Honeywell | Mating Connectors and Cable Assemblies | Datasheet | Honeywell Mating Connectors and Cable Assemblies Datasheet

Honeywell Mating Connectors and Cable Assemblies Datasheet
Cables and
Mating Connectors
Test & Measurement Sensors
DESCRIPTION
Cable assemblies and mating connectors for Honeywell’s
with Honeywell cable assemblies. This datasheet and website
pressure, load and torque catalog products are offered through
configurator will help determine the proper cable assembly for
Honeywell’s online configurator in standard cable lengths of 15
specific product applications.
ft [4.5 m], 50 ft [15.2 m] and 100 ft [30.5 m]. Other lengths are
available by consulting the factory. Mating connectors offered
for pressure, load, and torque sensors are available for general
duty. Honeywell also offers optional connectors for environmental
protection and high temperature applications. Contact
Honeywell to discuss a modification or a custom order to meet a
specific application and/or operating environment.
Honeywell’s default-type cable offer is PVC, with an optional
choice of Teflon®, neoprene, or polyurethane. Other types are
available upon request. Depending on the model and options
Mating connectors are available to connect to pressure, load,
torque, and accelerometer transducer electrical terminations
for general duty, as well as, for environmental protection or high
temperatures. These include, but are not limited to, connectors:
PT06A-10-6A, PC06A-10-6S, MS3106A-14S-6S (SR), MS3106A14S-5S, MS3106A-14S-2S, MS3476L-10-6S, PG9, PG11, and
DP-4S-1.
For special configurations and/or requirements, please contact
Honeywell.
chosen, there are various wiring configurations that can be used
CABLE ASSEMBLY FEATURES
MATING CONNECTOR FEATURES
•
Cable assemblies in 15 ft [4.5 m], 50 ft [15.2 m] and 100 ft
•
MS, PT or PC series types
[30.5 m] lengths of various 3, 4, 5, or 6 conductor cable
•
General duty applications
•
PVC (std.) or teflon, neoprene, polyurethane ( optional)
•
Environmental protection (optional)
•
Cables made with various wiring options that are compatible
•
High temperature (optional)
with several different conductor cables
•
For custom connectors – Contact Honeywell
•
Cable assemblies match directly with both the sensor and
our instrument
•
Custom lengths and configurations – Contact Honeywell
Cables and Mating Connectors
ONLINE
CONFIGURATOR
Honeywell has developed an online configurator for standard
catalog pressure, load
and torque products.
The following pages of
information with Model
cross references to
the CABLE ASSEMBLY
BASE ORDER CODES
and WIRING OPTIONS
can be used when
working with the online
configurator.
A sample of the website’s cable assembly
configurator can be
found to the right.
There is a set of Cable
Assembly Base Order
Codes to first select from
(Model cross references
can be found in this data
sheet). The user is then
walked through a series
of options which include,
range or cable length
choice, type of cable,
a wiring option (model
cross references can be
found in this data sheet),
and finally an option for
secondary termination
choice. Please check out
the Honeywell Test and
Measurement website
(http://measurementsensors.honeywell.com) for
an interactive session .
2 Honeywell • Sensing and Control
Test & Measurement Sensors
BASE ORDER CODE DESCRIPTIONS
Order Code Description
CA301
Cable assembly with Bendix PT Series, straight plug, 6 socket, shell size 10. See datasheet for applicable models
CA302
Cable assembly with Amphenol MS Series, straight plug, 5 socket, shell size 14. See datasheet for applicable models
CA303
Cable assembly with Amphenol MS Series, straight plug, 6 socket, shell size 14. See datasheet for applicable models
CA304
Cable assembly with Bendix PC Series, straight plug, 6 socket, shell size 10. See datasheet for applicable models
CA305
Cable assembly with DIN 43650 straight plug, 4 socket. See datasheet for applicable models
CA306
Cable assembly with Bendix PT Series, straight plug, 10 socket, shell size 12. See datasheet for applicable models
CA307
Cable assembly with Bendix PT Series, straight plug, 8 socket, shell size 12. See datasheet for applicable models
CA308
Cable assembly with Binder 12 socket, KV120. See datasheet for applicable models
CA309
Cable assembly with Amphenol MS Series, 4 socket, shell size 14 for Wing Union Pressure Transducer See datasheet
for applicable models
CA310
Cable assembly with Bendix Receptacle, PT01 Series, 10 socket, shell size 12. See datasheet for applicable models
CA311
Cable assembly with Amphenol MS Series, Wall Mounting (Bulk) Plug, 5 socket, shell size 14. See datasheet for applicable models
CA312
Cable assembly for high temperature with Amphenol MS Series, 6 socket, shell size 10 (MS-3476L-10-6S(SR)). See
datasheet for applicable models
CA313
Cable assembly with DIN 40050 straight plug, 4 socket. See datasheet for applicable models
Honeywell • Sensing and Control
3
Model
Order
code
355
BP313
FP2000
(6n)
FP2000
(6m)
FP2000
(6a)
HP
BP521
Super
TJE
AP111/
AP112
TJE
AP121
Z
AP131/
AP132
Base order code
description for Online
Configurator
415
AP411/
AP412
424
BP424
425
BP425
440
AP415/
AP416
A-105
AP311
A-105a
AP313AP318
A-205
AP312
A-205a
AP314AP316
A-5
AP141/
AP142
AS17A
AP161
AS19G
AP162
DS
AP611AP614
Cable assembly with
Bendix PT Series, straight
plug, 8 socket, shell size
12
CA307
FPA,
FPG,
FPB,
FPV,
FPW
Cable assembly with DIN
40050 straight plug, 4
socket
CA313
Cable assembly with DIN
43650 straight plug, 4
socket
CA305
Cable assembly with
Bendix PT Series, straight
plug, 6 socket, shell size
10
4 Honeywell • Sensing and Control
Cable assembly with
Bendix PT Series, straight
plug, 6 socket, shell size
10
CA301
Cable assembly with
Amphenol MS Series, 4
socket, shell size 14 (MS3106F-14-2S)
CA309
Cable assembly with DIN
43650 straight plug, 4
socket
CA305
Cable assembly with
Bendix PT Series, straight
plug, 6 socket, shell size
10
CA301
Cable assembly with
Bendix PT Series, straight
plug, 6 socket, shell size
10
CA301
7D
7E
7F
7G
7H
7I
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
x
x
CA301
x
x
x
x
x
x
x
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
x
x
x
x
x
x
x
x
x
x
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input
with internal Signature calibration module
(option 53E) or internal TEDS Module
(option 53T).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
7C
(2D, 2E, 2F
or 2G)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Sensor
Reference
Information
7B
(2C 2J or 2T)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
SENSOR OPTIONS â
7A
(2A or 2B)
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Wiring Options for Cable/Online Configurator â
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Cable
assembly
base order code
Cables and Mating Connectors
PRESSURE SENSORS
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
x
x
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Products) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
(2K, 2N or 2Y
& 3D)
Amplified sensor output for 1700 Series
models
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
5
Model
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Sensor
Reference
Information
Order
code
A-5 Low
AD112
x
x
x
x
x
x
Base order code
description for Online
Configurator
A-5 Mid
AD123
x
x
x
x
x
x
A-5 High
BD142
x
x
x
x
x
x
HL-Z
BD511
x
x
x
x
x
x
HL-A-5
BD512
x
x
x
x
x
x
KZ low
AD115
x
x
x
x
x
x
TJE Low
AD114
x
x
x
x
x
x
TJE low,
welded
AD116
x
x
x
x
x
x
TJE Mid
BD121
x
x
x
x
x
x
Z Low
AD111
x
x
x
x
x
x
Z Mid
AD122
x
x
x
x
x
x
Z High
BD141
x
x
x
x
x
x
420
High
AD413
x
420 Mid
AD412
x
420 Low
AD411
x
Cable assembly with
Bendix PT Series, straight
plug, 6 socket, shell size
10
6 Honeywell • Sensing and Control
CA301
7C
7D
7E
7F
7G
7H
7I
(2D, 2E, 2F
or 2G)
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input
with internal Signature calibration module
(option 53E) or internal TEDS Module
(option 53T).
7B
(2C 2J or 2T)
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
SENSOR OPTIONS â
7A
(2A or 2B)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Wiring Options for Cable/Online Configurator â
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
Cable
assembly
base order code
Cables and Mating Connectors
DIFFERENTIAL PRESSURE SENSORS
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Products) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
(2K, 2N or 2Y
& 3D)
Amplified sensor output for 1700 Series
models
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
7
Model
Order
code
41 (7.5K
to 500K
lb)
AL111
43 (7.5K
to 500K
lb)
AL112
45
AL116
47
AL117
73 (7.5K
to 500K
lb)
BL113
75 (7.5
BL114
3108
3108
3124
3124
3127
3127-118
3127
3127-118
3130
3130
3132
3132
3156
3156
3156-133
3156-133
Base order code
description for Online
Configurator
Cable assembly with
Amphenol MS Series,
straight plug, 6 socket,
shell size 14
Cable assembly with
Bendix PC Series,
straight plug, 6 socket,
shell size 10
8 Honeywell • Sensing and Control
Cable assembly with
Amphenol MS Series,
straight plug, 6 socket,
shell size 14
CA303
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
7D
7E
7F
7G
7H
7I
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
Non-amplified sensor with mV/V output
(Sensotec Prod.) and voltage input with internal Signature calibration module (option
53E) or internal TEDS Module (option 53T).
7C
(2D, 2E, 2F
or 2G)
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
x
7B
(2C 2J or 2T)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
CA304
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
CA303
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Sensor
Reference
Information
7A
(2A or 2B)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
SENSOR OPTIONS â
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Wiring Options for Cable/Online Configurator â
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Cable
assembly
base order code
Cables and Mating Connectors
LOAD CELLS
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
x
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
(2K, 2N or 2Y
& 3D)
Amplified sensor output for 1700 Series
models
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
9
Model
Order
code
3161
3161
3167
3167
3170
Series
3173
3336
3397
3663
3174
3175
3336
3397
3419
3419
3632
3632
3663
3719
3719
6443
6443
3129-112
3129-112
3129-121
3129-121
3130-131
3130-131
Base order code
description for Online
Configurator
10 Honeywell • Sensing and Control
3176
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
NA
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Bendix Receptacle,
PT01 Series, 10 socket,
shell size 12
CA310
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
7D
7E
7F
7G
7H
7I
(2A or 2B)
(2C 2J or 2T)
(2D, 2E, 2F
or 2G)
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) and voltage input with internal Signature calibration module (option
53E) or internal TEDS Module (option 53T).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
7C
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Sensor
Reference
Information
7B
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
SENSOR OPTIONS â
7A
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Wiring Options for Cable/Online Configurator â
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Cable
assembly
base order code
Cables and Mating Connectors
LOAD CELLS
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(2K, 2N or 2Y
& 3D)
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
x
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
Amplified sensor output for 1700 Series
models
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
11
Model
3140-P
and
3140-CS
Series
AL-JP
AL-SC
LP
Order
code
3144-P
3145-CS
3145-P
TL121
TL131
AL441
MPB
BL515
RF
AL414AL418
RGF
AL428/
AL628
RGH
AL427/
AL627
RGM
AL426
RH
AL419AL424
RM
AL413AL417
UG
BL122
Base order code
description for Online
Configurator
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
Cable assembly with
Amphenol MS Series,
wall mounting (bulk)
plug, 5 socket, shell
size 14
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
Cable assembly with
Amphenol MS Series,
straight plug, 6 socket,
shell size 14
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
Cable assembly with
Amphenol MS Series,
straight plug, 6 socket,
shell size 14
12 Honeywell • Sensing and Control
CA303
CA301
CA303
7D
7E
7F
7G
7H
7I
(2A or 2B)
(2C 2J or 2T)
(2D, 2E, 2F
or 2G)
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) and voltage input with internal Signature calibration module (option
53E) or internal TEDS Module (option 53T).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
7C
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Sensor
Reference
Information
7B
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
SENSOR OPTIONS â
7A
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Wiring Options for Cable/Online Configurator â
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Cable
assembly
base order code
Cables and Mating Connectors
LOAD CELLS
3143-CS
3143-P
3144-CS
CA301
3146-CS
3146-P
3149-FR
x
CA311
x
CA302
CA301
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(2K, 2N or 2Y
& 3D)
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
Amplified sensor output for 1700 Series
models
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
13
Model
Order
code
1102
1102
1103
1103
1100
Series
1602
1600
Series
1106
1228
1107
1228
1239
1239
1242
1242
1246
1246
1248
1248
1308
1308
1369
1369
1605
1606
1607
1615
1615
1641
1641
1648
1648
Base order code
description for Online
Configurator
14 Honeywell • Sensing and Control
1104
1105
1602
1604
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Bendix PT Series,
straight plug, 8 socket,
shell size 12
CA307
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
7D
7E
7F
7G
7H
7I
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) and voltage input with internal Signature calibration module (option
53E) or internal TEDS Module (option 53T).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
7C
(2D, 2E, 2F
or 2G)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Sensor
Reference
Information
7B
(2C 2J or 2T)
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
SENSOR OPTIONS â
7A
(2A or 2B)
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Wiring Options for Cable/Online Configurator â
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Cable
assembly
base order code
Cables and Mating Connectors
TORQUE TRANSDUCERS
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
Amplified sensor output for 1700 Series
models
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
(2K, 2N or 2Y
& 3D)
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
15
Model
1700
Series
1800
Series
2110
Series
2120
Series
Order
code
1701
1702
1703
1805
1806
1807
2102
2102
2105
2105
2116
2121
2122
2320
2320
2320
2320
2404
2404
1115A
1115A
1115K
1115K
Base order code
description for Online
Configurator
16 Honeywell • Sensing and Control
1700
1706
1804
2110
2111
2112
2113
2114
2115
2124
2125
2126
Cable assembly with
Binder 12 socket,
KV120
CA308
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
7D
7E
7F
7G
7H
7I
(2A or 2B)
(2C 2J or 2T)
(2D, 2E, 2F
or 2G)
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) and voltage input with internal Signature calibration module (option
53E) or internal TEDS Module (option 53T).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
7C
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Sensor
Reference
Information
7B
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
SENSOR OPTIONS â
7A
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
Wiring Options for Cable/Online Configurator â
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Cable
assembly
base order code
Cables and Mating Connectors
TORQUE TRANSDUCERS
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(2K, 2N or 2Y
& 3D)
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
Amplified sensor output for 1700 Series
models
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
17
Model
6400
Series
QFFH-9
QSFK-9
Order
code
1254
Series
1254
1254
Series
1254E
1388-102
1388-102
1815A
1815A
1815K
1815K
2120 Low
2120
6467
6468
6469
BT121
BT111
Base order code
description for Online
Configurator
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
6459
CA306
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
Cable assembly with
Bendix PT Series,
straight plug, 6 socket,
shell size 10
CA301
Cable assembly with
Amphenol MS Series,
straight plug, 5 socket,
shell size 14
CA302
18 Honeywell • Sensing and Control
CA303
7D
7E
7F
7G
7H
7I
(2A or 2B)
(2C 2J or 2T)
(2D, 2E, 2F
or 2G)
(2E & 3D
2F & 3D)
(2K, 2N,
2P, 2Y)
(2U)
(2U &
8A)
(2U &
3D)
(2U & 53E,
53T)
6470
CA301
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2E) or 3
wire, 10 Vdc output and 9 to 32 Vdc input
(option 2F ) and internal remote buffered
shunt calibration for Model FP
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input (for option
2K,2P,2Y) and 9 to 28 Vdc input for intrinsic Safety (option 2N).
Non-amplified with mV/V output (Sensotec
Prod.) & voltage input with internal remote
buffered shunt calibr. (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) and voltage input with internal Signature calibration module (option
53E) or internal TEDS Module (option 53T).
Non-amplified sensor with mV/V output
and voltage input with internal shunt calibration (option 2U & 8A).
Cable assembly with
Bendix PT Series,
straight plug, 10 socket,
shell size 12
7C
Amplified sensor with 3 wire, 5 Vdc output
and 9 to 32 Vdc input (option 2D & 2E)
or 3 wire, 10 Vdc output and 9 to 32 Vdc
input (option 2F or 2G) for Model FP
Sensor
Reference
Information
7B
Amplified sensor with 3 wire, 5 Vdc output
and 11 to 28 Vdc input (option 2C) or 3
wire, 10 Vdc output and 15 Vdc to 28 Vdc
input (option 2T) or 3 wire, 4 to 20 mA
output and 22 to 32 Vdc input (2J) all with
internal shunt calibration or internal remote
buffered shunt calibration.
SENSOR OPTIONS â
7A
Amplified sensor with 4 wire, ±5 Vdc
output and ±15 Vdc or 26 Vdc to 32 Vdc
input (option 2A or 2B) with internal shunt
calibration or internal remote buffered
shunt calibration.
Wiring Options for Cable/Online Configurator â
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input (option 2U).
Cable assembly with
Amphenol MS Series,
straight plug, 6 socket,
shell size 14
Cable
assembly
base order code
Cables and Mating Connectors
TORQUE TRANSDUCERS
x
x
x
x
x
x
7K
7L
7M
7N
7O
7P
7Q
7R
7S
7T
7U
7V
7W
7Y
7Z
7AA
7AB
(2K, 2N or 2Y
& 3D)
(DIN)
(1600)
(1800)
(1700)
(WRC)
(6443)
(1254E)
(1369)
(DS)
(2U/
Sense
Leads)
(2U & 8A/
Sense
Leads)
(2U & 3D/
Sense
Leads)
(2U & 53E,
53T/Sense
Leads)
(WRC/
Sense
Leads)
(6443/
Sense
Leads)
(1254E/
Sense
Leads)
(1369/
Sense
Leads)
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal shunt calibration and Sense Leads
(option 2U & 8A).
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input with
internal remote buffered shunt calibration
and sense leads (option 2U & 3D).
Non-amplified sensor with mV/V output
(Sensotec Prod.) & voltage input with
internal signature calibration mod. (option
53E) or internal TEDS module (option 53T)
and sense leads.
Non-amplified sensor with mV/V output
(Lebow Products) and western regional
wiring code and sense leads (option 2U).
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
6443.
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for 1254
Series models
Non-amplified sensor with mV/V output
and Sense Leads (option 2U) for Model
1369
Amplified sensor with 0 to 5 vdc Analog
output and either RS-232 Digital Output
(option 2Z) or RS-485 Digital Output (option 2AA) for Model DS
Non-amplified sensor with mV/V output
(option 2U) for Model 1369
Non-amplified sensor with mV/V output
(option 2U) for 1254 Series Models
Non-amplified sensor with mV/V output
(option 2U) for Model 6443.
Non-amplified sensor with mV/V output
(Lebow Products) for western regional wiring code (option 2U).
Amplified sensor output for 1700 Series
models
Non-amplified sensor with mV/V output
(option 2U) for 1800 Series models
Non-amplified sensor with mV/V output
(option 2U) for 1600 Series models
Amplified or non-amplified sensor with
mV/V, Voltage or mA output with DIN style
termination (option 6M or 6N).
7J
Non-amplified sensor with mV/V output
(Sensotec Products) and voltage input and
Sense Leads (option 2U).
Amplified sensor with 2 wire, 4 to 20 mA
output and 9 to 32 Vdc input for option 2K
and 2Y or 9 to 28 Vdc input for intrinsic
Safety option 2N with internal remote
buffered shunt calibration.
Test & Measurement Sensors
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Honeywell • Sensing and Control
19
Cables and Mating Connectors
PRESSURE TRANSDUCER MATING CONNECTORS
Mating Connector Options
Service Class “E”
Environmental
Service Class “A”
General Duty (Standard)
Service Class “W”
Weather/Moisture Proofing
Model
Connector Description
Model
Mnf. Part
number
Model
Mnf. Part
number
Model
Mnf. Part
number
Most models
except 440, DS,
424, 425
Bendix straight
plug, PT Series,
6 socket, shell
size 10
023-0107-00
(AA118 order
code)
PT06E-10-6S
023-0032-00
(AA111 order
code)
PT06A-10-6S
023-0124-00
PT06W-10-6S
DS
Bendix straight
plug, PT Series,
8 socket, shell
size 12
023-0036-00 / PT06W-12-8S
440 (mates to
DIN 43650)
DIN straight plug,
4 socket
023-0568-02 (order code AA157) DIN43650 - use with PG11 socket for 6 mm to 10 mm cable
023-0568-03 (order code AA155) DIN43650 - use with 1/2 in NPTF conduit fitting
023-0568-01 (order code AA156) DIN43650 - use with PG9 socket for 4,5 mm to 7,0 mm cable
FP2000
DIN straight plug,
4 socket
023-0546-00 (order code AA161) DIN40050 - use with PG7 socket for 3,5 mm to 6 mm cable
424, 425
Amphenol
straight plug, MS
Series, 4 socket,
shell size 14
023-0768-00 / MS3106F-14-2S
High temperature
Amphenol MS
Series, 6 socket,
shell size 10
023-0528-00 (order code AA151) MS-3476L-10-6S(SR)
20 Honeywell • Sensing and Control
Test & Measurement Sensors
LOAD CELL MATING CONNECTORS
Mating Connector Options
Service Class “E”
Environmental
Service Class “A”
General Duty (Standard)
Service Class “W”
Weather/Moisture Proofing
Model
Connector Description
Model
Mnf. Part
number
Model
Mnf. Part
number
Model
Mnf. Part
number
45
47
Bendix straight
plug, PC Series,
6 socket, shell
size 10
–
–
023-0092-00
(AA162 order
code)
PC06A-10-6S
023-LW181-014
PC06W-10-6S
41 & 43 (5 to 5K
lb); 73 & 75 (50
to 2K lb); RM,
RH, RF (2K to
50K lb); RGM,
RGH, RGF, LP,
3132, 3397,
3108, 3140,
3170, 3632,
3161
Bendix straight
plug, PT Series,
6 socket, shell
size 10
023-0107-00
(AA118 order
code)
PT06E-10-6S
023-0032-00
(AA111 order
code)
PT06A-10-6S
023-0124-00
PT06W-10-6S
3663
Bendix receptacle, PT01 Series,
10 socket, shell
size 12
023-LW180-103
PT01E-12-10S
(SR)
–
–
023-LW180-017
PT01W-12-10S
41 & 43 (7.5K to
500K lb); 73 &
75 (3K to 200K
lb); RF, RM, RH
(75K to 200K
lbs);
UG, MPB
Amphenol
straight plug, MS
Series, 6 socket,
shell size 14
023-0161-00
MS3106E-14S6S
023-0046-00
(AA121 order
code)
MS3106A-14S6S
–
–
3124, 3336,
3719, AL-SC,
3127, 3156,
3129, 3130,
Amphenol
straight plug, MS
Series, 5 socket,
shell size 14
023-1247-00
MS3106E-14S5S
023-LW180-038
MS3106A-14S5S
–
–
AL-JP
Amphenol Wall
Mounting (Bulk)
Plug, MS Series,
5 socket, shell
size 14
023-1060-00
MS3102E-14S5S
023-0056-00
MS3101A-14S5S
–
–
6443
Amphenol 90
Degree Plug, MS
Series, 5 socket,
shell size 14
–
–
023-LW180-068
MS3108B-14S5S
–
–
023-0528-00
(AA151 order
code)
MS-3476L-106S (SR)
High temperature
Amphenol MS
Series, 6 socket,
shell size 10
Honeywell • Sensing and Control
21
Cables and Mating Connectors
TORQUE TRANSDUCER MATING CONNECTORS
Mating Connector Options
Service Class “E”
Environmental
Service Class “A”
General Duty (Standard)
Service Class “W”
Weather/Moisture Proofing
Model
Connector Description
Model
Mnf. Part
number
Model
Mnf. Part
number
Model
Mnf. Part
number
QFFH-9, 1102,
1103, 1246,
1388-102, 2105,
2120 Low, 6118
Bendix straight
plug, PT Series,
6 socket, shell
size 10
023-0107-00
(AA118 order
code)
PT06E-10-6S
023-0032-00
(AA111 order
code)
PT06A-10-6S
023-0124-00
PT06W-10-6S
1254 and 1254E
Series
Bendix straight
plug, P Series,
10 socket, shell
size 12
023-LW181-108
PT06E-12-10S
(SR)
–
–
–
–
1369
Bendix straight
plug, PT Series,
8 socket, shell
size 12
–
–
–
–
023-LW181-037
PT06W-12-8S
QSKF-9
Amphenol
Straight Plug, MS
Series, 6 socket,
shell size 14
023-0161-00
MS3106E-14S8S
023-0046-00
(AA121 order
code)
MS3106A-14S6S
–
–
1100, 1600,
1602, 1800,
2102, 2110,
2120, 1228,
1248, 1641,
1648, 2404,
2320, 1308,
1242, 1239,
1115, 1615,
1815, 6459,
6467, 6468,
6470, 6105,
6116, 6129,
1388-124
Amphenol
straight plug, MS
Series, 5 socket,
shell size 14
023-1247-00
MS3106E-14S5S
023-LW180-038
MS3106A-14S5S
–
–
1700 Series
Binder 12 socket
023-LW185-027 binder
22 Honeywell • Sensing and Control
Test & Measurement Sensors
ACCELEROMETER MATING CONNECTORS
Order Code Part Number
Description
AA141
023-0076-00
Microtec DP straight plug, four
socket, general duty (DP-4S-1)
AA174
023-0466-00
Bendix MS Series straight plug,
three socket, shell size 10 connector
(MS3106F-10SL-3S)
MH002
031-0428-00
2-pin MS type for MA11, MA12, and
MAV51
MH008
032-1197-00
3-pin 62 GB for MA15, MAT53, and
MAV52
CA067
031-0446-00
BNC plug with strain relief
CA054
031-0487-00
BNC bulkhead socket and dust cap
fitted in 90° bracket, fitted to cable
ACCEL MATING CONNECTOR – CABLE ASSEMBLY
TORQUE PASSIVE SPEED SENSOR PICKUP CABLE
ASSEMBLY
Order Code
Description
7204-00-15
15 feet
7204-00-50
50 feet
7204-00-100
100 feet
7204-16-15
15 feet with connector for Model 7541
7204-16-50
50 feet with connector for Model 7541
7204-16-100
100 feet with connector for Model 7541
TORQUE ZERO VELOCITY, ACTIVE SPEED PICKUP
CABLE ASSEMBLY
Order Code
Description
7220-47-15
15 feet
7220-47-50
50 feet
Order Code Part Number
Description
7220-47-100
100 feet
AA143
060-0436-04
Cable assembly, Microtec-type connector, 15 ft of Teflon® cable for JTF
7220-119-15
15 feet with connector for Model 7541
CA051
032-1399-00
Cable assembly, microdot to microdot, 15 ft of PVC cable for MAQ13,
MAQ36, and MAQ41
7220-119-50
50 feet with connector for Model 7541
7220-119-100
100 feet with connector for Model 7541
CA338
032-1397-00
Cable assembly, microdot to microdot, 15 ft of PTFE cable for MAQ13,
MAQ36, and MAQ41
CA137
032-1396-00
Cable assembly, 5 meters of twin
core PTFE cable with stainless steel
overbraid for MA15, MAT53, and
MAV53
CA053
031-0439-01
Cable assembly, 5 meters of twin
core PTFE cable with stainless steel
overbraid for MA11, MA12, and
MAV51
RF CABLE ASSEMBLY
Order Code
Description
043-LW525-034-LF
RF cable assembly to TMS9000, 92000 Series,
17,37 m [57 ft] BNC-BNC
043-1529-01
RF cable assembly to TMS9000, 94000 Series,
14,6 m [47.9 ft], tri-axial
For custom lengths or configurations – contact Honeywell
INSTRUMENT MATING CONNECTORS
INSTRUMENT CABLE ASSEMBLIES
Order code
Description
Order code
Description
AA176
Mating connector adapter, 9 pin male to 25 pin
male
AA154
Power cable and connector for GM family
AA168
Molded 25-pin male/female communications
cable
Honeywell • Sensing and Control
23
Cables and Mating Connectors
Test and Measurement Sensors
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
WARNING
Honeywell serves its customers
MISUSE OF DOCUMENTATION
through a worldwide network of
• The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
sales offices, representatives
and distributors. For application
assistance, current specifications, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
Failure to comply with these instructions could result in
death or serious injury.
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
info.tm@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
008865-1-EN IL50 GLO Printed in USA.
October 2010
Copyright © 2010 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising