the grill and run for 30 minutes with the grill pan in position,
pushed fully back, and the grill door open.
process has to be supervised continuously.
Danger of fire: DO NOT store items on the cooking
nn
surfaces.
Make sure the room is well ventilated to the outside air
(see ‘Ventilation’ below). People with respiratory or allergy
problems should vacate the area for this brief period.
To avoid overheating, DO NOT install the cooker
nn
behind a decorative door.
Accessible parts will become hot during use and will
nn
retain heat even after you have stopped cooking.
Keep babies and children away from the cooker and
never wear loose-fitting or hanging clothes when
using the appliance.
1
DO NOT use a steam cleaner on your cooker.
nn
WARNING!
nn
Unattended cooking on a hob with fat or oil can be
Always be certain that the controls are in the OFF position
when the oven is not in use, and before attempting to clean
the cooker.
dangerous and may result in fire.
NEVER leave a chip pan unattended. Always heat fat
nn
slowly, and watch as it heats. Deep fry pans should
When the ovens are on, DO NOT open the doors
nn
for longer than necessary to insert and remove
be only one third full of fat. Filling the pan too full
of fat can cause spill over when food is added. If you
use a combination of oils or fats in frying, stir them
together before heating, or as the fats melt.
contents. The control knobs will become hot and
may cause cosmetic failure.
When using the grill, make sure that the grill pan
nn
is in position and pushed fully in, otherwise the
Foods for frying should be as dry as possible. Frost on frozen
foods or moisture on fresh foods can cause hot fat to bubble
up and over the sides of the pan. Carefully watch for spills or
overheating of foods when frying at high or medium high
temperatures. Never try to move a pan of hot fat, especially a
deep fat fryer. Wait until the fat is cool.
control knobs may become very hot.
DO NOT use harsh abrasive cleaners or sharp metal
nn
scrapers to clean the oven door glass or glass lid
since they can scratch the surface, which may result
in shattering of the glass.
Always keep combustible materials, e.g. curtains, and
flammable liquids a safe distance away from your cooker.
Do not use the top of the flue (the slots along the back of
the cooker) for warming plates, dishes, drying tea towels or
softening butter.
DO NOT spray aerosols in the vicinity of the cooker
nn
while it is on.
DO NOT use water on grease fires and never pick
nn
up a flaming pan. Turn the controls off and then
smother a flaming pan on a surface unit by covering
the pan completely with a well fitting lid or baking
tray. If available, use a multi-purpose dry chemical
or foam-type fire extinguisher.
Use dry oven gloves when applicable – using damp gloves
might result in steam burns when you touch a hot surface.
Do not use a towel or other bulky cloth in place of a glove – it
might catch fire if brought into contact with a hot surface.
NEVER operate the cooker with wet hands.
nn
DO NOT use aluminium foil to cover shelves, linings
nn
or the oven roof.
Cooking high moisture content foods can create a ‘steam
burst’ when the oven door is opened (Fig. 1.1). When
opening the oven stand well back and allow any steam to
disperse.
DO NOT use hotplate protectors, foil or hotplate
nn
covers of any description. These may affect the safe
Take care that no water seeps into the appliance.
This appliance is heavy so take care when moving it.
nn
The appliance is not intended to be operated by
nn
means of external timer or separated remote-control
use of your hotplate burners and are potentially
hazardous to health.
NEVER heat unopened food containers. Pressure
nn
build up may make the containers burst and cause
system.
injury.
Cooker Care
DO NOT use unstable saucepans. Always make sure
that you position the handles away from the edge of
the hotplate.
nn
As steam can condense to water droplets on the cool outer
trim of the oven, it may be necessary during cooking to wipe
away any moisture with a soft cloth. This will also help to
prevent soiling and discolouration of the oven exterior by
cooking vapours.
DO NOT use cooking vessels on the hotplate that
nn
overlap the edges.
Never leave the hotplate unattended at high heat settings.
Pans boiling over can cause smoking, and greasy spills may
catch on fire. Use a deep fat thermometer whenever possible
to prevent fat overheating beyond the smoking point.
Cleaning
In the interests of hygiene and safety, the cooker should be
kept clean at all times as a build up in fats and other food
stuff could result in a fire.
Clean only the parts listed in this guide. Clean with caution. If
a wet sponge or cloth is used to wipe spills on a hot surface,
be careful to avoid steam burns. Some cleaners can produce
noxious fumes if applied to a hot surface.
Fig. 1.1
ArtNo.324-0001 Steam burst
2
2. Cooker Overview
DocNo.020-0003GB - Overview - 90DF - Elan
A
Fig. 2.1
B
C LASSIC
90
C
D
F
E
ArtNo.210-0013 - 90DF - Classic anno lidded
The 90 dual fuel cooker (Fig. 2.1) has the following features:
A.
B.
C.
D.
E.
F.
Fig. 2.2
Glass lid
5 hotplate burners including:
– A wok burner (Classic & Toledo models) or
– A high burner (Rangemaster model)
A control panel
A grill
Main fan oven
Tall fan oven
Glass Lid
This model has a glass lid over the hotplate. To open, simply
lift it at the front (Fig. 2.2).
The glass lid has a safety device which cuts off the hotplate
burner gas supply if the lid is accidentally closed with a
burner on. DO NOT use this to turn the burners off. The gas
supply is restored when the lid is raised.
The toughened glass lid is not intended as a work
nn
surface and should not be used for this purpose. A
scratch could cause the glass to shatter.
3
Hotplate Burners
Fig. 2.3
The drawing by each of the central knobs indicates which
burner that knob controls.
Each burner has a Flame Supervision Device (FSD) that
prevents the flow of gas if the flame goes out.
When the igniter button is pressed in, sparks will be
made at every burner – this is normal. Do not attempt to
disassemble or clean around any burner while another
burner is on, otherwise an electric shock could result.
To light a burner, press the igniter button, and push in and
turn the associated control knob counter-clockwise to the
high position as indicated by the large flame symbol (), (Fig.
2.3).
Fig. 2.4
The igniter should spark and light the gas. Keep holding the
knob pressed in to let the gas through to the burner for about
ten seconds.
If, when you let go of the control knob, the burner goes out,
then the FSD has not been bypassed. Turn the control knob
to the OFF position and wait for one minute before you try
again, this time making sure to hold in the control knob for
slightly longer.
Fig. 2.5
Adjust the flame height to suit by turning the knob (Fig. 2.4).
On this cooker the low position is beyond high, not between
high and off. The ‘small flame’ marks the low setting.
Fig. 2.6
If a burner flame goes out, turn off the control knob and
leave it for one minute before relighting it.
ArtNo.311-0002 Pan with rim
Make sure that the flames are under the pans. Using a lid will
help the contents boil more quickly (Fig. 2.5).
ArtNo.311-0001 Right pans gas
Large pans should be spaced well apart.
Fig. 2.7
Pans and kettles with concave bases or down-turned base
rims should not be used (Fig. 2.6).
Fig. 2.8
Simmering aids, such as asbestos or mesh mats, are
NOT recommended (Fig. 2.7). They will reduce burner
performance and could damage the pan supports.
Art No. 311-0003 Simmer aids
You should also avoid using unstable and misshapen pans
that may tilt easily, and pans with a very small base diameter,
e.g. milk pans, single egg poachers (Fig. 2.8).
ArtNo.311-0004 Tipping wok
The minimum recommended pan diameter is 120 mm. The
maximum allowable pan base diameter is 260 mm.
Fig. 2.9
DO NOT use cooking vessels on the hotplate that overlap the
edges.
Wok Burner (Classic & Toledo models)
The wok burner is designed to provide even heat over a large
area. It is ideal for large pans and stir-frying (Fig. 2.9).
For heating smaller pans, the aforementioned hotplate
burners may be more efficient.
ArtNo.311-0046 - Elan Wok burner
You can remove the burner parts for cleaning; see ‘Cleaning
Your Cooker’.
You should wipe the enamel top surface of the cooker around
the hotplate burners as soon as possible after spills occur. Try
to wipe them off while the enamel is still warm.
4
Note: The use of aluminium pans may cause metallic marking
of the pan supports. This does not affect the durability of the
enamel and may be cleaned off with an appropriate metal
cleaner.
Fig. 2.10
The Wok Cradle (optional extra)
The wok cradle is designed to fit a Professional 35 cm wok. If
you use a different wok, make sure that it fits the cradle. woks
vary very widely in size and shape. It is important that the
wok sits down on the pan support – however, if the wok is too
small, the cradle will not support it properly (Fig. 2.10).
ArtNo.311-0006 Correct wok sizes
The cradle should be used on the wok burner only. When you
fit the cradle, check that it is supported properly on a pan
support and the wok is sitting level in the cradle (Fig. 2.11).
Fig. 2.11
The cradle will get very hot in use – allow plenty of time for it
to cool before you pick it up.
The Griddle
ArtNo.311-0007 Wok stand close-up
The griddle fits the left-hand single pan support, front to back
(Fig. 2.12). It is designed for cooking food on directly. DO
NOT use pans of any kind on it. The griddle surface is nonstick and metal cooking utensils (e.g. spatulas) will damage
the surface. Use heat resistant plastic or wooden utensils.
Fig. 2.12
DO NOT put it crossways – it will not fit properly and
nn
will be unstable (Fig. 2.13).
DO NOT put it on any other burner – it is not
nn
designed to fit in any of the other pan supports.
Position the griddle over the hotplate burners resting on the
pan support. Check that it is securely located.
Fig. 2.13
The griddle can be lightly brushed with cooking oil before
use (Fig. 2.14). Light the hotplate burners. Adjust the flame
heights to suit.
Preheat the griddle for a maximum of 5 minutes before
adding food. Leaving it longer may cause damage. Turn the
control knobs towards the low position, marked with the
small flame symbol, to reduce the burner flames.
Always leave space around the griddle for the gases
nn
to escape.
NEVER fit two griddles side by side (Fig. 2.15).
nn
ArtNo.311-0009 Oil on griddle
After cooking, allow the griddle to cool before cleaning.
Fig. 2.14
Fig. 2.15
ArtNo.311-0008 Griddle positioning
5
The Grill
Fig. 2.16
Open the door and pull the grill pan forward using the handle
(Fig. 2.16).
The grill has two elements that allow either the whole area of
the pan to be heated or just the right-hand half.
ArtNo.330-0003 - Grill pan w handle pulled forwards
Adjust the heat to suit by turning the control knob. To heat
the whole grill, turn the control knob clockwise (Fig. 2.17).
To heat the right-hand half only, turn the control knob
counter-clockwise. The neon indicator light by the grill
control will come on.
Fig. 2.17
For best results, you should leave the grill pan in the grill
chamber and preheat the appropriate part(s) of the grill for
two minutes. The grill trivet can be removed and the food
placed on it while you are waiting for the grill to preheat.
DO NOT leave the grill on for more than a few
nn
moments without the grill pan underneath it,
ArtNo.235-0007 - Classic
DL grill control
otherwise the knobs may become hot.
Once the grill has preheated, slide the grill pan out again.
With the trivet back in place with the food on it, slide the grill
pan back onto the side supports. Make sure it is pushed right
in and touches the back stop.
Fig. 2.18
Accessible parts may be hot when the grill is in use.
nn
Young children should be kept away.
The grill pan trivet can be turned over to give two grilling
positions (Fig. 2.18).
ArtNo.331-0002 Grill pan high/low position
Never close the grill door when the grill is on.
nn
The Ovens
The clock must be set to the time of day before the ovens
will work. See the following section on ‘The Clock’ for
instructions on setting the time of day.
Fig. 2.19
References to ‘left-hand’ and ‘right-hand’ ovens apply as viewed
from the front of the appliance.
Both ovens are fan ovens that circulate hot air continuously,
which means faster, more even cooking.
ArtNo.235-0004 Classic DL oven 1
The recommended cooking temperatures for a fan oven are
generally lower than a conventional oven.
Note: Please remember that all cookers vary so temperatures
in your new ovens may differ to those in your previous
cooker.
Operating the Ovens
Fig. 2.20
Turn the oven knob to the desired temperature (Fig. 2.19).
The oven indicator light will glow until the oven has reached
the temperature selected (Fig. 2.20). It will then cycle on and
off during cooking.
ArtNo.235-0005 - Classic
DL oven control 2
6
Accessories
Fig. 2.21
Oven Shelves – Left-hand (Main) Oven
Shelf guard
The oven shelves (Fig. 2.21) are retained when pulled
forward but can be easily removed and refitted.
Pull the shelf forward until the back of the shelf is stopped by
the shelf stop bumps in the oven sides (Fig. 2.22).
Lift up the front of the shelf so the back of the shelf will pass
under the shelf stop and then pull the shelf forward (Fig. 2.23).
Front
To refit the shelf, line up the shelf with a groove in the oven
side and push the shelf back until the ends hit the shelf stop.
Lift up the front so the shelf ends clear the shelf stops, and
then lower the front so that the shelf is level and push it fully
back (Fig. 2.24).
Fig. 2.22
Fig. 2.23
Oven Shelves – Right-hand (Tall) Oven
The tall oven is supplied with four flat cooking shelves
(Fig. 2.25), and a plate-warming shelf (Fig. 2.26).
ArtNo.320-0011 Removing the shelf 1
When using the tall oven, you can cook on all four shelves at
the same time, but make sure that they are well spaced out to
allow the hot air to circulate.
Fig. 2.24
ArtNo.320-0012 Removing the shelf 2
Fig. 2.25
The Handyrack (Main Oven)
ArtNo.324-0002 Oven shelf
The Handyrack (Fig. 2.27) fits to the left-hand oven door
only. Food cooking on it is easy to attend to, because it is
accessible when the door is open.
ArtNo.320-0013 Removing the shelf 3
The maximum weight that can be held by the Handyrack
is 5.5 kg (12 lb). It should only be used with the supplied
roasting tin, which is designed to fit the Handyrack. Any other
vessel could be unstable.
Fig. 2.26
Fig. 2.27
It can be fitted at two different heights. One of the oven
shelves must be removed and the other positioned to suit.
ArtNo.324-0010 Plate warming shelf
When the Handyrack is used in its highest position, other
dishes can be cooked on the bottom shelf position or base of
the oven.
ArtNo.320-0014 Handyrack on LH door
Fig. 2.28
When the Handyrack is used in its lowest position, other
dishes can be cooked on the second shelf position or base of
the oven.
Fig. 2.29
To fit the Handyrack, locate one side of it on the door bracket
(Fig. 2.28).
Then spring the other side out to clip it onto the other
bracket (Fig. 2.29).
ArtNo.320-0015
Fitting the Handyack 1
Main Oven Light
ArtNo.320-0016
Fitting the handyrack 2
Fig. 2.30
Press the button to turn the light on (Fig. 2.30).
If the oven light fails, turn off the power supply before
changing the bulb. See the ‘Troubleshooting’ section for
details on how to change the bulb.
ArtNo.320-0017
Main oven light
7
3. The Clock
You can use the timer (Fig. 3.1) to turn the oven(s) on and off.
The clock must be set to the time of day before the oven(s)
will work.
Fig. 3.1
Table 3.1 describes the symbols shown on the digital display.
ArtNo.302-0002 - 6BC annotated
Setting the Time of Day
A
When the cooker is first connected to the mains, or if there
has been a prolonged power interruption, the clock display
flashes [ 0.00 ] and [AUTO].
B
C
D
E
F
During the time setting process the centre dot will flash.
When the process is complete the dot will stop flashing and
the [] symbol will be displayed.
A – Minute minder, B – ‘Cook’ time, C – ‘Stop’ time, D – Manual,
E & F – Time setting buttons
Symbol
Function
Notes
[]
Minute Minder is active
The time of day can be set in two ways:
• Press and hold the [] button. Now press the [+] or [-]
buttons to increase or decrease the time (Fig. 3.2). Holding
the [+] or [-] buttons for more than 2 seconds will advance
/ decrease the set time quickly. Release the buttons to set
the time of day.
• Press and hold both the [] and [] buttons down
(Fig. 3.3). Now press the [+] button (or [–] button) until the
correct time shows.
Do not forget that it is a 24-hour clock.
If the ‘cook’ [] symbol is not
displayed the program has either:
[]
Oven(s) can be operated
[AUTO]
Oven(s) are being
controlled in
semi-automatic or
automatic mode
[P]
Self clean (pyrolytic)
mode has been enabled
[dot]
Flashes during setting
the time of day
• ended and the oven(s) are nonoperational
• the oven(s) are being controlled
by an automatic program that
has not started
If you need to reset the clock/cooker, turn off the power and
wait several minutes, then start again.
Automatic Dimming
Providing there are no automatic programs set, and the
minute minder is not active, your clock will automatically dim
during the hours between 22:00 and 06:00.
Minute Minder
Press and hold the [] button (Fig. 3.4), and then press the
[+] button (or [–] button) until the length of time you want to
cook for is shown (Fig. 3.5).
Your cooker may not have this
pyrolytic function
Table 3.1
Fig. 3.2
Fig. 3.3
You can check the time remaining by pressing []. When the
beeper sounds cancel it by pressing any button.
ArtNo.302-0002 - 6BC annotated
Fig. 3.4
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
To reset the minute minder time; simultaneously press the [+]
and [-] buttons.
Note: this will clear all automatic programs.
Fig. 3.5
ArtNo.302-0002 - 6BC annotated
•
The ‘cook period’, which is the length of time you
want the oven to cook for.
•
The ‘stop time’, which is the time of day you want the
oven to stop cooking.
Setting a Cook Duration
Press and hold the [] button and set the required ‘cook
period’ by pressing the [+] button (or [–] button) (Fig. 3.6). The
clock will now control the cook period of your oven(s). The
[] symbol and [AUTO] will be displayed.
Fig. 3.6
Once the ‘cook period’ is reached, the beeper sounds and the
[AUTO] symbol flashes. Turn the oven control knob to 0 and
then press any button to stop the beep. Press [] to return to
manual cooking.
ArtNo.302-0002 - 6BC annotated
8
Setting a Cook End Time
Press and hold the ‘stop time’ [] button (Fig. 3.7) and then
press the [+] button (or [–] button) until the required ‘stop
time’ shows (Fig. 3.8). The [] symbol and [AUTO] will show
in the display.
Fig. 3.7
Once the ‘stop time’ is reached, the beeper sounds and the
[AUTO] symbol flashes. Turn the oven control knob to 0 and
then press any button to stop the beep. Press [] to return to
manual cooking.
To Start and Stop the Ovens Automatically
Before you set the clock for automatic operation you must
have two numbers clearly in mind – the ‘cook period’ and the
‘stop time’.
Fig. 3.8
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
Fig. 3.9
Note: You cannot set a start time directly – this is set
automatically by setting the ‘cook period’ and the ‘stop time’.
Fig. 3.10
ArtNo.302-0002 - 6BC annotated
Press and hold the [] button (Fig. 3.9) and then press the
[+] button (or [–] button) until the required ‘cook period’ shows
(Fig. 3.10).
ArtNo.302-0002 - 6BC annotated
Fig. 3.11
Fig. 3.12
Now press and hold the [] button (Fig. 3.11) and then press
the [+] button (or [–] button) until the required ‘stop time’
shows (Fig. 3.12). Release the buttons.
ArtNo.302-0002 - 6BC annotated
ArtNo.302-0002 - 6BC annotated
[AUTO] will now show in the display (Fig. 3.13).
Set the oven(s) to the required temperature. When cooking
is finished [AUTO] will flash and the beeper will sound. Turn
the oven knob(s) to the OFF position first, and then press any
button once to stop the beep; press the [] button to return
to manual cooking.
Fig. 3.13
If you are out, do not worry about the beeper going off, it
stops after a while. When you return, turn the oven knob(s) to
0 first, and then press [] to return to manual cooking.
AUTO is Showing, You Want to Reset to Manual Cooking
To return to manual cooking mode from an Automatic
setting, simultaneously press the [+] and [-] key, this will clear
the automatic program and return to manual mode.
Fig. 3.14
ArtNo.302-0002 - 6BC annotated
Please note that this action will also clear the [Minute Minder]
setting.
Beeper Tone Adjustment.
The beeper tone can be adjusted to three different levels.
ArtNo.302-0002 - 6BC annotated
Symbol
Function
Notes
[]
Sets the Minute Minder
Used with the [+] and [-] buttons
[]
Sets the duration / cook
period
Used with the [+] and [-] buttons
[]
Sets the end / stop cook
time
Used with the [+] and [-] buttons
[ ]
Allows the time of day to
be set when ‘AUTO’ is not Used with the [+] and [-] buttons
or
active
[] & []
Whilst in the time of day mode, press and hold the [-] button
for a period until the display shows the Tone Bars (Fig. 3.14).
Release the [-] button and immediately press again, this will
adjust the tone down by a bar. Continue the process until a
comfortable, tone is reached.
[ ]
Resets the cooking
control to manual
Please note, during a power reset the clock will remember the
last tone set.
[-]
Decreases time interval
Holding this button down
allows a quick set
For an overview of the functions refer to Table 3.2.
[+]
Increases time interval
Holding this button down
allows a quick set
[+] & [-]
Clears all ‘AUTO’ and
minute minder programs
Table 3.2
9
4. Cooking Tips
Tips on Cooking with the Timer
General Oven Tips
If you want to cook more than one dish, choose dishes that
require approximately the same cooking time. However,
dishes can be ‘slowed down’ slightly by using small containers
and covering them with aluminium foil, or ‘speeded up’
slightly by cooking smaller quantities or placing them in
larger containers.
The wire shelves should always be pushed firmly to the back
of the oven.
Baking trays with food cooking on them should be placed
level with the front edge of the oven’s wire shelves. Other
containers should be placed centrally. Keep all trays and
containers away from the back of the oven, as overbrowning
of the food may occur.
Very perishable foods such as pork or fish should be avoided
if a long delay period is planned, especially in hot weather.
For even browning, the maximum recommended size of a
baking tray is 340 mm (13 ½”) by 340 mm (13 ½”) in the main
oven and 232 mm (9 1/8”) and 321 mm (12 5/8”) in the tall oven.
DO NOT place warm food in the oven to be timed.
nn
DO NOT use a timed oven that is already warm.
nn
DO NOT use the timed oven if the adjoining oven is
nn
already warm.
When the oven is on, do not leave the door open for
longer than necessary, otherwise the knobs may get very
hot.
Whole poultry must be thoroughly defrosted before being
placed in the oven. Check that meat and poultry are fully
cooked before serving.
•
•
•
•
•
•
10
Always leave a “finger’s width” between dishes on
the same shelf. This allows the heat to circulate freely
around them.
To reduce fat splashing when you add vegetables to hot
fat around a roast, dry them thoroughly or brush lightly
with cooking oil.
Where dishes may boil and spill over during cooking,
place them on a baking tray.
The ‘Cook & Clean’ oven liners (see ‘Cleaning Your
Cooker’) work better when fat splashes are avoided.
Cover meat when cooking with foil or use a roasting
bag.
Sufficient heat rises out of the oven while cooking to
warm plates in the grill compartment.
If you want to brown the base of a pastry dish, preheat
the baking tray for 15 minutes before placing the dish in
the centre of the tray.
5. Cooking Table
DocNo.031-0004 - Cooking table - electric & fan single cavity
The oven control settings and cooking times given in the table below are intended to be used
AS A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a
preferred result.
Food is cooked at lower temperature in a fan oven than in a conventional oven. When using
recipes, reduce the fan oven temperature by 10 °C and the cooking time by 5-10 minutes. The
temperature in the fan oven does not vary with height in the oven so you can use any shelf.
Top (T)
Centre (C)
Base (B)
Oven Shelf Positions
Conventional Oven
Fan Oven
Temperature °C
Temperature
(Shelf Position)
°C
160 (C)
150
200 (C)
190
160 (C)
150
200 (C)
190
160 (C)
150
200 (C)
190
160 (C)
150
20-25 minutes per 500g +20-25 minutes.
200 (C)
190
15-20 minutes per 500g +15-20 minutes.
160 (C)
150
20 minutes per 500g +20 minutes.
200 (C)
190
15 minutes per 500g +15 minutes.
160 (C)
150
25-30 minutes per 500g.
200 (C)
190
20 minutes per 500g.
140-150 (C)
130-140
220 (C)
210
Large tins 30-35 minutes; individual 10-20 minutes.
140 (C/B)
130
45-50 minutes per 500g of mixture.
Fruit 180 mm tin
150 (C/B)
140
2-2½ hours.
Fruit 230 mm tin
150 (C/B)
140
Up to 3½ hours.
Madeira 180 mm
160 (C/B)
150
80-90 minutes.
Small cakes
170 (C/B)
160
15-25 minutes.
Scones
200 (C/B)
190
10-15 minutes.
180 mm tin
170 (C/B)
160
20-30 minutes.
210 mm tin
170 (C/B)
160
30-40 minutes.
Shortcrust tarts
200 (C/B)
190
20-30 minutes on a preheated tray.
Fruit pies
180 (C/B)
170
35-45 minutes.
Tartlets
180 (C/B)
170
10-20 minutes according to size.
Puff pastry
210 (C/B)
200
20-40 minutes according to size.
Meringues
100 (C/B)
90
2-3 hours.
Food
Meat
ArtNo.050-0007
Oven shelf positions
T - Top; C - Centre; B - Base
Approximate Cooking Time
ArtNo.050-0001 Gas cooking table
Beef (no bone)
Lamb
Pork
Poultry
Chicken
Turkey
Duck
Casserole
Yorkshire Pudding
30-35 minutes per 500g +30-35 minutes. Thoroughly thaw frozen joints before
cooking. Meat may be roasted at
20-25 minutes per 500g +20-25 minutes.
220°C (210°C for fan oven) and the
30-35 minutes per 500g +30-35 minutes. cooking time adjusted accordingly.
25-30 minutes per 500g +25-30 minutes. For stuffed and rolled meats, add
approximately 10 minutes per 500g,
35-40 minutes per 500g +35-40 minutes. or cook at 200°C (190°C) for 20
25-30 minutes per 500g +25-30 minutes. minutes then 160°C (150°C) for the
remainder.
2-4 hours according to recipe.
For stuffed poultry, you could cook
at 200°C (190°C) for 20 minutes
then 160°C (150°C) for remainder.
Do not forget to include the weight
of the stuffing.
For fresh or frozen prepacked
poultry, follow instructions on the
pack. Thoroughly thaw frozen
poultry before cooking.
Cake
Very rich fruit - Christmas,
wedding, etc.
Using the conventional oven: when
two tier cooking leave at least one
runner space between shelves.
Position the baking tray with the
front edge along the front of the
oven shelf.
Victoria sandwich
Desserts
Baked egg custard
160 (C/B)
150
45-60 minutes.
Baked sponge pudding
180 (C/B)
170
40-45 minutes.
140-150 (C/B)
130-140
210 (C)
200
20-30 minutes.
Milk pudding
Bread
Fish
2 to 3 hours.
Fanned Grilling
Fillet
190 (C/B)
190 (C/B)
15-20 minutes.
Whole
190 (C/B)
190 (C/B)
15-20 minutes per 500g.
Steak
190 (C/B)
190 (C/B)
Steaks according to thickness.
11
Up to three tiers can be cooked in a
fan oven at the same time but make
sure to leave at least one runner
space between each shelf being
cooked on.
Using the conventional oven: for
even browning the maximum size of
baking tray recommended is 340 mm
x 340 mm. This ensures free heat
circulation.
If cooking a two tier load, the trays
should be interchanged
approximately halfway though the
cooking time.
6. Cleaning Your Cooker
Fig. 6.1
Essential Information
A
Isolate the electricity supply before carrying out any
thorough cleaning. Allow the cooker to cool.
C
NEVER use paint solvents, washing soda, caustic
nn
cleaners, biological powders, bleach, chlorine based
B
bleach cleaners, coarse abrasives or salt.
DO NOT mix different cleaning products – they may
nn
react together with hazardous results.
E
D
All parts of the cooker can be cleaned with hot soapy water
– but take care that no surplus water seeps into the
appliance.
ArtNo.311-0032 Burner layout FSD
A – Cap, B – Head, C – Notch, D – Base , E – Electrode
Fig. 6.2
Remember to switch on the electricity supply and reset the
clock before re-using the cooker.
A
Hotplate Burners
The burner heads and caps can be removed for cleaning.
B
DO NOT put the burner heads in a dishwasher.
nn
Make sure they are absolutely dry before replacing them.
C
The Single Ring Burners
When refitting the burner head, make sure that the notch
lines up with the electrode or hole in the base. Check that the
burner head is level and that the cap is fitted centrally on the
burner head (Fig. 6.1).
D
ArtNo.311-0033 Wok burner details FSD
The Wok Burner (Classic & Toledo models)
When reassembling the wok burner (Fig. 6.2), turn over the
large base ring and find the ‘D’ shaped area (Fig. 6.3). Turn
the head until the ‘D’ matches the one on the burner base.
Flip the burner over once again and place it on the burner
base.
E
A – Inner burner cap, B – Outer burner cap, C – Inner burner head,
D – Outer burner head, E – Wok burner base
To fit the small inner burner, find the larger electrode notch in
the burner rim. Line this up with the white ignition electrode
and place the inner burner on the large base ring (Fig.
6.4). Now fit the two burner caps, ensuring that they are
seated properly. Check the burner ports are not blocked. If a
blockage occurs, remove stubborn particles using a piece of
fuse wire.
Fig. 6.3
The Wok Cradle (Classic & Toledo models)
Recommended cleaning materials are hot soapy water, a
moistened soap pad, cream cleaner or a nylon scourer.
Fig. 6.4
B
The Griddle
Always clean the griddle after use. Allow it to cool completely
before removing. Immerse the griddle plate in hot soapy
water. Use a soft cloth or, for stubborn stains, a nylon washing
up brush.
Note: If the griddle is washed in a dishwasher then some
dishwasher residue may appear on the back. This is normal
and will not affect the performance of your griddle.
A
ArtNo.311-0016 Fitting the burner inner head
A – Electrode notch, B – Ignition electrode
12
Grill
Fig. 6.5
The grill pan and trivet should be washed in hot soapy water.
After grilling meats or any foods that soil, leave to soak for a
few minutes immediately after use. Stubborn particles may
be removed from the trivet using a nylon brush. Alternatively,
the grill pan can be washed in a dishwasher.
Before you remove any of the grill parts for cleaning,
nn
make sure that they are cool, or use oven gloves.
DO NOT use any abrasive substances.
nn
ArtNo.320-0002a Proplus oven door side screws
Control Panel, Doors and Glass Lid
Avoid using any abrasive cleaners including cream cleaners.
For best results, use a liquid detergent. The control panel,
knobs and doors should only be cleaned with a soft cloth
wrung out in clean hot soapy water – but take care that no
surplus water seeps into the appliance. After cleaning, polish
with a dry cloth.
Fig. 6.6
Do NOT use harsh abrasive cleaners or sharp metal
nn
scrapers to clean the glass lid since they can scratch
the surface, which may result in shattering of the
glass.
Glass Fronted Door Panels
The oven door front panels can be taken off so that the glass
panels can be cleaned. Move the cooker forward to gain
access to the sides (see the ‘Moving the Cooker’ section under
‘Installation’).
Fig. 6.7
Open the oven door slightly and remove the front panel
fixing screws from the door sides, two each side (Fig. 6.5).
Carefully lift off the outer door panel. The inside face of the
glass panels can now be cleaned – take care not to disturb or
wet the door insulation.
Note: If the door is triple glazed then the inner two panels are
fixed together and should not be separated.
After cleaning, carefully refit the outer door panel and replace
the side fixing screws.
DO NOT use harsh abrasive cleaners or sharp metal
nn
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
Ovens
‘Cook & Clean’ Panels
DO NOT use steel wool, oven cleaning pads, or any
nn
other materials that will scratch the surface.
The main oven has panels which have been coated with a
special enamel that partly cleans itself. This does not stop
all marks on the lining, but helps to reduce the amount of
manual cleaning needed.
The ‘Cook & Clean’ panels work better above 200 °C. If you do
most of your cooking below this temperature, occasionally
remove the panels and wipe with a lint free cloth and hot
soapy water. The panels should then be dried and replaced
and the oven heated at 200 °C for about one hour. This will
ensure the ‘Cook & Clean’ panels are working effectively.
13
Removing the Main Oven Linings
The Tall Oven
Some of the lining panels can be removed for cleaning.
To clean the oven sides, slide out the shelves, unhook the
supports from the oven sides, and lift out (Fig. 6.7).
If you wish to clean the enamel interior of the oven, you
will need to remove the shelves before removing the ‘Cook
& Clean’ panels. You do not have to remove the support
brackets to remove the panels. Lift each panel upward and
slide forward off the support brackets (Fig. 6.6).
Cleaning Table
Cleaners listed (Table 6.1) are available from supermarkets or
electrical retailers as stated.
Once the panels have been removed, the oven enamel
interior can be cleaned.
For enamelled surfaces use a cleaner that is approved for use
on vitreous enamel.
Refit in the reverse order.
Regular cleaning is recommended. For easier cleaning, wipe
up any spillages immediately.
Hotplate
Part
Finish
Recommended Cleaning Method
Hob top (including burner heads and Enamel, stainless steel,
caps)
aluminium
Hot soapy water, soft cloth. Any stubborn stains remove gently
with a nylon scourer.
Ceramic/Induction hob
Toughened glass
Hot soapy water; cream cleaner/scourer if necessary.
Griddle plate (some models only)
Non-stick surface
Allow to cool. Wash in hot soapy water. Do not use abrasive
cleaners/scourers. Dishwasher.
Warming zone (some models only) Toughened glass
Hot soapy water, cream cleaner/scourer if necessary.
Outside of Cooker
Part
Finish
Recommended Cleaning Method
Enamel or paint
Hot soapy water, soft cloth.
Any stubborn stains, remove gently with a liquid detergent.
Stainless steel
E-cloth (electrical retailers) or microfibre all-purpose cloth
(supermarket).
Sides and plinth
Painted surface
Hot soapy water, soft cloth.
Splashback/rear grille
Enamel or stainless steel
Hot soapy water, soft cloth. Cream cleaner, with care, if necessary.
Control panel
Paint, enamel or stainless steel
Warm soapy water. Do not use abrasive cleaners on lettering.
Control knobs/handles & trims
Plastic/chrome, copper or
lacquered brass
Warm soapy water, soft cloth.
Brass
Brass polish.
Toughened glass
Hot soapy water, cream cleaner/scourer if necessary.
Finish
Recommended Cleaning Method
Door, door surround and storage
drawer exterior
Oven door glass/glass lid
Oven and Grill
Part
Sides, floor & roof of oven NOT
COOK & CLEAN OVEN PANELS (see Enamel
below)
Any proprietary oven cleaner that is suitable for enamel.
CAUTION: CORROSIVE/CAUSTIC OVEN CLEANERS: FOLLOW
MANUFACTURER’S INSTRUCTIONS.
Do not allow contact with the oven elements.
Cook & Clean oven panels (some
models only)
Special enamel that partly
cleans itself
This surface cleans itself at 200 °C and above, or the panels can
be removed and washed with hot soapy water and a nylon brush
(see ‘The Ovens’ in ‘Cleaning your Cooker’).
Oven shelves, Handyrack, grill
trivet, Handygrill rack (some
models only)
Chrome
An oven interior cleaner that is suitable for chrome. Soap filled
pad. Dishwasher.
Grill pan/meat tin (some models
only)
Enamel
Hot soapy water. Soap filled pad. Dishwasher.
Table 6.1
14
7. Troubleshooting
Hotplate ignition or hotplate burners faulty
Is the power on? Is the clock illuminated?
If not, there maybe something wrong with the power
supply.
Are the sparker (ignition electrode) or burner slots
blocked by debris?
Are the burner trim and caps correctly located? See the
section on ‘Cleaning’.
Hotplate burners will not light
Make sure that the burner parts have been replaced
correctly after wiping or removing for cleaning.
Check that there is not a problem with your gas
supply. You can do this by making sure that other gas
appliances you may have are working.
If there is an installation problem and I don’t get my
original installer to come back to fix it who pays?
You do. Service organizations will charge for their call
outs if they are correcting work carried out by your
original installer. It is in your interest to track down your
original installer.
Power failure
In the event of a failure in the electrical supply,
remember to reset the clock to make sure that the
timed oven continues to operate.
Food is cooking too slowly, too quickly, or burning
Cooking times may differ from your previous oven.
Do the burners spark when you push the button?
Check that you are using the recommended
temperatures and shelf positions – see the oven
cooking guide. The oven control settings and cooking
times are intended to be used only as a guide.
If not, verify that the power is on by checking that the
clock is illuminated.
Individual tastes may require the temperature to be
altered either way, to get the results you want.
Steam is coming from the oven
When cooking foods with high water content (e.g. oven
fries) there may be some steam visible at the rear grille.
Take care when opening the oven door, as there may
be a momentary puff of steam when the oven door
is opened. Stand well back and allow any steam to
disperse.
What cleaning materials are recommended for the
cooker?
See the ‘Cleaning’ section for recommended cleaning
materials.
Never use caustic or abrasive cleaners as these will
nn
damage the surface.
An oven fan is noisy
The note of the oven fan may change as the oven heats
up – this is perfectly normal.
The knobs get hot when I use the oven or the grill. Can I
avoid this?
Yes, this is caused by heat rising from the oven or the
grill, and heating them up. Do not leave the oven door
open.
Make sure that the grill pan is pushed right back to the
‘back stop’ when grilling.
Always grill with the grill compartment door open.
The oven is not cooking evenly
Do not use a baking tray with dimensions larger than
those specified in the section on ‘General Oven Tips’.
If you are cooking a large item, be prepared to turn it
round during cooking.
If two shelves are used, check that space has been left
for the heat to circulate. When a baking tray is put into
the oven, make sure that it is placed centrally on the
shelf.
Check that the door seal is not damaged and that the
door catch is adjusted so that the door is held firmly
against the seal.
A dish of water when placed on the shelf should be the
same depth all over. (For example, if it is deeper at the
back, then the back of the cooker should be raised up or
the front lowered.) If the cooker is not level, arrange for
your supplier to level it for you.
Oven not coming on
Is the power on? Is the clock illuminated? If not, there
may be something wrong with the power supply.
Is the cooker supply on at the isolator switch?
Has the time of day been set?
Is the key symbol [] showing in the display to signify
that the oven is locked? See the ‘Clock’ section of the
instructions for more information on the key lock
feature.
The timed oven is not coming on when automatic cooking
Has the oven knob been left in the OFF position by
mistake?
Is the oven locked (see above)?
Fig. 7.1
ArtNo.324-0005 Oven light bulb
Oven temperature getting hotter as the cooker gets older
If turning the temperature down using the oven control
knob has not worked, or has only worked for a short
time, then you may need a new thermostat. This should
be fitted by a qualified service person.
Fig. 7.2
An oven light is not working
The bulb has probably burnt out. You can buy a
replacement bulb (which is not covered under the
warranty) from a good electrical shop. Ask for a 15 W –
230 V lamp, FOR OVENS. It must be a special bulb, heat
resistant to 300 °C (Fig. 7.1).
Turn off the power at the circuit breaker.
Before removing the existing bulb, turn off the power
supply and make sure that the oven is cool. Open the
oven door and remove the oven shelves.
Unscrew the bulb cover by turning counter-clockwise. It
may be very stiff (Fig. 7.2).
Fig. 7.3
Taking care to protect your fingers with a glove in case
the bulb should shatter, unscrew the old bulb.
Screw in the new bulb; screw back the bulb cover. Turn
on the circuit breaker and check that the bulb now
lights.
The oven door is misaligned
The bottom hinge of either oven door can be adjusted
to alter the angle of the door (Fig. 7.3). Loosen the
bottom hinge fixing screws and use the notch and a flat
bladed screwdriver to move the position of the hinge to
set the hinge position (Fig. 7.4).
Effect of hinge adjustment – exaggerated for clarity
Centre line of hinge pin
Retighten the hinge screws.
ArtNo.320-0007 Oven door hinge adjustment 2
Oven door omitted for clarity
Fig. 7.4
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
8. Installation
Dear Installer
In the UK the cooker must be installed in
accordance with:
Before you start your installation, please complete the details
below, so that, if your customer has a problem relating to
your installation, they will be able to contact you easily.
•
•
•
Installer’s Name
Installer’s Company
•
•
ArtNo.050-0011 - Installer information table
All relevant British Standards / Codes of Practice, in
particular BS 5440 Part 2.
For Natural Gas – BS 6172 and BS 6891.
For LP Gas – BS 5482-1 (when the installation is
in a permanent dwelling), BS 5482-2 (when the
installation is in a caravan or other non-permanent
dwelling), or BS 5482-3 (when the installation is in a
boat).
The Gas Safety (Installation and Use) regulations.
The relevant Building / IEE regulations.
Installer’s Telephone Number
In the Republic of Ireland the cooker must be
installed in accordance with:
Appliance Serial Number
The installation must be carried out by a competent person
and installed in accordance with the current edition of IS 813
“Domestic Gas Installations”, the current Building Regulations
and reference should be made to the current ETCI rules for
electrical installation.
Provision of Ventilation
This appliance is not connected to a combustion products
evacuation device. Particular attention shall be given to the
relevant requirements regarding ventilation.
Safety Requirements and Regulations
This cooker must be installed in accordance with
nn
the relevant instructions in this booklet, with the
All rooms require a window that can be opened, or
equivalent, while some rooms require a permanent vent in
addition to the window.
relevant national and local regulations, and with
the local gas and electricity supply companies’
requirements.
In the UK:
This cooker is a Class 2 Subclass 1 appliance.
nn
Before installation, make sure that the cooker is
nn
suitable for your gas type and supply voltage. See
The room containing the cooker should have an air supply
in accordance with BS 5440 Part 2. All rooms require an
openable window or equivalent, while some rooms require
a permanent vent in addition to the openable window. The
cooker should not be installed in a bedsitting room with
volume less than 20 m³. If it is installed in a room of volume
less than 5 m³ an air vent of effective area 100 cm² is required;
if it is installed in a room of volume between 5 m³ and 10 m³,
an air vent of effective area 50 cm² is required; while if the
volume exceeds 11 m³, no air vent is required.
the data badge.
The appliance must be installed in accordance with
nn
the regulations in force and only in a well-ventilated
space.
Read the instructions before installing or using this
nn
appliance.
If there are other fuel burning appliances in the same room,
BS 5440 Part 2 should be consulted to determine the requisite
air vent requirements.
In your own interest and that of safety, it is law
nn
that all gas appliances be installed by competent
persons. Failure to install the appliance correctly
could invalidate any warranty or liability claims and
lead to prosecution.
In the Republic of Ireland:
Reference should be made to the current edition of IS 813,
which makes clear the conditions that must be met to
demonstrate that sufficient ventilation is available.
This appliance can be converted for use on another
gas.
nn
17
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Checking the Parts:
Location of Cooker
The cooker may be installed in a kitchen/kitchen diner but
NOT in a room containing a bath or shower.
3 pan supports (Classic shown)
This appliance is designed for domestic cooking only. Use
for any other purpose could invalidate any warranty or
liability claim.
Plinth (Classic shown)
ArtNo.350-0005 - 90 plinth
Note: An appliance for use on LPG must not be installed
in a room or internal space below ground level, e.g. in a
basement.
Griddle
Grill pan & trivet
Conversion
This appliance is supplied set for G20 20 mbar Cat II2H3+.
ArtNo.330-0002 - Grill pan w handle
A conversion kit for another gas is available for the cooker.
If the appliance is to be converted to another gas we
recommend that this is carried out before installation.
After converting the appliance, please attach the Gas
Conversion sticker over the appropriate area of the data
badge – this will identify the gas type for which the appliance
is now set.
You will need the following equipment to complete the
cooker installation satisfactorily:
•
Stability bracket: If the cooker is to be supplied with
gas through a flexible hose, a stability bracket or chain
MUST be fitted.
These are not supplied with the cooker but are
available at most builders’ merchants
•
Gas pressure tester/manometer
•
Flexible gas hose: Must be in accordance with the
relevant standards
•
Multimeter: For electrical checks
You will also need the following tools:
1. Electric drill
2. Masonry drill bit (only required if fitting the cooker on a
stone or concrete floor)
3. Wall plugs (only required if fitting the cooker on a stone
or concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. Spirit level
8. Pencil
9. Adjustable spanner
10. Screws for fitting stability bracket
11. 4 mm & 3 mm Allen keys
12. 13 mm spanner or socket wrench
2 flat shelves
ArtNo.326-0002 - Energy saving shelf
Roasting tin
Handyrack
ArtNo.324-0003 Handyrack
Tall oven shelves and shelf
supports
ArtNo.324-0004 Roasting tin
ArtNo.000-0010 Tall oven shelves
18
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Positioning the Cooker
Fig. 8.1 and Fig. 8.2 show the minimum recommended
distance from the cooker to nearby surfaces.
75 mm
min
The cooker should not be placed on a base.
650 mm
min
75 mm
min
Fig. 8.1
The hotplate surround should be level with, or above, any
adjacent work surface.
A gap of 75 mm should be left between each side of the
cooker ABOVE the hotplate level and any adjacent vertical
surface.
905 mm min
930 mm max
For non-combustible surfaces (such as unpainted metal or
ceramic tiles), this can be reduced to 25 mm.
A minimum space of 650 mm is required between the top of
the hotplate and a horizontal combustible surface.
900 mm min*
*Any cookerhood should be installed in accordance with the
hood manufacturer’s instructions.
**Any splashback must be fitted in accordance with the
manufacturers instructions. Allowance should be made for the
additional height of the flue trim, which is fitted to the cooker
hob.
410 mm min
5 mm
Fig. 8.2
ArtNo.090-0012 Min positions above cooker
**
5 mm
Surfaces of furniture and walls at the sides and rear of the
appliance should be heat, splash and steam resistant. Certain
types of vinyl or laminate kitchen furniture are particularly
prone to heat damage and discolouration.
We cannot accept responsibility for damage caused by
normal use of the cooker to any material that de-laminates
or discolours at temperatures less than 65 °C above room
temperature.
Wall finish should not
overhang the side trim
We recommend a gap of 910 mm between units to allow
for moving the cooker. Do not box the cooker in – it must
be possible to move the cooker in and out for cleaning and
servicing.
Allow sufficient clearance
for the lid to open fully
Fig. 8.3
Make sure that the wall above and behind the cooker is flat
and free of protrusions. To avoid problems opening the lid
fully, the side trim should fit flush to the wall and no part of
the wall should overhang the cooker (Fig. 8.3).
Fig. 8.4
If the cooker is near a corner of the kitchen a clearance of
130 mm is required to allow the oven doors to open (Fig. 8.4).
The actual opening of the doors is slightly less but this allows
for some protection of your hand as you open the door.
130 mm
19
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Moving the Cooker
Fig. 8.5
On no account try and move the cooker while it is
nn
plugged into the electricity supply.
The cooker is very heavy, so take great care.
nn
We recommend that two people manoeuvre the cooker.
Make sure that the floor covering is firmly fixed, or removed,
to prevent it being disturbed when moving the cooker
around.
To help you, there are two levelling rollers at the back, and
two screw-down levelling feet at the front.
Fig. 8.6
Remove the polystyrene base pack. From the front, tilt
the cooker backwards and remove the front half of the
polystyrene base (Fig. 8.5). Repeat from the back and remove
the rear half of the polystyrene base.
Lowering the Two Rear Rollers
To adjust the height of the rear of the cooker, first fit a
13 mm spanner or socket wrench onto the hexagonal
adjusting nut (Fig. 8.6). Rotate the nut – clockwise to raise –
counter-clockwise to lower.
Fig. 8.7
Make 10 complete (360°) turns clockwise.
Make sure you lower BOTH REAR ROLLERS.
Completing the Move
Unfold the rear edge of the cardboard base tray. Open the
grill door and right-hand oven door so that you can get a
good grip on the bottom of the fascia panel as you move the
oven (Fig. 8.7).
ArtNo.010-0004 Moving the cooker
Carefully push the cooker backwards off the base tray.
Remove the base tray.
Fig. 8.8
Position the cooker close to its final position, leaving just
enough space to get behind it.
Stability chain
Do not use the door handles or control knobs to
nn
manoeuvre the cooker.
Fitting the Stability Bracket or Chain
Unless otherwise stated, a cooker using a flexible gas
connector must be secured with a suitable stability device.
Suitable stability devices are shown in Fig. 8.8, Fig. 8.9 and
Fig. 8.10.
Fig. 8.9
If you are using a stability chain (Fig. 8.8) then the chain
should be kept as short as is practicable and fixed firmly to
the rear of the cooker.
Stability bracket
If you are using a stability bracket (Fig. 8.9 and Fig. 8.10),
then adjust the bracket to give the smallest practicable
clearance between the bracket and the engagement slot in
the rear of the cooker.
Cooker
3 mm min
Fit the bracket so that it engages as far as possible over the
chassis of the cooker.
ArtNo.070-0014 - Stability bracket - WallFloor
fitting
Typical floor mounting
20
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Repositioning the Cooker Following
Connection
Outer stability
bracket
If you need to move the cooker once it has been connected
then you need to unplug it and, having gripped under the
fascia panel and lifted the front of the cooker slightly
(Fig. 8.7), you need to check behind the cooker to make sure
that the gas hose is not caught.
Fig. 8.10
Cooker
3 mm min
As you progress, make sure that both the electricity cable and
gas hose always have sufficient slack to allow the cooker to
move.
Wall
Floor
Typical wall mounting
With a stability chain fitted, release it as you ease the cooker out.
Do not forget to refit it when you replace the cooker.
Fig. 8.11
When you replace the cooker, again check behind to make
sure that the electricity cable and gas hose are not caught or
trapped.
Conversion to Another Gas
ArtNo.215-0026 - Handle gaskets fixed
If the appliance is to be converted to another gas do the
conversion at this point. See the conversion section of these
instructions.
Fig. 8.12
Levelling
You are recommended to use a spirit level on a shelf in one of
the ovens to check for level.
ArtNo.210-0006 - Classic fitting the handles 2
Place the cooker in its intended position taking care not to
twist it within the gap between the kitchen units as damage
may occur to the cooker or the units.
The front feet and rear rollers can be adjusted to level the
cooker.
Fig. 8.13
To adjust the height of the rear of the cooker use a 13 mm
spanner or socket wrench to turn the adjusting nuts at the
front bottom corners of the cooker.
To set the front, turn the feet bases to raise or lower.
Fitting the Handles and Handrail (Classic
Art No 215-0028 - Handrail fascia fixings
only)
Remove the 4 mm Allen screws from the doors (Fig. 8.11). Fit
the door handles and secure using the 4 mm screws
(Fig. 8.12).
The handles should be above the fixings.
nn
Remove the 4 mm Allen screws from the top corners of the
fascia (Fig. 8.13). Fit the handrail in position and secure using
the 4 mm screws.
21
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Gas Connection
Fig. 8.14
Gas inlet
block
This must be in accordance with the relevant standards.
400
300
The flexible hose (not supplied with the cooker) must be
in accordance with the relevant standards. Hoses may be
purchased at most builders’ merchants.
A
The gas supply needs to terminate with a down-facing
bayonet.
The connector is located just below the hotplate level at the
rear of the cooker. If in doubt contact your supplier.
The rear cover boxes limit the position of the supply point.
Because the height of the cooker can be adjusted and
each connection is different, it is difficult to give precise
dimensions.
800
Although a 900 mm hose can be used, a 1250 mm hose
will allow slightly more flexibility in the positioning of the
bayonet and make moving the cooker easier.
600
ArtNo.090-0034 - RangeMaster 90 Hose connectors
The hose should be fitted so that both inlet and outlet
connections are vertical so that the hose hangs downwards in
a ‘U’ shape.
Ideally the hose supply connection should be within the
shaded area ‘A’ (Fig. 8.14).
All dimensions in millimetres
For Natural Gas, the flexible hose must be in accordance with
BS 669. For LP Gas, it should be capable of 50 mbar pressure,
70 °C temperature rise, and carry a red stripe, band or label. If
in doubt contact, your supplier.
Screw connect the threaded end of the hose into the gas
inlet.
After completing the gas connection, make sure that the
cooker is gas sound with a pressure test.
Pressure Testing
The gas pressure can be measured at one of the hotplate
burner injectors (not a wok burner).
Lift off a burner head. Fit the pressure gauge to the injector.
Turn on and light one of the other hotplate burners.
Turn on the control knob for the burner with the pressure
gauge fitted to let gas through.
See the data badge for test pressures.
Turn off the burners. Make sure that you reassemble the
burner top in the correct way on the burner body.
22
INSTALLATION
Check the appliance is electrically safe and gas sound when you have finished.
Electrical Connection
Fig. 8.15
The cooker must be installed by a qualified electrician, in
accordance with all relevant British Standards/Codes of
Practice (in particular BS 7671), or with the relevant national
and local regulations.
L
N
Current Operated Earth Leakage Breakers
The combined use of your cooker and other domestic
appliances may cause nuisance tripping, so we
recommend that the cooker is protected on an individual
RCD (Residual Current Device) or RCBO (Residual Current
Breaker with Overload).
10 mm² max
ArtNo.130-0010 Electrical connections single-phase6 mm² max
230 V ac 50 Hz
IF IN DOUBT, PLEASE CONSULT A SUITABLY QUALIFIED
ELECTRICIAN.
Note: The cooker must be connected to the correct electrical
supply as stated on the voltage label on the cooker, through
a suitable cooker control unit incorporating a double-pole
switch, having a contact separation of at least 3 mm in all
poles.
Fig. 8.16
L1
N
L3
L2
The cooker MUST NOT be connected to an ordinary
nn
domestic power point.
6 mm² max
6 mm² max
Access to the mains terminal is gained by removing the
electrical terminal cover box on the back panel. Connect
the mains cable to the correct terminals for your electrical
supply type (Fig. 8.15 and Fig. 8.16). Check that the links are
correctly fitted and that the terminal screws are tight. Secure
the mains cable using the cable clamp.
3N ac
230/400 V 50 Hz
10 mm² max
Final Checks
Hotplate Check
Fig. 8.17
Check each burner in turn (refer to the ‘Hotplate Burners’
section at the front of the instructions).
Grill Check
Turn on the grill control and check that the grill heats up.
Oven Check
Set the clock as described earlier in the instructions, and then
turn on the ovens. Check that the oven fans start to turn and
that the ovens start to heat up.
Note: The oven light bulb is not included in the guarantee.
ArtNo.350-0012 - Securing the plinth
Turn off the oven.
Fitting the Plinth
Loosen the 3 screws along the front bottom edge of the
cooker. Hook the central keyhole over the central screw. Twist
and fit each end keyhole over their respective screws. Tighten
the fixing screws (Fig. 8.17).
Customer Care
Installer: Please complete your details in this guide, inform
the user how to operate the cooker and hand over the
instructions.
Thank you.
23
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
9. Conversion to LP Gas
Check the ‘Technical Data’ section at the back of the book
that the hob is convertible to the gas you want to use.
A suitably competent person must perform the conversion.
After conversion the installation must comply with the
relevant regulations and also the local electricity supply
company requirements. Read the instructions before
converting this appliance.
Fig. 9.1
B
Failure to convert the appliance correctly could
nn
invalidate any warranty or liability claims and lead
A
to prosecution.
When servicing or replacing gas-carrying
components disconnect from the gas supply before
starting operation. Check the appliance is gas sound
after completion.
C
ArtNo.311-0010 Injectors
•
nn
A – Jet, B – Internal injector, C – External injector
Fig. 9.2
DO NOT use reconditioned or unauthorised gas
nn
controls.
Disconnect from the electricity and gas supply
nn
before servicing.
Before electrical reconnection, check that the
nn
appliance is electrically safe.
Art No 215-0028 - Handrail fascia fixings
Injectors
Remove the burner caps and heads. Remove the old jets
(Fig. 9.1). Fit the new jets (see the ‘Technical Data’ section at
the back of this book for the correct jets). Reassemble in the
reverse order.
Fig. 9.3
ArtNo.0102-0011 - Screwing
the control valve bypass screw
Tap Adjustment
Classic – Removing the Control Panel
Remove the handrail. Now remove the 2 cross-headed screws
hidden behind the handrail end brackets (Fig. 9.2).
Pull off all the control knobs and remove the fixing screws
underneath the control panel.
Lift the control panel and pull forwards, taking care not to
damage or strain the wiring.
Rangemaster & Toledo – Removing the Control
Panel
Pull off all the control knobs and remove the fixing screws
underneath the control panel.
Slide the control panel to the right and then pull forwards,
taking care not to damage or strain the wiring.
Bypass Screw Adjustment
Turn te bypass screw on each control clockwise to the stop
(Fig. 9.3).
Refit the control panel.
24
WARNING – SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSON
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
Stick on Label
Stick the LP gas label over the natural gas part of the
appliance data label.
Pressure Testing
Connect the appliance to the gas supply.
Check the appliance is gas sound.
The gas pressure can be measured at one of the hotplate
injectors (not a wok burner).
Lift off a burner head. Fit the pressure gauge to the jet. Turn
on and light one of the other burners. Turn on and press in
the control knob for the burner with the pressure gauge
fitted.
The pressure should be 29 mbar for Butane and 37 mbar for
Propane. After checking the pressure, turn off the taps and
replace the burner head.
Reassemble burner top, making sure it is reassembled in the
correct way on the burner body.
Check operation of all the burners.
25
10. Circuit Diagram
I
b
w
b
w w
r
I
1
B1
w
b
bk
v
r
br
br
A1
r
w
or
2
1
B2
P1
G
br
b
br
y
y y
b
w
br
1
br
bk
w
r
v
v
br
y
2
D1
P095199
b
B3
B4
bk
b
b
2
K
or
A3
br
y
b
br
br
A2
H
bk
P2
I
C
w
2
b
J
y
b
b
b
b
F
e
c
b
1
2
P1
P095199
y
D3
D4
a
v
P2 y
gr
f
d
1
gr
D2
b
b
b
b
b
b
J
br
br
br
b
b
b
b
E
Key
The connections shown in the circuit diagram are for single-phase. The ratings are for 230 V 50 Hz.
Code Description
Code Description
Code Colour
A1
Grill control
F
Ignition spark generator
b
Blue
A2
Grill element left-hand side
G
Ignition switch
br
Brown
A3
Grill element right-hand side
H
Oven light switch
bk
Black
B1
Left-hand oven thermostat
I
Neon
or
Orange
B2
Left-hand oven control
J
Thermal cut-out
r
Red
B3
Left-hand oven element
K
Oven light
v
Violet
B4
Left-hand oven fan
w
White
C
Clock
y
Yellow
D1
Right-hand oven thermostat
g/y
Green/yellow
D2
Right-hand oven control
gr
Grey
D3
Right-hand oven element
D4
Right-hand oven fan
26
11. Technical Data
Classic
THE COOKER IS CATEGORY: CatII2H3+.
It is supplied set for group H natural gas. A conversion kit from NG to LP is available for the cooker.
INSTALLER: Please leave these instructions with the user.
DATA BADGE LOCATION: Cooker back, serial number repeater badge below oven door opening.
COUNTRY OF DESTINATION: GB, IE, FR, NL, DE, SE, IT, AT, CH, LU, BE.
Connections
Gas (Rp ½ at rear right-hand side)
Electric
Natural Gas
20 mbar
Butane
29 mbar
Propane
37 mbar
230/400 V 50 Hz
See the appliance badge for test pressures.
Dimensions
Model
Classic Lidded 90 Dual Fuel
Overall height
maximum 930 mm
minimum 905 mm
Overall width
905 mm
Overall depth
608 mm excluding handles, 670 mm including handles
Minimum height above the hotplate
650 mm
Hotplate Ratings
Hotplate
Bypass
Screw*
Natural Gas 20 mb
L.P. Gas
Injector
Injector
Wok burner
57
3.5 kW
internal 78
external 126
3.5 kW (246 g/h
internal 53
external 82
Rapide/ Large Burner
40
3 kW
134
3.0 kW (210 g/h)
87
Semi Rapide / Medium Burner
32
1.7 kW
109
1.7 kW (119 g/h)
68
Auxiliary / Small Burner
28
1 kW
75
1.0 kW (70 g/h)
51
* The valves in this cooker are fitted with adjustable bypass screws. The cooker is supplied with the bypass screws set for Natural Gas. For LPG conversion the bypass
screws must be screwed all the way down.
Hotplate energy saving tips
Oven energy saving tips
Use cookware with a flat base.
Cook meals together, if possible.
Use the correct size cookware.
Keep the pre-heating time short.
Use cookware with a lid.
Do not lengthen cooking time.
Minimise the amount of liquid or fat.
Do not open the oven door during the cooking period.
When liquid starts boiling, reduce the setting.
Do not forget to turn the appliance off at the end of cooking.
Consumption is based on G30.
27
Rangemaster
THE COOKER IS CATEGORY: CatII2H3+.
It is supplied set for group H natural gas. A conversion kit from NG to LP is available for the cooker.
INSTALLER: Please leave these instructions with the user.
DATA BADGE LOCATION: Cooker back, serial number repeater badge below oven door opening.
COUNTRY OF DESTINATION: GB, IE, FR, NL, DE, SE, IT, AT, CH, LU, BE.
Connections
Gas (Rp ½ at rear right-hand side)
Electric
Natural Gas
20 mbar
Butane
29 mbar
Propane
37 mbar
230/400 V 50 Hz
See the appliance badge for test pressures.
Dimensions
Model
Rangemaster 90 Dual Fuel
Overall height
maximum 930 mm
minimum 905 mm
Overall width
905 mm
Overall depth
600 mm excluding handles, 650 mm including handles
Minimum height above the hotplate
650 mm
Hotplate Ratings
Hotplate
Bypass
Screw*
Natural Gas 20 mb
L.P. Gas
Injector
Injector
Wok burner
57
3.5 kW
internal 78
external 126
3.5 kW (246 g/h
internal 53
external 82
Rapide/ Large Burner
40
3 kW
134
3.0 kW (210 g/h)
87
Semi Rapide / Medium Burner
32
1.7 kW
109
1.7 kW (119 g/h)
68
Auxiliary / Small Burner
28
1 kW
75
1.0 kW (70 g/h)
51
* The valves in this cooker are fitted with adjustable bypass screws. The cooker is supplied with the bypass screws set for Natural Gas. For LPG conversion the bypass
screws must be screwed all the way down.
Hotplate energy saving tips
Oven energy saving tips
Use cookware with a flat base.
Cook meals together, if possible.
Use the correct size cookware.
Keep the pre-heating time short.
Use cookware with a lid.
Do not lengthen cooking time.
Minimise the amount of liquid or fat.
Do not open the oven door during the cooking period.
When liquid starts boiling, reduce the setting.
Do not forget to turn the appliance off at the end of cooking.
Consumption is based on G30.
28
Toledo
THE COOKER IS CATEGORY: CatII2H3+.
It is supplied set for group H natural gas. A conversion kit from NG to LP is available for the cooker.
INSTALLER: Please leave these instructions with the user.
DATA BADGE LOCATION: Cooker back, serial number repeater badge below oven door opening.
COUNTRY OF DESTINATION: GB, IE, FR, NL, DE, SE, IT, AT, CH, LU, BE.
Connections
Gas (Rp ½ at rear right-hand side)
Electric
Natural Gas
20 mbar
Butane
29 mbar
Propane
37 mbar
230/400 V 50 Hz
See the appliance badge for test pressures.
Dimensions
Model
Toledo Lidded 90 Dual Fuel
Overall height
maximum 930 mm
minimum 905 mm
Overall width
905 mm
Overall depth
600 mm excluding handles, 650 mm including handles
Minimum height above the hotplate
650 mm
Hotplate Ratings
Hotplate
Bypass
Screw*
Natural Gas 20 mb
L.P. Gas
Injector
Injector
Wok burner
57
3.5 kW
internal 78
external 126
3.5 kW (246 g/h
internal 53
external 82
Rapide/ Large Burner
40
3 kW
134
3.0 kW (210 g/h)
87
Semi Rapide / Medium Burner
32
1.7 kW
109
1.7 kW (119 g/h)
68
Auxiliary / Small Burner
28
1 kW
75
1.0 kW (70 g/h)
51
* The valves in this cooker are fitted with adjustable bypass screws. The cooker is supplied with the bypass screws set for Natural Gas. For LPG conversion the bypass
screws must be screwed all the way down.
Hotplate energy saving tips
Oven energy saving tips
Use cookware with a flat base.
Cook meals together, if possible.
Use the correct size cookware.
Keep the pre-heating time short.
Use cookware with a lid.
Do not lengthen cooking time.
Minimise the amount of liquid or fat.
Do not open the oven door during the cooking period.
When liquid starts boiling, reduce the setting.
Do not forget to turn the appliance off at the end of cooking.
Consumption is based on G30.
29
Hotplate Efficiency Toledo & Classic
Brand
Rangemaster
Toledo Lidded
Model Identification
Classic Lidded
Size
90
Type
Dual Fuel
Type of Hob
GAS
Number of gas burners
5
Auxiliary / Small Burner (EE gas burner)
-
Semi Rapide / Medium Burner (EE gas burner)
58%
Semi Rapide / Medium Burner (EE gas burner)
58%
Rapide / Large Burner (EE gas burner)
56%
Rapide / Large Burner (EE gas burner)
-
Wok (EE gas burner)
53%
Wok (EE gas burner)
-
Hotplate EE gas hob (*)
56%
Information marked thus (*) is not required with mixed fuel hobs
30
Hotplate Efficiency Rangemaster
Brand
Rangemaster
Model Identification
Rangemaster
Lidded
Size
90
Type
Dual Fuel
Type of Hob
GAS
Number of gas burners
5
Auxiliary / Small Burner (EE gas burner)
-
Semi Rapide / Medium Burner (EE gas burner)
58%
Semi Rapide / Medium Burner (EE gas burner)
58%
Rapide / Large Burner (EE gas burner)
56%
Rapide / Large Burner (EE gas burner)
56%
Wok (EE gas burner)
-
Wok (EE gas burner)
-
Hotplate EE gas hob (*)
57%
Information marked thus (*) is not required with mixed fuel hobs
31
Oven Data: Classic
Brand
Rangemaster
Model identification
Classic Lidded
Type of oven
Electric
Mass
kg
112
Number of cavities
2
Left-hand Efficiency
Fuel type
Electric
Cavity type
Fanned
Power - conventional
-
Power - forced air convection
2.5
Volume
Litres
67
Energy consumption (electricity) - conventional
kWh / cycle
-
Energy consumption (electricity) - forced air convection
kWh / cycle
0.8
Energy efficiency index - conventional
-
Energy efficiency index - forced air convection
96.2
Energy class
A
Right-hand Efficiency
Fuel type
Electric
Cavity type *Drop Down Door
Fanned
Power - conventional
-
Power - forced air convection
2.5
Volume
Litres
67
Energy consumption (electricity) - conventional
kWh / cycle
-
Energy consumption (electricity) - forced air convection
kWh / cycle
0.8
Energy efficiency index - conventional
-
Energy efficiency index - forced air convection
96.2
Energy class
A
Additional Information
The oven complies with EN 60350-1
Maximum output @ 230V 50Hz
Conventional
2.2 kW
Multifunction
-
Multifunction (with Rapid Response)
-
Forced Air Convection
2.5 kW
Grill
2.3 kW
Slow Oven
-
Bread Proving Drawer
-
Maximum total electrical load at 230 V (approximate total including hob, oven lights, oven fan, etc.):
32
7.4 kW
Oven Data: Toledo and Rangemaster
Brand
Rangemaster
Rangemaster Lidded
Model identification
Toledo Lidded
Type of oven
Electric
Mass
kg
111
Number of cavities
2
Left-hand Efficiency
Fuel type
Electric
Cavity type
Fanned
Power - conventional
-
Power - forced air convection
2.5
Volume
Litres
67
Energy consumption (electricity) - conventional
kWh / cycle
-
Energy consumption (electricity) - forced air convection
kWh / cycle
0.8
Energy efficiency index - conventional
-
Energy efficiency index - forced air convection
96.2
Energy class
A
Right-hand Efficiency
Fuel type
Electric
Cavity type *Drop Down Door
Fanned
Power - conventional
-
Power - forced air convection
2.5
Volume
Litres
67
Energy consumption (electricity) - conventional
kWh / cycle
-
Energy consumption (electricity) - forced air convection
kWh / cycle
0.8
Energy efficiency index - conventional
-
Energy efficiency index - forced air convection
96.2
Energy class
A
Additional Information
The oven complies with EN 60350-1
Maximum output @ 230V 50Hz
Conventional
2.2 kW
Multifunction
-
Multifunction (with Rapid Response)
-
Forced Air Convection
2.5 kW
Grill
2.3 kW
Slow Oven
-
Bread Proving Drawer
-
Maximum total electrical load at 230 V (approximate total including hob, oven lights, oven fan, etc.):
33
7.4 kW
Notes
34
For warranty compliance, the requirements are
that the appliance:
Name of Appliance & Colour*
•
Has been correctly installed in accordance with current
legislation, relevant British and European Standards and
Codes of Practice, by a suitably competent person registered
with Gas Safe or equivalent body and, where applicable, a
qualified electrician.
•
Has been used solely for domestic cooking purposes.
•
If in use in the UK*, has not been taken abroad as a personal
export. (In the Republic of Ireland conditions may vary, so
consult your retailer.)
•
Is not second-hand or a refurbished appliance. The
manufacturer’s warranty is not transferable.
•
Has not been subject to misuse, accidental damage or
modification, and has not deteriorated due to normal
domestic wear and tear, and the manufacturer’s
recommendations concerning cleaning materials have been
followed.
•
Has not been repaired by persons or organisations other than
those authorised to act on behalf of AGA Rangemaster.
Appliance Serial Number*
Natural Gas
LP Gas
Dual Fuel
Electric
Fuel Type*
Retailer’s Name & Address
Date of Purchase
Installer’s Name & Address
Installer’s Telephone Number
Date of Installation
*This information is on the appliance data badge - look in the appliance instructions
to find out where the data badge is located.
CONSUMER SERVICE
If you have any product enquiries, or in the event of a problem
with your appliance once it has been installed, please
telephone 0800 804 6261 or 0370 789 5107
from a mobile.
CONSUMER SERVICE LINES OPEN:
Monday to Thursday 8am–6pm
Friday 8am–5pm
Saturday 9am–1pm
WARRANTY
Your manufacturer warranty covers goods of our own brand for
defective workmanship and materials for a period of 1 year from the
date of purchase. This warranty covers mechanical breakdown and
proven cosmetic and manufacturing defects.
You will receive an additional FREE full 12 months guarantee by
registering your purchase using the FREEPOST form provided.
Alternatively, call free on 0800 587 5747, quoting reference
RMGX57A, or register online at www.rangemaster.co.uk.
Any damage, blemishes or chips identified upon receipt of the
product must be reported within 90 days – proof of purchase
may be required to establish validity. Scratches on the surface of
ceramic hobs must be reported within 14 days. Scratches caused
by usage are not covered. Accidental damage is not covered by the
manufacturer’s warranty.
Exceptions:
•
Items not included under the free 1 year guarantee include
pan supports, griddles, wok rings, baking trays, grill pans,
trivets, filters, light bulbs and other consumable accessories.
•
Any damage caused other than through normal use.
•
Breakdowns associated with cooking spillage.
•
Cosmetic deterioration deemed to be normal wear and tear.
This warranty is in addition to your Statutory Rights.
* Only certain models can be adapted for use with Mains Gas
supplied in the Channel Islands and Isle of Man.
OUT OF WARRANTY
We recommend that Rangemaster appliances are serviced regularly
throughout their life to maintain optimum performance and
efficiency. Service work should only be carried out by technically
competent and suitably qualified personnel.
For your own safety, always make sure that work is carried out by
a Gas Safe registered engineer for gas appliances or an approved
electrician for electrical models.
For a competetive quote and to arrange for a Rangemaster
approved engineer to attend, call Consumer Services on:
0800 804 6261 or 0370 789 5107 from a mobile.
SPARE PARTS
To maintain optimum and safe performance, we recommend
that only genuine Rangemaster spare parts are used. These are
available from most major spares stockists, including ourselves.
Contact Consumer Services on 0800 804 6261 or 0370 789 5107
from a mobile, who will be happy to help.
STANDARDS
Rangemaster cookers are designed and manufactured to
a recognised international quality standard, which meets
the requirements of BS EN ISO 9001, BS EN ISO 14001 and
OHSAS 18001 for continually improving environmental procedures.
Rangemaster cookers comply with the essential requirements of
the appropriate European Directives, and carry the CE mark.
Designed to impress
The Co-ordinating Collection.
•Refrigeration • Sinks & Taps • Hoods & Splashbacks • Built-in Cooking • Dishwashing
Built from experience
Clarence Street
Royal Leamington Spa
Warwickshire
CV31 2AD
England
Consumer Services: +44 (0)800 804 6261 or (0)370 789 5107 from a mobile.
Fax: +44 (0)1926 450526
E-mail: consumers@agarangemaster.co.uk
www.rangemaster.co.uk
For UK Trade Enquiries Tel: +44 (0)115 946 4000
Fax: +44 (0)115 973 6602
E-mail: sales@agarangemaster.co.uk
For ROI Enquiries Tel: 1850 302 502
Rangemaster is a trading name of AGA Rangemaster Limited
Registered in England and Wales. Registration No. 354715
Registered Office: Juno Drive, Leamington Spa, Warwickshire, CV31 3RG
Rangemaster continuously seeks improvements in specification, design and production of products and thus, alterations
take place periodically. Whilst every effort is made to produce up-to-date literature, this brochure should not be regarded as
an infallible guide to current specification, nor does it constitute an offer for the sale of any particular appliance.
4000275
0870648
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising