Lorex | LEV8532BW | Quick Start Guide | Lorex LEV8532BW 4K Ultra HD Resolution 8MP Outdoor Dome Camera Quick Start Guide

Lorex LEV8532BW 4K Ultra HD Resolution 8MP Outdoor Dome Camera Quick Start Guide
Resources
Package Contents
•
•
•
•
Need Help?
4K Mini Fixed Eyeball Dome Camera
Mounting Kit*
BNC / Power Extension Cable*
Power Adapter**
Visit us online for up-to-date software
and complete instruction manuals
* Per camera in multi-camera packs.
** A multi-camera power adapter that provides power to multiple
cameras or individual power adapters may be provided depending on
product configuration.
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use with
this camera (included). Only the included power adapter can be used. Use of
a non-regulated, non-conforming power supply can damage this product and
voids the warranty.
Safety Precautions
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels
noted in the camera’s specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only the supplied regulated power supply provided with the
product. Use of a non-regulated, non-conforming power supply can
damage the product and void the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use
any harsh, chemical-based cleaners.
• The supplied cable is rated for surface mounting only. Cables for in-wall
and floor-to-floor installations are sold separately (CMR type). These
and other cables are available at lorex.com.
1
Visit lorex.com
2
Search for the model
number of your product
3
Click on your product
in the search results
4
Click on the Downloads tab
4K Mini Fixed Eyeball
Dome Camera
Quick Start Guide
English Version 2.0
Dimensions
2.5” / 64mm
3.9”
99mm
Weight
Installation Tips
0.7lbs / 0.3kg
• Point the camera where there is the least amount of obstructions
(i.e., tree branches).
• Install the camera where vandals cannot easily reach.
• Secure cabling so that it is not exposed or easily cut.
• This camera is rated for outdoor use. Installation in a sheltered
location is recommended.
Changing the DVR
4K Resolution
Connecting
the to
Cameras
The output resolution of a Lorex HD DVR is set to 1080p as a default. To view 4K
resolution on a 4K monitor, the output resolution must be changed using the DVR
menu.
Disclaimers
• For a full list of compatible recorders, visit lorex.com/compatibility.
• Not intended for submersion in water. Installation in a sheltered
location recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
To change the output resolution through a Lorex HD DVR:
1. Right-click on the Live View to access the Quick Menu.
2.
3.
4.
5.
6.
Click Main Menu and then click the Setting icon (
Click Setting > Display.
Click the Display tab.
In the Resolution drop-down menu, select 3840 x 2160.
Click Apply to save and click OK to exit.
).
Copyright © 2019 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves
the right to modify product design, specifications and prices, without
notice and without incurring any obligation. E&OE. All rights reserved.
LEV8532_QSG_EN_R2
LEV8532 SERIES
www.lorex.com
Connecting the Camera
Installing the Camera
ATTENTION:
Test the camera prior to selecting a permanent mounting location by temporarily
connecting the camera(s) and cables to the DVR.
Cable Extension Options
Male Power
Female Power
Before Installing the Camera
• Decide whether to run the cables through the
wall / ceiling (drilling required) or along the
wall / ceiling.
This camera can only be used with 4K rated extension
cables. For details, see ‘Cable Extension Options’.
Camera
Connect the BNC connector
to a video input on your DVR.
1. Use the included Allen key to loosen the adjustment screw on
the dome cover.
Cable Length
1
CB120URB1A
120ft (37m)
2
CB250URB1A
250ft (76m)
3. Use the included mounting template to mark and drill holes for
the included mounting screws.
NOTE: Insert the included drywall anchors if installing into
drywall.
4. Feed the camera cable through the camera base.
5. Connect the video and power cable as detailed in the section
‘Setting up the Camera’.
6. Attach the camera base to the mounting surface using the
included screws.
7. Position the dome cover over the ball camera and twist
clockwise onto the camera base. Do not tighten completely.
8. Move the ball camera to the desired position. While holding the
ball camera in place, twist the dome cover the rest of the way
to secure it to the camera base. Holding the camera prevents it
from moving while tightening the dome cover.
9. Use the included Allen key to tighten the adjustment screw on
the dome cover.
10. Remove the vinyl film from the camera lens when your
installation is complete.
Connect the male power head
and the BNC connector to the
camera.
Mounting
screws (×4)
Connect the female power
head to the included power
adapter.
Problem
• Only use the approved power supply and 4K
extension cables provided with camera.
• Ensure that you have set the DVR to 4K output
resolution. See ‘Changing DVR to 4K Resolution’
for details.
• The cameras are only compatible with certain
Lorex HD DVRs. For the full list of compatible
recorders, visit lorex.com/compatibility.
• Ensure your TV or monitor is on the correct
input channel. Common terms for input
channels: INPUT, AV CHANNEL, LINE1, LINE2,
AUX.
• Ensure your DVR is properly connected to your
TV or monitor.
• Ensure connections are properly connected.
• Ensure the camera power supply is plugged in.
• Ensure that you only use the included power
cable.
Picture is too bright
• Ensure your camera isn’t pointed directly at a
source of light (e.g., sun or spot light).
• Check the brightness settings of the DVR and
monitor.
• Move your camera to a different location.
Picture is too dark
• Check the brightness and contrast settings of
the DVR and monitor.
Night vision is not working
• Only use the approved power supply and 4K
extension cables provided with camera.
• The night vision activates when light levels
drop. The area may have too much light.
Picture is not clear
• Only use the approved power supply and 4K
extension cables provided with camera.
• Check the camera lens for dirt, dust,
spiderwebs. Clean the lens with a soft, clean
cloth.
• Make sure that the cable run is within the
limitations specified in the section ‘Cable
Extension Options’.
• Remove the vinyl film from the camera lens
when your installation is complete.
Bright spot in video when
viewing camera at night
• Night vision reflects when pointing a camera
through a window. Move the camera to a
different location.
A multi-camera power adapter that provides power to multiple cameras
or individual power adapters may be provided, depending on product
configuration.
Individual Power Adapter*
Multi-Camera Power Adapter*
* Only the included power adapter can be used. Images for representation only.
Connecting
Setup Diagram
the Cameras
BNC Video
Extension Cable
Camera
12V DC Power
HD DVR
Ball
camera
Dome
cover
Solution
No picture / signal
Connecting
the Types
Cameras
Power
Adapter
Mounting
template
Camera
base
1. The extension cable must be a single stretch of cable between the DVR and
camera. You cannot connect multiple extension cables to each other.
2. Indicators that your cable run may be too long:
• Camera loses video when switching to night vision.
• Video is permanently black & white (even during day time).
• Video is unclear, soft, or distorted.
3. For more information on extension cables, visit lorex.com.
Troubleshooting
2. Rotate the camera base counter-clockwise to separate it from
the ball camera and dome cover.
Adjustment
screw
Model Number
Notes:
DVR
To install the camera:
Drywall
anchors (×4)
Option
Cable Notch
• If you run the cables along the wall / ceiling,
you must run the cable through the cable
notch on the base. This will keep the camera
base flush to the surface when mounted.
Mounting
surface
Extend the cable run for your camera depending on the cable type used. Additional
extension cables sold separately. See table below:
Power Adapter
LEV8532_QSG_EN_R2
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising