Honeywell | MICRO SWITCH AML76 Series Pushbutton Guard | Datasheet | Honeywell MICRO SWITCH AML76 Series Pushbutton Guard Datasheet

Honeywell MICRO SWITCH AML76 Series Pushbutton Guard Datasheet
AML76 Series
Switch Guard/Cover
Honeywell’s AML76 Series switch guard protects square and
rectangular 0.19-inch standard height pushbuttons from inadvertent actuation. It is for use with standard bezel type switches
The switch guard’s cover is clear, polycarbonate thermoplastic through which the button is easily visible. The word “lift” is
molded onto the top front edge of the guard. The bracket is
bright-finished stainless steel.
The switch guard may be assembled to the AML pushbutton
before the switch is installed in a panel. Or, the guard can be assembled to a pushbutton already mounted in a panel, providing
the wiring is sufficiently slack to raise the switch bezel above the
panel, and if there is sufficient clearance with adjacent units. It
may be mounted in both horizontal and vertical matrices. A wire
lock-down feature, using 0.020 inch diameter locking wire, may
be used as an additional protection.
Manual operations, including control boards and panels in
Industrial and test equipment
Computer mainframes and peripherals
Process control
Medical instrumentation
Button cannot be operated when switch guard cover is
closed, preventing accidential operation
Wire lock-down feature further prevents unintentional actuation of the switch
Lamps can be replaced with the switch guard attached,
without special tools, saving time and maintenance
Can be used with alternate or momentary action square or
rectangular 0.19-inch standard height AML buttons
Shock-resistant construction for long, maintenance-free life
AML76 Series
Part number
AML76 Series square switch guard/cover
AML76 Series rectangular switch guard/cover
Note: The AMl76F10T01P cannot be used with the following AML rocker series: AML14, AML16, AML24, and AML26.
2 Honeywell • Sensing and Control
AML76 Series
Switch Guard/Cover
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
• The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
DO NOT USE these products as safety or emergency stop
devices or in any other application where failure of the product
could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
and distributors. For application
assistance, current specifications, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
sensing and control products,
call +1-815-235-6847/
1-800-537-6945, visit,
or e-mail inquiries to
Sensing and Control
1985 Douglas Drive North
Golden Valley, MN 55422 USA
005426-1-EN IL50 GLO
December 2012
Copyright © 2012 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF