Rane | RAP 10 | Data Sheet | Rane RAP 10 Power Supply Data Sheet

Rane RAP 10 Power Supply Data Sheet
RAP 10
Professional Audio Products Data Sheet
General Description
The Rane RAP 10 Remote AC Power Supply is designed
specifically to power Rane units designed for remote AC
powering, eliminating the need for individual remote power
supplies. Use of the 2-space RAP 10 makes for a compact
power supply solution, and adds a Master Power switch to the
Outputs from the RAP 10 may be used to power up to ten
Rane products designed for remote AC input power from the
RS 1 (e. g., GE 30, PE 15/17, AC 22/23/B, DC 24, etc.)
· Ten Isolated 650 mA Outputs
· Self-Resetting Overload Protection
· 120 VAC 60 Hz Model UL and cUL Listed
· 230 VAC 50 Hz Model Meets EMC and Low Voltage Directives
Output Voltage
Maximum Output Current
Max/Min Output Voltage
Primary & Output Protection
RJ-12 Cables
Interconnecting Cable Length
AC Line Connection
Unit: Agency Listing
..........120 VAC model
..........230 VAC model
Maximum Power Usage
Line Voltage: Domestic
Unit: Size
Shipping: Size
18 CT (center tap: 9+9)
22.8 CT / 16.2 CT
PTC Resistors
6-Wire, 24 AWG, Black
25' (7.6 m)
3-Wire, 3-Prong Line Cord
Schuko Cord w/CEE 7/7 Plug
cUL (Canada)
CE-EMC Certified (EN55103)
CE-Safety Certified (EN60065)
95-130 VAC, 50/60 Hz
190-250 VAC, 50 Hz
3.5" H x l9" W x 5.3" D
10 lb
4.5" x 20.3" x 13.75"
14 lb
Each of the 10 outputs is individually protected against
overloads in excess of 650 milliamps (including short
circuits); a problem on one output will not endanger the
operation of the RAP 10. All protection devices are solid-state
and self-resetting—no glass fuses are used.
In addition, the RAP 10 is UL listed, cUL listed for
Canada, and meets EMC and Low Voltage directives. All
units powered from a RAP 10 qualify as safety extra-low
voltage (SELV) units and are exempt from agency safety
Solid-State Protected Outputs with No Glass Fuses
100% Load Tested
All Steel Construction
Includes Ten Connecting Cables
Load = 650 mA, 120/230 VAC line
Each Output
No Load / Full Load, ±10% Line
10 Cables Included
Recommended Maximum
120 VAC Domestic & Export Models
230 VAC Export Models
Class 2 Equipment
U.L. 813 (file E104174)
C22.2 (file E104174)
EMC Directive 89/336/EEC
LV Directive 73/23/EEC
(8.9 cm x 48.3 cm x 13.5 cm)
(4.5 kg)
(11.5 cm x 52 cm x 35 cm)
(6.4 kg)
R AP 10
Professional Audio Products Data Sheet
Rear Panel
Connector Wiring Diagram
Architectural Specifications
The remote power supply shall be configured for 2-space
horizontal rack mounting with ten (10) outputs terminated in
RJ-12 (6-wire) modular connectors. All outputs shall be rated
for 18 VAC with center-taps. Outputs shall be rated for a
maximum of 650 milliamps each. All protection devices shall
be solid-state and self-resetting.
The unit shall be capable of operating from AC line
voltages of 95-130 volts, 50/60 Hz (or 190-250 volts AC, 50
Hz if applicable) and be supplied with a 3-wire, 3-prong line
cord for domestic (and selected export) 120 VAC units, or a
“Schuko” continental European cord with a CEE 7/7 plug on
the 230 VAC model.
The 120 VAC unit shall be UL listed to UL 813
specifications, and cUL listed to Canadian standard C22.2.
The 230 VAC unit shall meet the European Union's EMC
directive, 89/336/EEC and the Low Voltage directive, 73/23/
EEC and shall bear the CE marking.
The remote power supply shall be a Rane Corporation
Model RAP 10.
©Rane Corporation 10802 47th Ave. W., Mukilteo WA 98275-5098 TEL (425)355-6000 FAX (425)347-7757 WEB http://www.rane.com
Printed in the U.S.A. on Recycled Paper
All features & specifications subject to change without notice 05833 NOV97
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF