advertisement
▼
Scroll to page 2
16+1 PoE+ Camera Switch 1 Quick Start Guide 2 Network Cameras* Router / LAN* Up to 300ft / 91m Front Panel SFP port Back Panel * Not included / sold separately. 3 Power Remove dust cap to use. NOTE: Use RJ45 or SFP to connect to port 17. You may not use both simultaneously. ACCLPS263B_QSG_EN_R2 16+1 PoE+ Camera Switch Quick Start Guide Technical Specifications NAME LED Indicators System NAME COLOR PWR Green MEANING MEANING ON: The switch is receiving power. OFF: The switch is not receiving power. Ports 16× 10/100Base-TX RJ-45 Auto-MDI/MDI-X ports 1× 10/100/1000Base-T RJ-45 Auto-MDI/MDI-X port 1× 1000Base-X SFP interfaces, shared with port 17 PoE Standard IEEE 802.3af / 802.3at PoE PoE Power Output Per Port 51V DC, Max. 30.8W Total Power Ouput 220W across ports 1~16 (at 104°F / 40°C) 200W across ports 1~16 (at 122°F / 50°C) Standard Compliance IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3ab Gigabit Ethernet IEEE 802.3x Full-Duplex Flow Control IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus Operating Humidity 5 ~ 95% (non-condensing) Operating Temperature 32° ~ 122°F / 0° ~ 50°C Power Input 100~240V AC, 50/60Hz, 3.5A Dimensions (W×D×H) 17.4 × 8.2 × 1.7” 441 × 208 × 44mm 1U height Weight 5.9lbs / 2.7kg Port 1 ~ 16 NAME COLOR MEANING LNK/ACT Green ON: Successfully established link at 10/100Mbps. FLASHING: Switch is sending/receiving data. OFF: No connection. PoE In-Use Orange ON: Port is providing 51V DC in-line power. OFF: Connected device is not a PoE Powered Device (PD). Port 17 (RJ-45) NAME LNK/ACT COLOR Green MEANING ON: Successfully established link at 10/100/1000Mbps. FLASHING: Switch is sending/receiving data. OFF: No connection. Port 17 (SFP) NAME LNK/ACT COLOR Green MEANING ON: Successfully established link at 1000Mbps FLASHING: Switch is sending/receiving data. OFF: No connection. SPECIFICATION FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. ACCLPS263B_QSG_EN_R2
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project