SATO | LP100R Laser Printer | Datasheet | Sato LP100R Laser Printer Datasheet

Sato LP100R Laser Printer Datasheet
LP 100R
Laser Printer
Industrial Laser Imaging System | Continuous Form
Fast, Accurate and Reliable Flash Fusion Printer.
Streamlined Features
• High Performance Laser
Imaging
• Superior Print Quality
• High Print Speeds at 100 ppm
• 18-inch Wide Continuous
Feed Web
• Variable Print Resolution
• Flexible Paper Handling
• Straight Paper Path
• Excellent Variable Data on
Custom Tags, Labels and Forms
• Increased Productivity
• Flash Fusion Technology
• Interactive Color Touch Screen
• User-Friendly Interface Holds up
to 999 Configurations
• Lower Cost Per Page
• Remote Access / Management
Industry Applications
•
•
•
•
•
•
•
•
•
Price Labels
Apparel Tags
EAS Tags & Labels
Multipart Forms
Routing Labels
Mailing Labels
Chesire Mailing Labels
Report Printing
Shelf Talker Labels
www.satoamerica.com
GENERAL SPECIFICATIONS
LP 100R
PRINTER MODEL
LP 100R
PRINT ENGINE
Printing Technology
Laser print engine with Flash Fusion for efficient label printing and a long-life organic photo conductor engine
Print Speed
65 ppm @ 18 inches x 8.5 inches (45.75 cm x 21.5 cm) / 50 ppm @ 18 inches x 11 inches (45.75 cm x 28 cm) /
100 ppm @ 8.5 inches x 11 inches (21.5 cm x 28 cm) - 2 up or 3,300 lpm @ 6 lpi
Variable Resolution
240, 300, 400, 480 and 600 dpi
Page Coverage
25% maximum toner coverage (20% on higher density)
SATO-LOGIC™ CONTROLLER
PC-Based Controller
Intel® Dual-Core based
Operator Panel
Touch-screen color display with graphic user interface (GUI); menu-driven setup
Font Management
Enables easy installation and management of user's fonts and graphics files (logos)
Memory
16 MB DRAM with 512 K cache
Hard Disk Drive
Internal unit; for storage of emulations, fonts, graphics and label formats
Multiple Media Drives
Available for file transfers, enhancements and software updates
USER FRIENDLY FEATURES
Standard Features
Easy and fully accessible straight through paper path; simple, drop in operator replaceable consumables for maximum print time;
replace toner without interrupting printing; colored Status LEDs visible from across the room; print quality maximized with alert
messages for impending as well as due consumable and PM life; printable and remote Time & Usage reports to monitor use and life;
two convenient operator control panels; removable stacker table on casters
EMULATIONS
Standard
Kodescript PLUS®, Kodescript®, IGP/PGL, IGP/VGL, Line Printer, PCL® 5e
Optional
Call for other options
CONNECTIVITY
Standard Interfaces
LAN; Fast Ethernet® (100BASE-TX), RJ 45 physical connector, supporting; TCP/IP Direct, LPR/LPD (CUPS) protocols
BARCODE SYMBOLOGY
Linear
Code 93, Code 128 Automatic (Standard), Code 128 -Manual, Code 39, Codabar, EAN 8, EAN 8 + 2 Character Extension,
EAN 8 + 5 Character Extension, EAN 13, EAN 13 + 2 Character Extension, EAN 13 + 5 Character Extension,
Interleaved 2 or 5, Straight 2 of 5, MSI, UPC-A (3 of 5 digit supplement added as an extension to the UPC-A Bar Code), UPC-E (Either
6 or 10 Characters), UPS 128 (10 and 17 Characters), Serialized Shipping UCC128, Ship to Postal UCC 128, Generic UCC/EAN 128
Postal
POSTNET, POSTNET+4, POSTNET+4+2, Intelligent Mail Barcode (IMB)
2-Dimensional
PDF417, Maxicode, QR Code
PAPER HANDLING
Paper Input
Continuous form pin-fed stock
Maximum Width
6-18 inches (15.25 cm - 45.75 cm)
Document Length
5-24 inches (15.2 cm - 60.9 cm)
Paper Thickness
6.5 mil to 20 mil thickness
Refold Length
7-16 inches (fanfold)
Image Area
5-17 inches wide (12.7 cm - 43.18 cm) x 4-22 inches high (10.16 cm - 55.88 cm)
Dead Zone
1/6 inch + 1/6 inch or No Margin Printing
FONTS
Standard Fonts
Over 50 standard fonts (TrueType®, Agfa® and Postscript ®) including ASCII, ASCII Bold, Swiss Medium, OCR-A and OCR-B
Optional Fonts
Additional Postscript Type 1 and TrueType
Power Supply
200-240 VAC/ 50 or 60 Hz, single phase, 30 amps
ELECTRICAL/ENVIRONMENTAL/PHYSICAL
Operating Temperature
50˚ F to 95˚ F (10˚ C to 35˚ C)
Dimensions (H x W x D)
47 inches x 36 inches x 37 inches (119 cm x 91.5 cm x 94 cm)
Relative Humidity
35%-80%
Weight
570 lbs (258.5 kg)
PRINTER OPTIONS
Guide
Swing guide, multiple stacker tables, Interface to external devices, roll to roll
Accessories
CORPORATE
10350-A Nations Ford Rd
Charlotte, NC 28273
Phone: (704) 644-1650
Fax: (704) 644-1662
sales-sallc@sato-global.com
3 color status Tower Light
LABEL MANUFACTURING, SERVICE & SALES
UNITED STATES
CANADA
MEXICO
CENTRAL AMERICA
CARIBBEAN
www.satoamerica.com
©2018 SATO America. All rights Reserved. Rev J • Any unauthorized reproduction of this content, in part or whole, is strictly prohibited • SATO is a registered
trademark of SATO Corporation and its subsidiaries in Japan, the U.S. and other countries. All other trademarks are the property of their respective owners.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising