SATO | WS2 | Datasheet | Sato WS2 Datasheet

Sato WS2 Datasheet
The New Standard In
Healthcare Printing Solutions
WS2
A clinical-ready, compact, 2” printer designed
for patient safety and compliance
KEY FEATURES AND BENEFITS
Easy Operation Permits More Patient-Focused Time
• Simple drop-in media loading
• Transparent media window allows users to easily
monitor media reserves
• Tool-free maintenance
• Easy adjust sensor for compatibility with various media
Reduce Medical Missteps
• Direct thermal for HIPAA compliance
• Clinical-ready anti-microbial plastic casing
• Conducive for the use of disinfectant cleansers
Accurate Patient Information
• Cerner validated
• Easily integrates with existing HIS/EMR systems
Expediting Patient Workflows
• Print on Demand:
- SATO’s SoftTouch wristbands
- Laboratory specimen labels
- In-patient chart labeling
• The ability to control and configure many
printers within the user environment
• Standard on-board emulations for easier
integration
• Up to forty-three percent faster print
speeds than the market average
www.satoamerica.com/WS2
GENERAL SPECIFICATIONS / WS2
PRINTER MODEL
Print Resolution
Print Speed
WS208
WS212
203 dpi (8 dots/mm)
2, 3, 4, 5, 6, 7 inches/sec
(50, 76, 101, 127, 152, 177 mm/sec)
2 & 3ips for peel off mode
300 dpi (12 dots/mm)
2, 3, 4, 5 inches/sec
(50, 76, 101, 127 mm/sec)
2 & 3ips for peel off mode
PRINT SPECIFICATIONS
Method
Direct Thermal
Mode
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode, Peel Present mode
MEDIA SPECIFICATIONS
Sensor Type
Reflective Sensor (Movable), Transmissive sensor,
Head Open Switch
Media Type
Roll
Print Area - Maximum Length
WS208 - 100” (2,540mm)
WS212 - 50” (1,270 mm)
Print Area - Minimum Length
0.39” (10mm) ;
Min. length:1.0" (25mm) for cutter/peeler options
Print Area - Width
0.47" (12 mm) to 2.36" (60 mm)
Alignment
Centered
Roll Diameter
5”(127mm) OD on a 1”/1.5” (25.4/38 mm) ID core
4.5”(115mm) OD on a 0.5” (12.7mm) ID core
Wind
Supports both wind in/wind out media
SATO Genuine Consumables
For maximum print quality and optimum
use, SATO recommends the use of SATO
genuine consumables.
CORPORATE
10350-A Nations Ford Rd
Charlotte, NC 28273
Phone: (704) 644-1650
Fax: (704) 644-1662
sales-sallc@sato-global.com
MEMORY & PROCESSING
On-Board Memory
Standard Memory (Flash ROM): 16 MB
User Memory: 8 MB
Standard Memory (SDRAM): 32 MB
USB storage up to 32 GB (FAT32 format only)
CPU Type
32 bit RISC microprocessor
USER FRIENDLY SUPPORT TOOLS
LED Indicator
2 LEDs indicators Multicolor, Button x 1
Emulation
SZPL®, SEPL®, SDPL®
*Contact your SATO Sales Manager for more
information/requirements
OPTIONS
Peel Present, Full Cutter, WLAN
FONT SPECIFICATIONS
Internal Fonts
Bitmap support fonts of SZPL®, SEPL®, SDPL®
SOFTWARE
Label Editing
Windows Driver (Windows Vista/ Win 7/ Win 8/
Win 10), BarTender® from Seagull Scientific,
Nice Label
Utility
Network Printer Management Tool
COMMUNICATION INTERFACES SPECIFICATIONS
Standard
USB hosts (Type A) For Firmware Update, USB
device (Type B), Fast Ethernet supporting:
(IPv4/IPv6, WINS/Netbios)
Optional Wireless
Bluetooth 4.2 , WLAN (IEEE802.11 b/g/n)
BARCODE SYMBOLOGIES
Barcodes
Linear
Code 39, Code 93, Code 128 (ISBT128),
CODABAR (NW-7), EAN8/13, GS1 DataBar™,
GS1-128 (UCC/EAN128), Interleaved 2/5,
Industrial 2/5, JAN8/13, Matrix 2/5, MSI,
POSTNET™, UPC-A/E
2D Symbologies
PDF417, Micro PDF, Maxi Code, GS1 Data
Matrix, Data Matrix (ECC200), QR Code,
Composite Symbologies, Aztec
OPERATING & ENVIRONMENT CHARACTERISTICS
Electrical Requirements
Voltage: AC 100 V ~ 240 V ± 10 % (full range)
Frequency: 50 Hz - 60 Hz ± 5 %
Standards & Agency Approvals
FCC, cTUVus, CB, CE Marking, Wireless IEEE
Environment
Operating
41℉ to 104℉ (5 ℃ to 40 ℃)
25 %RH ~ 85 %RH (Without Condensation)
Storage
-4℉ to 140℉ (-20 °C to 60 °C)
10 %RH ~ 90 %RH (Without Condensation)
PHYSICAL CHARACTERISTICS
Weight
2.2 lbs. (1 kgs)
Dimensions
W 4.56" (116 mm)
H 6.69" (170 mm)
D 8.46" (215 mm)
LABEL MANUFACTURING, SERVICE & SALES
UNITED STATES
CANADA
MEXICO
CENTRAL AMERICA
CARIBBEAN
www.satoamerica.com/WS2
©2019 SATO America. All rights Reserved. Rev A • Any unauthorized reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered
trademark of SATO Holdings Corporation and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising