Honeywell | MAV52 Accelerometer | Datasheet | Honeywell MAV52 Accelerometer Datasheet

Honeywell MAV52 Accelerometer Datasheet
Model MAV52
Accelerometer
DESCRIPTION
The SENSOTEC Model MAV52 amplified piezoelectric ac-
base, resulting in a low base strain sensitivity. The stainless steel
celerometers with velocity output are designed to be used in
materials are non-magnetic resulting in very low magnetic field
Industrial test and automation environments; including labora-
susceptibility. These features, together with asealed body, as-
tory testing, modal studies and test cells. The MAV52 is ideal
sure accurate and reliable data. The model MAV52 is available in
for applications where velocity content of vibration is a more
a number of configurations and options that includes connector
meaningful parameter to measure and where noise issues or
or integral stainless steel armored cable (specify length at time
system simplicity makes integration of the acceleration signal
of ordering), intrinsically safe option or a submersible format.
in the sensor rather than the signal conditioningmore attractive.
The mounting hole can be supplied with different threads. The
The 4 mA to 20 mA output makes it ideal in applications where
Model MAV52 can be supplied in a number of different sensitiv-
noise, cable losses and long cable runs are likely to be an issue.
ites to suit the expected vibration levels for the application.
The seismic element is mechanically isolated from the mounting
FEATURES
•
Velocity measurement
•
2 Hz to 10 kHz usable frequency range
•
4 mA to 20 mA proportional to velocity
•
Submersible option
Model MAV52
PERFORMANCE SPECIFICATIONS
WIRING CODES
Characteristic
Measure
AG928
Dynamic range
50 G
Pin A
(+) ve Accel.
Sensitivity
25,4 mm/s for 4 mA to 20 mA
Pin B
No connection
Transverse sensitivity
Less than 5 %
Pin C
0V
Temperature sensitivity
0.145/°F
Frequency range
2 Hz to 1 kHz ±10 %
AG929
Amplitude linearity
Better than 1 % linearity
Red
(+) Supply
Mounted base resonance
5 kHz
Blue
(+) Output
Shield
Case ground
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-23 °C to 99 °C [-10 °F to 210 °F]
Sealing, AG928 and AG932
IP67/NEMA 4
Sealing, AG929
IP68/NEMA 4x
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Input
Voltage
Output
4 mA to 20 mA
Supply voltage
12 V to 32 V
Current range
0.5 mA to 8 mA
Bias voltage
12 Vdc
Cable2 , AG932
Stainless steel armored PTFE
Cable , AG929
PU
Standard cable length2
4,9 m [16 ft]
Electrical noise
0.3 mG max.
Isolation
Base isolated
Mating connector1
MH008
2
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Weight
0,14 kg [5 oz]
Material
Stainless steel
Mounting torque
6 ft-lb
RANGE CODES
Range Code
Range
SA
12,7 mm/s RMS
SB
25,4 mm/s RMS
SC
50,8 mm/s RMS
SD
101,6 mm/s RMS
2 Honeywell • Sensing and Control
AG932
White
(+) Supply
Black
(+) Output
Shield
Case ground
OPTION CODES
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Sensitivity
12,7 mm/s RMS; 25,4 mm/s RMS ; 50,8 mm/s
RMS; 101,6 mm/s RMS
Electrical
termination
3-pin 62 GB connector1
Cable length2 (specify cable length at time of
order)
Mounting
arrangement
17b. 1/4-28 UNF
17c. Quickfit female
MOUNTING DIMENSIONS
Model MAV52
NOTES
1. Only available with AG928.
2. Only available with AG929 and AG932.
TYPICAL SYSTEM DIAGRAM
Accelerometer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008733-1-EN IL50 GLO
May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising