Honeywell | 640 Series Thru-Shaft Potentiometers | Datasheet | Honeywell 640 Series Thru-Shaft Potentiometers Datasheet

Honeywell 640 Series Thru-Shaft Potentiometers Datasheet
Thru-Shaft Potentiometers
640 Series
Datasheet
640 Series Thru-Shaft Potentiometers
Potentiometers convert rotary motion into a change of resistance, supplying a smooth transition of voltage or current
levels. The resulting voltage output may be used to control position transducers in a wide variety of potential applications.
The 640 Series Thru-Shaft Potentiometers are actuated by a customer-provided actuator shaft instead of by a shaft/
bushing integral to the sensor. The low-profile housing allows use where space is at a premium.
All versions are sealed for dust. Splash-sealed or moisture-sealed options feature O-ring seals between the rotor and
housing and cover; and epoxy sealing between the leadwires, the housing and the cover.
The 640 Series are available in resistances from 1 kOhm to 1 MOhm, inclusive. Tapers include linear and a 360° quadrature
voltage to meet a wide range of application requirements.
A dual-contact version allows for two mechanically-tracking electrical actions, or true 360° quadrature voltage output.
Potential Applications
Key Features and Benefits
•
•
•
Thru-shaft configuration actuated by customer-
Transportation
provided actuator shaft: Allows use in space-constrained
Position and movement detection in construction/agricultural
applications where there may not be enough room for a
vehicles/equipment:
shaft/bushing integral to the sensor
•
throttles)
Reinforced, low-profile housing: Allows use in rugged
environments where space constraints may be present
•
Pedals
Dust sealed with splash- or moisture-sealed options:
•
Steering equipment
Designed to provide protection against dust or moisture
•
Vehicle manual controls (e.g., gear shifters, joysticks, and
ingress
Industrial
Long rotational life of greater than one million cycles:
•
Audio/visual equipment dial control
Promotes extended life in the application
•
Industrial vehicle attachment position (e. g. forklift truck forks)
•
Machine control joystick position
•
Robotic arm position
•
Valve actuator position
•
Material handling equipment position
THru-SHAFT • LOW PROFILE • LONG ROTATIONAL LIFE
2
sensing.honeywell.com
Thru-Shaft Potentiometers, 640 Series
Table 1. Electrical Specifications
Parameter
640CS103A06NAAY
640ES103A06NAAY
640GS103B06NBAY
640GS103B06NBBY
640009M9405
Characteristic
Table 640-A
Table 640-B
Supply voltage
350 Vdc, max.
Dielectric withstanding voltage
500 Vac RMS
Effective electrical travel (approx.)
80°, 170°, 350°, 155° (dual) 350° (See Order Guide Tables on pp. 5, 6.)
Resistance
Resistance tolerance
Table 640-C
1 kOhm to 1 MOhm
±15, ±10, ±5, ±2 (laser trimmed) (See Order Guide Tables on pp. 5, 6.)
Linearity (independent)
±5%
Power
±1% (laser trimmed)
0.5 W, max.
Table 2. Mechanical Specifications
Parameter
Characteristic
Thru hole
Mechanical travel with stops
Stop torque
Rotational life
Operating torque:
splash sealed
moisture sealed
Leadwires
Material:
housing, cover, rotor
leadwires
640CS103A06NAAY
640ES103A06NAAY
640GS103B06NBAY
640GS103B06NBBY
640009M9405
6,53 mm [0.25 in] dia. with
2,67 mm x 2,29 mm
[0.105 in x 0.090 in] deep slot
6,53 mm [0.25 in] dia. with
5,54 mm [0.218 in] D-flat
6,53 mm [0.25 in] dia. with
2,67 mm x 2,29 mm
[0.105 in x 0.090 in] deep slot
90°, 180°
360°/continuous
5 in lb min.
>1 million full cycles
>5 million dither cycles (2 degree stroke, 60 strokes/s) result in <10% total resistance change
42 mN m [6 oz-in] (See Order Guide Tables on pp. 5, 6.)
71 mN m [10 oz-in] (See Order Guide Tables on pp. 5, 6.)
20 AWG, SAE J-1560 type TXL stranded (7 x 28 AWG), 152,4 mm [6 in] long
reinforced thermoplastic
20 AWG, SAE J-1560 type TXL stranded (7 x 28 AWG); header connection option available
sensing.honeywell.com
3
Thru-Shaft Potentiometers
Table 3. Environmental Specifications
Parameter
Characteristic
640CS103A06NAAY
640ES103A06NAAY
640GS103B06NBAY
640GS103B06NBBY
Operating temperature
-40 °C to 120 °C [-40 °F to 248 °F]
Storage temperature
-40 °C to 120 °C [-40 °F to 248 °F]
Humidity
0% to 95% non-condensing
Shock
50 g, 11 ms
Vibration
15 g at 50 Hz to 1000 Hz
Sealing:
dust
moisture or splash1
1
640009M9405
All units sealed against dust
O-ring seals between rotor and housing and cover; epoxy seal between wires and housing and cover.
See Order Guide tables for operating torque differences.
Figure 1. Electrical Taper Diagrams (For reference only.)
Linear: 2.5% to 97.5% (S-1)
Linear: 5% to 95% (S-2)
90
90
80
80
Total Resistance (%)
100
Total Resistance (%)
100
70
60
50
40
30
70
60
50
40
30
20
20
10
10
0
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
0
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
Linear: 360° Quadrature (Q)
100
90
Total Resistance (%)
80
70
60
50
40
30
20
10
0
4
sensing.honeywell.com
0
10 20 30 40 50 60 70 80 90 100
Angular Rotation, Clockwise Left to Right (%)
640 Series
Thru-Shaft Position Sensor
640
Series
Product Nomenclature
Figure 2. General Configuration Guide
For example, 640CS103A06NAAY defines a 640 Series Thru-Shaft Position Sensor, 180° mechanical angle, linear electrical taper, 1 kOhm resistance with a
tolerance of ±15%, 152,4 mm [6 in] leadwire length, no cable connector, 6,35 mm [0.25 in] thru-hole, splash sealing/71 mN m [10 in-oz], approx. operating torque,
complete catalog listing.
640
C
S
Series
Mechanical
Angle
Electrical
Taper
640 Series
Thru-Shaft
Position
Sensor
A
B
C
D
E
S
Z
RZ
Z
330°
312°
180°
106°
103
A
06
N
A
A
Y
Resistance
Resistance
Tolerance
Leadwire
Length
Cable
Connector
ThruHole
Sealing/
Operating Torque
Options
_ _ _ choose from A
1 kOhm to
B
1 MOhm
Reverse log (example:
C
103 = 103 Ohm)
360° quad
D
Linear
from
±15%
Log
±10%
±5%
±2%
90°
angle
00 Right
header
_ _ Length in
Four position
header with
Y polarizing plug,
Berg 65039-033
or equivalent
inches
(example:
06 = 6 in
N No connector
[0.105 in x 0.090 in]
slot
6,35 mm [0.25 in]
B thru-hole with
Splash/
Indicates
complete
A 71 mN m [10 in-oz],
Y catalog
approx.
listing
Moisture/
B 42 mN m [6 in-oz],
Additional
specifications
approx.
X required
5,54 mm [0.218 in]
D-flat
(152,4 mm)
81°, 33°
F CW:
CCW: 48°
6,35 mm [0.25 in]
thru-hole with
A 2,67 mm x 2,87 mm
(contact
Honeywell)
G 360°
Table 640-A Order Guide
Mechanical
Electrical
Mechanical Travel
(Degree)
15
4
170
S-1
180
71 mN m [10 in-oz] dust and moisture
no
640ES103A06NAAY
10 k
15
4
180
S-2
90
71 mN m [10 in-oz] dust and moisture
no
Sealing
RoHS
Compliant
Taper
10 k
Catalog
Listing
Operating Torque
(mN m [in-oz])
Effective Electrical
Travel, approx.
(±%)
640CS103A06NAAY
Resistance
(Ohm)
End Resistance,
max.
(Ohm)
Environmental
Resistance
Tolerance
(±%)
XXXXXX-1-EN
XXXXXX 2014
Copyright © 2014 Honeywell International Inc. All Rights Reserved.
Dimensional Drawing (For reference only: mm [in].)
Rotor shown and midpoint of resistance
45,82
[1.804]
ø6,35
[0.250]
16,51
[0.650]
10,54
[0.415]
2X 8,89
[0.350]
38,10
[1.500]
Schematic
19,05
[0.750]
2X
ø3,99
Red (2)
[0.157]
2,67 X 2,29
[0.090 X 0.105]
Deep slot
39,47
[1.554]
CW (Clock-Wise)
2X
ø16,00
[0.630]
152,4
[6.00]
1 2
Black
Red
3
Cables stripped at
ends for 2,54 [0.100]
White
2X 2°
Draft angle
2X
ø3,96
[0.156]
2X
1,78
[0.070]
8,13
[0.320]
ø7,34
[0.289]
Black (1)
White (3)
ø1,52
[0.060]
2X 18,47
[0.727]
sensing.honeywell.com
5
Thru-Shaft Potentiometers
Table 640-B Order Guide
Mechanical
Mechanical Travel
(Degree)
10
4
170
S-1
360
71 mN m [10 in-oz] dust and moisture
no
640GS103B06NBBY
10 k
10
4
180
S-1
360
71 mN m [10 in-oz]
no
Sealing
RoHS
Compliant
Taper
10 k
Catalog
Listing
Operating Torque
(mN m [in-oz])
Effective Electrical
Travel, approx.
(±%)
640GS103B06NBAY
Resistance
(Ohm)
End Resistance,
max.
(Ohm)
Environmental
Resistance
Tolerance
(±%)
Electrical
dust and splash
Dimensional Drawing (For reference only: mm [in].)
10,54
[0.415]
2X 8,89
[0.350]
Rotor shown and midpoint of resistance
45,82
[1.804]
38,10
[1.500]
2X
16,51
[0.650]
17°
ø6,35
[0.250]
ø3,99
[0.157]
White (2)
39,47
[1.554]
ø16,00
2,36
[0.093]
Schematic
19,05
[0.750]
CW (Clock-Wise)
2X
2X 2°
Draft angle
[0.630]
2X
ø,3,96
[0.156]
2X
ø7,34
[0.289]
ø1,52
Black (1)
Red (3)
[0.060]
152,4
[6.00]
1 2 3
Black
1,78
[0.070]
Cables stripped at
ends for 2,54 [0.100]
White
2X 18,47
[0.727]
8,13
[0.320]
Section A-A
Red
Table 640-C Order Guide
Taper
Mechanical Travel
(Degree)
200
dual 155
Q
360
RoHS
Compliant
Effective Electrical
Travel, approx.
(±%)
15
2.5 k
Sealing
End Resistance,
max.
(Ohm)
640009M9405
Resistance
Tolerance
(±%)
Resistance
(Ohm)
Catalog
Listing
Environmental
Operating
Torque
(mN m [in-oz])
Mechanical
Electrical
71 mN m [10 in-oz] dust and moisture
no
Dimensional Drawing (For reference only: mm [in].)
Rotor shown and midpoint of resistance
45,82
ø6,35 [1.804]
2,67 X 2,29
[0.250]
[0.090 X 0.105]
Deep slot
10,54
[0.415]
2X 8,89
[0.350]
38,10
[1.500]
Schematic
19,05
[0.750]
2X
16,51
[0.650]
[0.157]
CW (Clock-Wise)
39,47
[1.554]
Black (1)
2X
ø16,00
[0.630]
2X 2°
Draft angle
2X
ø3,96
[0.156]
2X
304,8
[12.00]
1 2 3 4 5 6
Black
Red
White
6
Red (2)
ø3,99
Yellow
Green
Blue
sensing.honeywell.com
Cables stripped at
ends for 2,54 [0.100]
1,78
[0.070]
8,13
[0.320]
Section A-A
ø7,34
Green (5)
[0.289]
ø1,52
[0.060]
CW (Clock-Wise)
Blue (4)
2X 18,47
[0.727]
White (3)
Yellow (6)
ADDITIONAL INFORMATION
The following associated literature is available at sensing.honeywell.com:
• Product Line Guide
• Product Range Guide
• Product Installation Instructions
WARNING
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
•
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with each
product.
Failure to comply with these instructions could result in
death or serious injury.
WARRANTY/REMEDY
Find out more
Honeywell serves its customers
through a worldwide network
of sales offices, representatives
and distributors. For application
assistance, current specifications,
pricing or name of the nearest
Authorized Distributor, contact
your local sales office.
To learn more about Honeywell’s
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship. Honeywell’s standard
product warranty applies unless agreed to otherwise by Honeywell
in writing; please refer to your order acknowledgement or consult
your local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items it finds defective. The foregoing is buyer’s sole
remedy and is in lieu of all other warranties, expressed or
implied, including those of merchantability and fitness for
a particular purpose. In no event shall Honeywell be liable
for consequential, special, or indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell website, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
sensing and control products,
call +1-815-235-6847 or
1-800-537-6945,
visit sensing.honeywell.com,
or e-mail inquiries to
info.sc@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
honeywell.com
32301268-A-EN IL50
October 2014
© 2014 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising