Model 2320 Hollow Reaction Torque Sensor DESCRIPTION Model 2320 hollow reaction torque sensor is designed for hous- These models have no moving parts and utilize four bonded ing reaction force measurement in mixing, hydraulic pump, strain gages on a special machined portion of the transducer to and motor test applications. These models operate and are achieve a maximum non-linearity of 0.1% over a wide dynamic calibrated in both directions. Nickel-plated alloy steel con- range. 12000 in-lb to 36000 in-lb capacities. struction enhances durability in harsh, industrial environments. FEATURES • 12000 in-lb to 36000 in-lb capacities • 0.1 % non-linearity and hysteresis • High torsional stiffness • High resistance to bending moments • Low-end sensitivity due to absence of moving parts Safety considerations: It would be unsafe to operate Honeywell torque sensors and load cells beyond static overload or ultimate extraneous load limits as defined in the glossary of terms or, when applicable, higher than maximum speed. When in doubt, consult factory. Honeywell is not responsible for any property damage or personal injury which may result because of the misapplication of the transducer. Model 2320 MS-3102E-145-5P PERFORMANCE SPECIFICATIONS TYPICAL SYSTEM DIAGRAM Characteristic Measure Torque range 12000, 36000 lb-in Non-linearity ±0.1 % of rated output Hysteresis ±0.1 % of rated output Repeatability ±0.05 % of rated output Output @ rated capacity 2 mV/V (nominal) Customer Supplied Chart Recorder Alarm Panel Data Acquisition Computer PLC In-Line Amplifiers ØG ØD (Used with unamplified units only) ØG H N C Output Amplifier Universal In-Line Amplifiers +/-5 VDC UV H +/-10 VDC UV-10 0 +/-5 VDC UBP 4-20mA (3 wire) U3W 4-20mA (2 wire) U2W DIN rail Mount In-Line Amplifiers 0 +/-N5 VDC (3 wire) DV-05 4-20mA (3 wire) DA-05 0 +/- 10 VDC (3 wire) DV10 Honeywell For long cable runs or electrically noisy environments an amplified sensor or locally mounted amplifier is often preferred ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -54 °C to 93 °C [-65 °F to 200 °F] Temperature, compensated 21 °C to 77 °C [70 °F to 170 °F] Temperature effect, zero ±0.002 %/of rated output °F Temperature effect, output ±0.002 %/of reading °F Power Supply In-Line Amplifier Output Input Serial Number Display Units MODEL 2320 SC500 SC2001 GM 7541 SC1000 SC3004 NK 7558 SC2000 HH 7561-PSD 2003.1 lb. L1 L2 L3 L4 ØJ ELECTRICAL SPECIFICATIONS Characteristic Measure Excitation (maximum) 20 Vdc or Vac RMS Insulation resistance > 5000 mOhm @ 50 Vdc Bridge resistance 350 ohm (nominal) Number of bridges 1 Zero balance ±1.0 % of rated output VALUE CLEAR UP DOWN SETUP CHAN TARE ENTER EXIT Mating Connectors & Cables ØF B.C. 064-LW13621 Mating Connector 7200-76-XX* Mating connector & 6 conductor cable (unamplified unit with sense leads but not shunt cal) 7200-75-XX** Mating connector & 4 conductor cable (unamplified unit without sense leads but not shunt cal) 7200-111-XX* Mating connector & 6 conductor cable (for connection to instrument 7541) 7200-110-XX** Mating connector & 4 conductor cable (for connection to instrument 7541) * XX represents length in feet ** XX represents length in feet 100ft maximum 20ft maximum Load carrying capacity S S P P W W MODEL 2110 2 Honeywell • Sensing and Control W - weight W x S - overhung moment MODEL S - distance to 2404 W Do not exceed moment (W x S) or shear (W), whichever value is attained first P = thrust Hollow Reaction Torque Sensor MECHANICAL SPECIFICATIONS Model Capacity Nm [lb-in] Overload Nm [lb-in] Torsional stiffness Nm/rad [lb-in/rad] Max. overhung moment WxS Nm [lb-in] Max. shear W N [lb] Max. thrust P N [lb] 2320-12K 1350  2030  677875  676  6672  26688  2320-36K 4050  6085  3389376  1694  13344  66720  MOUNTING DIMENSIONS For reference only Honeywell • Sensing and Control 3 Model 2320 Hollow Reaction Torque Sensor Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to email@example.com WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008800-1-EN IL50 GLO June 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project