Ibanez | BTB | Owner Manual | Ibanez BTB Electric Bass Owner Manual

Ibanez BTB Electric Bass Owner Manual
BTB
A: Intonation adjustment screw
B: Saddle height adjustment screw (MR2/MR5: 1.5mm hex key wrench , MR4: 2.0mm hex key wrench)
C: Saddle lock screw (2.0mm hex key wrench)
D: Slid-able saddle lock screw (1.5mm hex key wrench)
MR2
MR4
B
B
C
A
A
Finger Ramp (BTB845V/846V)
MR5
B
b
A
a
MR5S
B
a: Ramp height adjustment screw
b: Ramp lock screw
D
A
STRING REPLACEMENT
MR2
Hook the ball end below the string catch at the rear of the bridge.
MR4
Slide the ball end into the ball end pocket.
MR5/MR5S
Hook the ball end below the string catch at the rear of the bridge.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising