Brinkmann | APP | Operating Instruction | Brinkmann APP TAS/STS301...2000, Suction Immersion Pumps Operating Instruction

Brinkmann APP TAS/STS301...2000, Suction Immersion Pumps Operating Instruction
Appendix B
for BD2610
Brinkmann Suction Immersions Pumps series TAS/STS/TES/SES
The TAS/STS/TES/SES series are centrifugal pumps
with semi open impellers and one axial impeller. The design is identical with the TAL/SAL/TL/STL
series, except the intake cover of the TAL/SAL/TL/STL series is replaced by a connecting cover
with an O-ring in the TAS/STS/TES/SES version, as shown on the drawing above.
The TAS/STS/TES/SES series allows suction against a negative pressure of up to 0.5 bar (7.25
PSI).
The characteristic pump curves of the TAS/STS/TES/SES pumps are corresponding with those of
the TAL/SAL/TL/STL series, reduced by the amount of negative pressure existing on the intake
side.
The minimum liquid level must be reached at any time during the operation of the pump.
Therefore, coolant must continuously be supplied at all times!
For further information please read the operating instructions BE2210, BE2510, BE2610 or
BE2710.
© Brinkmann Pumpen
Edition 06/19
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising