Model MAT53 Accelerometer DESCRIPTION The Model MAT53 amplified piezoelectric accelerometers com- base, resulting in a low base strain sensitivity. The stainless steel bined with integrated temperature sensors are designed to be materials are non-magnetic resulting in very low magnetic field used in Industrial test and automation environments; including susceptibility. These features, together with a sealed body, as- laboratory test, modal studies and testing cells where simul- sure accurate and reliable data. The Model MAT53 is available in taneous temperature and velocity vibration are required to be a number of configurations and options that includes connector measured. The constant current low output impedance for the or integral stainless steel armored cable (specify length at time velocity vibration combined with the current output for the tem- of ordering), The Model MAT53 can be supplied in a number of perature output provide the ability to drive high load capacitance different dynamic ranges to suit the expected temperature and allows long runs of low cost cable without degradation of data. vibration levels. The seismic element is mechanically isolated from the mounting FEATURES • Temperature and vibration dual output • 2 Hz to 10 kHz usable frequency range • IEPE output • Low base strain sensitivity • Current O/P for temperature • Stainless steel overbraided PTFE cable • Stainless steel armored cable or three-pin connector electrical options Model MAT53 PERFORMANCE SPECIFICATIONS WIRING CODES Characteristic Measure AG930 Dynamic range ±80 G Pin A (+) Supply (+) Output Sensitivity 100 mV/G ±10 % Pin B Supply return Temperature range -18 °C to 93 °C [0 °F to 200 °F] Pin C (+) Temperature Transverse sensitivity Less than 5 % Temperature sensitivity 10 mV/°F AG931 Frequency range 2 Hz to 10 kHz ±5 % White (+) Supply (+) Output Amplitude linearity Better than 1 % linearity Black (+) Temperature 18 kHz Shield Supply return Mounted base resonance ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -12 °C to 138 °C [-10 °F to 280 °F] Sealing IP67/NEMA 4 ELECTRICAL SPECIFICATIONS Characteristic Measure Input Constant current Current range 0.5 mA to 8 mA Bias voltage 12 Vdc Cable Stainless steel overbraided PTFE Standard cable length1 4,9 m [16 ft] Electrical noise 0.3 mG max. 1 Isolation Base isolated Mating connector MH008 2 MECHANICAL SPECIFICATIONS Characteristic Measure Weight 0,11 kg [3.8 oz] Material Stainless steel Mounting torque 6 ft-lb SENSITIVITY CODES Sensitivity Code Sensitivity GU 10 mV/G GB 30 mV/G GH 100 mV/G GG 1000 mV/G 2 Honeywell • Sensing and Control OPTION CODES Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. Sensitivity 10 mV/G, 30 mV/G, 100 mV/G , 1000 mV/G Electrical termination 3-pin 62 GB connector2 Cable1 (specify cable length at time or order) Mounting arrangement 17b. 1/4-28 UNF 17c. Quickfit female Model MAT53 NOTES 1. Not applicable for AG930. 2. Not applicable for AG931. MOUNTING DIMENSIONS Accelerometer Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to firstname.lastname@example.org WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008734-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project