Rane | MP 24Z | Data Sheet | Rane MP 24z Mixer Data Sheet

Rane MP 24z Mixer Data Sheet
DATA SHEET
MP 24z
DJ MIXER
MIC CONTROL
-2
SOURCE CONTROL
PROGRAM EQUALIZER
LINE 1 LINE 2
LINE 1 LINE 2
LINE 4 LINE 5
AUX/ PH 1
LINE 3 AUX/ PH 2
LINE 3 PH/ AUX 3
LINE 6
2
-6
LINE 4 LINE 5
LINE 3
LINE 6
LOOP
CUE
CUE
CUE
1
2
2
3
6
4
10
10
10
10
10
10
10
10
8
8
8
8
8
8
8
8
-2
6
MIN
2
-6
MAX
-2
6
MIN
BASS
2
-2
-6
6
MAX
MIN
MAX
HI-MID
MID
2
-6
6
MIN
MAX
TREBLE
6
8
0
10
PEAK PROGRAM METER
LEFT
MIN MAX
BASS
6
6
6
6
6
6
6
6
4
4
4
4
4
4
4
4
2
2
2
2
2
2
2
2
10
10
8
8
6
6
4
4
2
2
0
0
-20 -15 -10
6
2
8
MIN MAX
AUX MIC LEVEL
4
-6
BOOTH LEVEL
4
2
2
-6
4
ENGAGE
10
2
MIN MAX
MID
-2
EQ
8
0
CUE
6
-2
6
2
MIN MAX
TREBLE
-2
4
ENGAGE
6
-6
ZONE LEVEL
6
2
0
8
0
0
0
0
ACTIVE CROSSFADER
MAX
MAIN
OL
MIC LEVEL
0
0
2
3
0
4
2
4
6
8
10
B
F 60
1
2
3
4
-1
0
+1
+3
+5
+8
dB
MIXER
HEADPHONE CONTROL
4
6
2
CUE / PGM
2
STEREO
ENGAGE
2
A
-3
TM
ENGAGE
MIC
ASSIGN
-5
MP 24z
0
MIN
1
-7
RIGHT
10
8
6
4
2
0
MASTER LEVEL
ASSIGN
8
0
LEVEL
10
6
6
CUE
PAN
PGM
POWER
MONO
CUE LEFT /
PGM RIGHT
General Description
The Rane MP 24z Mixer is the standard for night club mixers. Following the advice of the most renowned figures in the
night club market, Rane developed the MP 24z to break down
the limiting barriers of previous mixer designs.
Featuring four Stereo Input mixing Channels, each supplied
with a selection of several Phono and Line Inputs, the MP 24z
easily suits the needs of the most complex audio/video installations. A total of six Stereo Line Inputs are available plus three
Stereo Phono Inputs.
The Mic Control section of the MP 24z handles two microphones simultaneously. Both mics may be contoured by the
three-band Mic Equalizer as well as processed through a Mic
Loop jack. On the rear of the unit, an XLR low-Z Main Mic
Input with switchable Phantom Power, and a ¼" hi-Z Aux Mic
Input are both mixable.
The Output section of the MP 24z provides a Master Level
fader, four band Program Equalizer (independent of the Microphone EQ), two auxiliary output controls (Zone and Booth),
a stereo 12-segment Peak Program Meter and full Headphone
Control monitoring and cueing system.
The rear of the MP 24z, besides holding all of the normal Input and Output connectors, features a transformer isolated Light
Control Output with associated Level control, balanced XLR
Main Outputs, Program Equalizer EQ Range switch (±4 dB or
±8 dB) and a System Mono switch.
All sliders on the MP 24z are studio-quality faders as found
on high quality audio mixing consoles.
New features have been added to the MP 24z. Active Crossfader™ technology combines state of the art voltage controlled
amplifier design with a professional quality crossfader control.
This combination sets new standards for performance, reliability
and serviceability. Virtually all crossfader noise is eliminated.
Channel to channel crosstalk is greatly reduced and the off isolation of the faded channel is greatly increased. Active Crossfader
technology dramatically increases the service life of the crossfader. In the unlikely event of crossfader failure, there is no loss
of signal. If a crossfader becomes rough or noisy, it may be “hotswapped” during a performance with no interruption of the audio
signal. Simply use the input faders to set the audio levels while
the crossfader is out of service.
Each of the Phono Inputs can be converted to Line Inputs by
moving internal jumpers. Another internal jumper allows defeating the Booth Ducker circuit when the mic is activated — this
feature has been requested by those wishing to use the Booth
Output as a second record output or second zone. Another
jumper allows the Mic section to be mixed to the Tape Outs
— the default setting is “music only”.
Features
•
•
•
•
•
•
•
'Dipless' 60 mm Crossfader; Optional 45 mm Crossfader
Front Panel Replaceable Active Crossfader™
Four Stereo Input Mixing Channels
Six Stereo Line Inputs & Three Stereo Phono Inputs
Two Mic Inputs with Three-Band EQ
Mic & Two Program Effects Loops
Headphone Cueing
•
•
•
•
•
•
•
Four Band Program EQ
Balanced XLR Master Output
Two Auxiliary Outputs
Isolated Light Control Output
Phono Inputs Convertible to Line
Switchable Booth Ducker
UL/CSA/CE and 100/120/230 VAC Remote Power Supplies
Data Sheet-
Parameter
Input Impedance: Phono
..........Line, Effects Returns
..........Main Mic, Loop
..........Aux Mic
Max Input Level: Line
..........Phono (1 kHz)
..........Main Mic
..........Aux Mic
Output Impedance: Main
..........Zone, Booth, Light
..........Loop, Tape
..........Effects Send
..........Headphone
Max Output Level: All
Infrasonic Filter
Ultrasonic Filter
Frequency Response
THD+Noise
Signal-to-Noise Ratio
..........Phono to Tape
.........Phono to Master/Zone/Booth
..........Line to Master/Zone/Booth
..........Main Mic
RIAA Phono Stages
Crosstalk
Program Equalizer: Bass
..........Mid
..........Hi-Mid
..........Treble
..........Range
Microphone Equalizer: Bass
..........Mid
..........Treble
..........Range
Unit: Agency Listing
..........120 VAC model
..........230 VAC model
Power Supply: Agency Listing
..........120 VAC model
..........230 VAC model
Power Supply Requirement
Maximum Current
Unit Construction
..........Size
..........Weight
Shipping: Size
..........Weight
Note: 0 dBu=0.775 Vrms
Data Sheet-
Specification
47.5k (shunted by 200 pF)
20k
1k
100k
22
180
+17 (-15.5)
+3.5 (-38)
600 Bal. (300 unbalanced)
100
10
10 (230)
0.8
+28 (+22)
15 Hz, 18 dB/oct
30 kHz, 12 dB/oct
15 Hz-30 kHz
0.1
Limit
1%
1%
1%
1%
1
5%
1
1
1%
5%
5%
5%
max
1
3%
3%
+0/-3
typ
Units
Ω
Ω
Ω
Ω
dBu
mV
dBu
dBu
Ω
Ω
Ω
Ω
Ω
dBu
Hz
Hz
dB
%
91
90 (71)
94 (76)
123
Equalization accuracy:0.1
-60
Shelving @ 100
Peaking @ 1.6k
Peaking @ 4.0k
Shelving @ 10k
±8 or ±4
Shelving @ 100
Peaking @ 1k
Shelving @ 10k
±10 Bass & Treble; ±9 Mid
1
1
1
1
typ
max
5%
5%
5%
5%
1
5%
5%
5%
1
dB
dB
dB
dB
dB
dB
Hz
Hz
Hz
Hz
dB
Hz
Hz
Hz
dB
Class 2 Equipment
U.L. 813 Exempt
CSA Exempt
VDE, SELV
CE (EMC)
CE (safety) Exempt
UL listed
CSA Certified
CE (EMC)
CE (safety)
18 VAC w/ center tap
750
All Steel
7"H x 19"W x 5.3"D (4U)
11 lb
11" x 23" x 16"
18 lb
mA
Conditions/Comments
Min Gain (Max Gain)
Min Gain (Max Gain)
300 Ω each leg to ground
Stereo (Mono)
Balanced (Unbalanced) >2 kΩ
Butterworth
+4 dBu, 20-20 kHz, any In, any Out
re +4 dBu, 20 kHz noise bandwidth
Input fader Max
Main fader unity (Max)
Main fader unity (Max)
Equivalent input noise
Channel to channel, 1 kHz
Switch selectable
National Electrical Code
Class 2
Class 2
Safety extra low voltage
EMC directive 89/336/EEC
Article 1 of LVD 73/23/EEC
Class 2 equipment
File no. E88261
File no. LR58948
Meets EMC directive 89/336/EEC
LV directive 73/23/EEC
RS 1 (see data sheet)
RMS current from remote supply
(17.8 cm x 48.3 cm x 13.5 cm)
(5.0 kg)
(27.9 cm x 58.4 cm x 40.6 cm)
(8.1 kg)
MP 24z
DJ MIXER
Block Diagram
PH 1
CUE
RIAA
CH. 1
IN
LEFT MAIN
EFFECTS
LOOP
RETURN
IN
PH 2
CH. 1
LEVEL
RIAA
IN
SWITCHABLE
LOOP
CUE
OUT
PH 3
RIAA
CH. 2
LEVEL
FLAT
CROSSFADER
CUE
RIGHT EFFECTS
SEND JACK
15
Hz
(18 dB/OCT)
+
RIGHT
CHANNEL
CH. 3
LEVEL
LINE 2
CUE
BALANCED
BUFFER
(+)
MAIN
UNBALANCED
OUTPUT
LOW
FILTER
CH. 3
LINE 1
LOOP
ENGAGE
MASTER
SUMMER
METER
SENSITIVITY
ADJUST
(REAR)
PRE-EQ
MONO
LEFT MAIN
EFFECTS
LOOP
SEND
(MONO)
CH. 2
OUTPUT METER
TAPE OUT
POST
PRE
LOOP
LOOP
MIC
TO
TAPE
CH. 4
SYSTEM
MONO
(REAR)
PROGRAM
EQ
LINE 3
2
1
3
(–)
MAX
OUTPUT
GAIN
REDUCTION
(REAR)
RIGHT BOOTH
OUTPUT JACK
MASTER
LEVEL
EQ
ENGAGE
LEFT
BOOTH
OUTPUT
(POST-EQ)
CH. 4
LEVEL
LINE 4
BOOTH
DUCKER
DEFEAT
+
LINE 5
PRE EQ
LINE 6
MIC AMP
PHANTOM
POWER
+
AUX MIC
(HI-Z)
LEFT
ZONE
OUTPUT
+
OUT: STEREO PROGRAM/CUE
IN: MONO- PROGRAM: RIGHT
CUE: LEFT
R PROGRAM
LEFT
O/L
SENSE
MIC
ENGAGE
RIGHT ZONE
OUTPUT JACK
ZONE
LEVEL
MIC
EQ
MIC AMP
POST-EQ
MONO
L CUE
LEFT
CUE
SWITCHES
MIC
SUMMER
LEVEL
DUCKER
L PROGRAM
TIP=SEND
RING=RETURN
MAIN MIC
(LO-Z)
BOOTH
LEVEL
POST EQ
ENGAGE
MIC
SWITCH
MIC
LOOP
MAIN
BALANCED
OUTPUT
ENGAGE
MIC
INDICATOR
PRE-EQ
MONO
R CUE
RIGHT
CUE
SWITCHES
+
HEADPHONE
LEVEL
HEADPHONE PAN
+
LEVEL
HEADPHONE
OUT
POST-EQ
MONO
PROGRAM
RIGHT
POST-EQ
MONO
MONO CUE
LIGHT
OUTPUT
LEVEL
ISOLATION
TRANSFORMER
LIGHT
CONTROL
OUTPUT
N.C.
Application Information
Extreme care must be taken when installing the MP 24z. So
many pieces of equipment all connect to the MP 24z that if proper
interconnection wiring is not done, many problems occur. Our
technical service people spend the majority of their MP 24z time in
just unraveling improperly wired systems. Everything from bad RCA
cables (common) to incorrectly grounded cables (very common) cause
unnecessary complaints. Also, many units returned for noisy Loop
related problems turn out to be problems with the unit installed in
the Loop — not with the MP 24z.
Here are a few of the important user details of the MP 24z:
The Master Level control on the front goes to 10. But what
10 means is determined by the Max Output Gain Reduction
control on the rear (out of the way of inquisitive fingers). You
limit the max gain, hence, the max output, using this control.
This allows the MP 24z to be operated at compatible maximum
levels for the system power amps.
Likewise, the Peak Program Meters are calibrated by the rear
mounted Meter Sensitivity Adjust control. Output levels ranging
from 0.6V to 10V may be set to indicate full scale on the Meters.
Once calibrated, this means when all LEDs are lit you know the
system is, in fact, at maximum level.
The labeling on the Program Equalizer control knobs indicate Max or Min at their extremes. What this means is again
determined by a switch on the rear panel. You have two choices:
±4 dB or ±8 dB, both modest amounts. You determine what the
system allows in the way of maximum added EQ and set it. The
operator is happy because they can rotate the pots to their extremes, and you are happy because you know this cannot destroy
anything. Everybody wins with an MP 24z.
Data Sheet-
MP 24z
DJ MIXER
Rear Panel
ZONE OUTPUT
L
R
EQ
RANGE
TAPE OUT
SYSTEM
MONO
L
MAIN EFFECTS LOOP
SWITCHABLE LOOP
PH 3
L
R
L
R
L
L
R
R
RETURN
RETURN
SEND
MONO *
SEND
RETURN
SEND
RETURN
SEND
L
AUX 2
AUX 1
USING INTERNAL RIAA DEFEAT JUMPERS
L
L
L
R
L
±8dB
R
MONO *
UNBALANCED
±4dB
PRE LOOP
MAIN OUTPUTS
* MONO OUTPUTS
CAUTION
DO NOT UNDER ANY CIRCUMSTANCE
"STORE" PHONO SHORTING PLUGS
IN TAPE OUT JACKS. THIS WILL
SHORT SIGNAL PATH TO GROUND
CAUSING A LOW DISTORTED SIGNAL
TO ALL OUTPUTS. INSTALL IN
UNUSED INPUTS ONLY.
R
LINE 6
POST LOOP
PLUGGING ONLY INTO
LEFT YIELDS L+R
OUTPUT. PLUGGING
INTO BOTH YIELDS
STEREO OUTPUT.
L
MONO *
BOOTH
OUTPUT
UNBALANCED
R
BALANCED
OUTPUT
1: COMMON
2: POSITIVE
3: NEGATIVE
CASE: CHASSIS
DO NOT SHORT
PIN 3 TO GND!
USE ONLY PIN 2
AND PIN 1 FOR
UNBALANCED
SYSTEMS
L
FULLY
BALANCED
R
R
LINE 5
LINE 4
R
AUX 3
PH 2
R
LINE 3
LIGHT CONTROL OUTPUT
LINE 2
0
dB
MAX OUTPUT
GAIN REDUCTION
MAIN
MIC
MP 24z
RANE CORP.
MONO
TRANSFORMER COUPLED
MIC
1: COMMON
2: POSITIVE
3: NEGATIVE
CASE: CHASSIS
AUX
MIC
(HI-Z ONLY)
N108
USE FOR
WIRELESS
MICS
L
4
UNBALANCED
SIG GND
CHASSIS
750mA
GND
CLASS 2 EQUIPMENT
LIFT
PHANTOM
POWER
+15V
8
0
10
LIGHT OUTPUT LEVEL
5V 4V 3.5V
6V
2.5V
10V
1.7V
1V
OFF 0.6V
POWER
MIC
LOOP
TIP=SEND
RING=RETURN
6
2
R
PH 1
GROUNDING POST
-6
-22
LINE 1
BOOTH
DUCKER
ACTIVE
DEFEAT
METER SENSITIVITY ADJUST
Architectural Specifications
The mixer shall have four (4) stereo mixing buses, each
equipped with studio quality 60mm faders. Fully programmable
smooth and silent active crossfading between any two of the
input channels shall be included. There shall be three (3) stereo
phono inputs and six (6) stereo line level auxiliary inputs. Provisions shall exist for simultaneous use of two microphones, with
separate 3-band equalization and external processing loop. Two
effects loops shall be provided with front panel control of one.
Program equalization shall be provided with a 4-band equalizer.
Separate Booth and Zone stereo outputs shall be provided with
individual level controls. A transformer isolated light trigger
output with level control shall be included. Program metering
shall be via a stereo (12) segment LED meter. Complete cueing
and headphone monitoring system shall be built-in.
RFI filters shall be provided. Infrasonic and ultrasonic filters
shall be built-in.
The unit shall be capable of operation by means of an external safety extra low voltage power supply connected to 120 VAC
(240 VAC where applicable). The unit and the power supply shall
be CE certified. The unit shall be entirely constructed from coldrolled steel.
The unit shall be a Rane Corporation Model MP 24z.
Accessories
• F 45 Fader Kit - 45 mm Crossfader Replacement
• F 60 Fader Kit - 60 mm Crossfader Replacement
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 USA TEL 425-355-6000 FAX 425-347-7757 WEB www.rane.com
Data Sheet-
All features & specifications subject to change without notice. DOC 105587
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising