Honeywell | A-5 High Differential Pressure Transducer | Datasheet | Honeywell A-5 High Differential Pressure Transducer Datasheet

Honeywell A-5 High Differential Pressure Transducer Datasheet
Model A-5
High Range Wet/Wet Differential
Pressure Transducer
DESCRIPTION
The A-5 high range Wet/Wet transducers are engineered to mea-
A variety of standard options are available with the Model A-5 in-
sure differential pressures as great as 10k psid and achieves
cluding choice of pressure adaptors, alternative pressure ports,
accuracy of 0.5 % full scale. Each series is bi-directional and
internal amplifiers options, and electrical terminations.
accepts fluid in both ports. 17-4 PH stainless steel ensures durability of these bonded foil strain gage units under harsh industrial
conditions.
FEATURES
•
0.5% accuracy
•
2000 psid to 10000 psid
•
mV/V (standard), 4 mA to 20 mA, 0 Vdc to 5 Vdc, or 0 Vdc
to 10 Vdc output
•
Intrinsically safe available (2N option only)10
•
CE approved11
Model A-5
PERFORMANCE SPECIFICATIONS
Characteristic
Measure
Pressure ranges
2000, 3000, 5000, 7500, 10000 psid
Accuracy
±0.5 % full scale
Linearity
±0.25 % full scale (typical)
Hysteresis
±0.13 % full scale (typical)
Non-repeatability
±0.07 % full scale (typical)
Output (standard)
2 mV/V (nominal)
Line pressure
2000 psi
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
OPTION CODES
Range Code
Pressure
ranges (psid)
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
2000, 3000, 5000, 7500, 10000
Temperature
compensation
1a. 60 °F to 160 °F
1b. 30 °F to 130 °F
1c. 0 °F to 185 °F
1d. -20 °F to 130 °F
1e. -20 °F to 200 °F
1f. 70 °F to 250 °F
1i. -65 °F to 250 °F
1j. 0 °C to 50 °C
1m. -25 °C to 110 °C
1g. 70 °F to 325 °F
1h. 70 °F to 400 °F
Internal
amplifiers
2u. Unamplified,
mV/V output
2b. 4 wire ±5 Vdc
2c. 0 Vdc to 5 Vdc
2j. 4 mA to 20 mA
(3-wire) output
2k. 4 mA to 20 mA
(two-wire) output12
2n. (2N) 4 mA to
20 mA (two-wire)
intrinsically safe12
2t. 0 Vdc to 10 Vdc
Characteristic
Measure
Temperature, operating
-54 °C to 121 °C [-65 °F to 250 °F]
Temperature, compensated
15 °C to 71 °C [60 °F to 160 °F]
Temperature, effect, zero
±0.75 % full scale/100 °F
Internal amp
enhancements
3a. Input/output isolation6
3d. Remote buffered shunt calibration
Temperature, effect, span
±1.0 % reading/100 °F
Pressure ports5
5a. 1/4-18 NPT female
5c. 7/16-20 UNF female
Electrical
termination
6a. Bendix PTIH-10-6P
(or equiv.) 6 pin
(max. 120 °C)
6b. MS type connector 1
6e. Integral cable:
Teflon (-54 °C to
245 °C)
6f. Integral cable: PVC
(-30 °C to 70 °C)
6g. Integral cable:
Neoprene (-20 °C
to 80 °C)1
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Strain gage type
Bonded foil
Excitation (calibration)
10 Vdc
Bridge resistance
350 ohm (nominal)
Shunt calibration data
Included
Elec. termination (std)
PTIH-10-6P or equivalent (hermetic stainless)
Mating connector (not incl.)
PT06A-10-6S or equiv. (AA111)
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Media
Gas, liquid
Overload-safe
2000 psid to 3000 psid
6h. Integral cable:
Silicone (-54 °C to
150 °C)
6i. Integral underwater
cable (8m [26 ft])
(max. 80°C)1
6j. 1/2-14 conduit fitting with 1,5 m [5 ft]
of 4 conductor PVC
cable
Shunt calibration 8a. Precision internal resistor7
Special
calibration
9a. 10 point (5 up/5 down) 20% increments @ 20 °C
9b. 20 point (10 up/10 down) 10% increments @ 20 °C
100% over capacity
Wetted
diaphragm
17-4 PH stainless steel
Overload-safe
5000 psid to 10000 psid
50% over capacity
Bridge type
Pressure port
1/4-18 NPT female (2)
11a. Square bridge
11c. Square & symmetrical bridge
11b. Symmetrical bridge
Wetted parts material
17-4 PH stainless steel
Case material
Stainless steel
Zero and
span adjustment
14b. Top access to pots8
14a. No access to pots
O ring seals
26a. Metal
Interfaces
53e. Signature calibration
53t. TEDS IEEE 1451.4 module9
2 Honeywell • Sensing and Control
High Range Wet/Wet Differential Pressure Transducer
INTERNAL AMPLIFIERS
Voltage output: Option 2b
Voltage output: Option 2c
Voltage output: Option 2t
Current threewire: Option 2j
Current twowire: Option
2k
Intrinsically
safe amp: Option 2n (2N)***
Output signal
±5 V
0 V to 5 V or
±5 V @ 5 mA
0 V to 10 V or
±10 V @ 5 mA
4 mA to 20 mA
4 mA to 20 mA
4 mA to 20 mA
Input power (voltage)
±15 V or 26 Vdc
to 32 Vdc
11 Vdc to 28 Vdc
15 Vdc to 28 Vdc
22 Vdc to 32 Vdc
9 Vdc to
32 Vdc
9 Vdc to
28 Vdc
Input power (current)
45 mA
40 mA
40 mA
65 mA
4 mA to 28 mA
4 mA to 24 mA
Freq. response (amp)
3000 Hz
3000 Hz
3000 Hz
2500 Hz
300 Hz
2000 Hz
Power supply rejection
60 db
60 db
60 db
60 db
60 db
60 db
Operating temperature
-20 °F to 185 °F
-20 °F to 185 °F
-20 °F to 185 °F
0 °F to 185 °F
0 °F to 185 °F
-20 °F to 185 °F
Reverse volt. protection
Yes
Yes
Yes
Yes
Yes
Yes
Short circuit protection
Momentary
Momentary
Momentary
Yes
Yes
Yes
Wiring code: connector
(std)2
A (+) Supply
B Output common
C Supply return
D (+) Output
E Shunt cal 1
F Shunt cal 2
A (+) Supply
B Output common**
C Supply return **
D (+) Output
E Shunt cal 1
F Shunt cal 2
A (+) Supply
B Output common**
C Supply return**
D (+) Output
E Shunt cal 1
F Shunt cal 2
A (+) Supply
B Output common**
C Supply return**
D (+) Output
E Shunt cal 1
F Shunt cal 2
A (+) Supply
B No connection
C No connection
D (+) Output
E Case ground
F No connection
A (+) Supply
B No connection
C No connection
D (+) Output
E Case ground
F No connection
Wiring code: cable2,3,4
R (+) Supply
Bl Output common
G Supply return
W (+) Output
B Shunt cal 1
Br Shunt cal 2
R (+) Supply
Bl Output common*
G Supply return*
W (+) Output
B Shunt cal 1
Br Shunt cal 2
R (+) Supply
Bl Output common*
G Supply return*
W (+) Output
B Shunt cal 1
Br Shunt cal 2
R (+) Supply
Bl Output common*
G Supply return*
W (+) Output
B Shunt cal 1
Br Shunt cal 2
R (+) Supply
Bl (+) Output
W Case ground
R (+) Supply
Bl (+) Output
W Case ground
Amplifier
specifications
* Black and green wires are internally connected.
** Pins B and C are internally connected.
*** See Honeywell’s Web site for the most up-to-date information regarding Intrinsically safe approvals, ref #008-0547-00.
Typical system diagram
Mounting dimensions and characteristics
1/4-18 NPT female
2X
For reference only
NOT TO SCALE
Honeywell • Sensing and Control
3
Model A-5
High Range Wet/Wet Differential Pressure Transducer
RANGE CODES
Range Code
Available ranges
DL
±2000 psid
DN
±3000 psid
DR
±5000 psid
DT
±7500 psid
DV
±10000 psid
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
WIRING CODES
Connector
Unamplified
A, B
(+) excitation
C, D
(-) excitation
E
(-) output
F
(+) output
NOTES
1.
2.
Availability varies according to range.
Interconnecting shunt cal. 1 terminal with shunt cal. 2 terminal provides 50% (unamplified units), 75% (4 mA to 20 mA 3-wire units) or
80% (voltage amplified units of full scale output for quick calibration.
Shunt calibration comes standard with internal amplifier options 2b,
2c, 2t and 2j.)
3. O=Orange, Y=Yellow, B=Blue, Bl=Black, R=Red, Br=Brown,
W=White, G=Green. Color specifying cable and number or letter
specifying connector.
4. No mating connector necessary for cable option.
5. Some pressure port options may require axial orientation.
6. Only available with unamplified option 2u.
7. Only available with amplified options.
8. Only available with Vdc output options 2b, 2c.
9. Consult factory for TEDS availability with amplified models.
10. Range dependent; consult factory. Termination dependent; consult
factory.
11. Internal amp and termination dependent; consult factory.
12. 5000 ohm bridge required.
Note: Unless otherwise specified on order, amplified units with 4 mA
to 20 mA output will provide 4 mA at 0 psid and 20 mA at positive full
scale and the unit will not operate in the negative direction. An available
alternative is to specify 4 mA at negative full scale and 20 mA at positive
full scale. All amps add 2 in to amplifier housing.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008719-1-EN IL50 GLO
May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising