Honeywell | MS7A AC-AC Submersible LVDT | Datasheet | Honeywell MS7A AC-AC Submersible LVDT Datasheet

Honeywell MS7A AC-AC Submersible LVDT Datasheet
Model MS7A AC-AC
Submersible* Displacement Transducer
DESCRIPTION
Model MS7A submersible displacement transducer is en-
cables and a waterproof outer jacket are hermetically sealed to
gineered for rugged industrial applications which require a
the transducer to allow for submersion in most liquids and cor-
waterproof transducer. This stainless steel unit is designed with
rosive fluids. These models can withstand external pressures to
permanently attached, waterproof connecting cable. Connecting
250 psi.
FEATURES
•
±0.25 % non-linearity
•
Submersible
•
Withstands 250 psi, external pressure
•
Stainless steel construction
•
±1,02 mm to 12,7 mm [±0.04 to ± 0.50 in range]
•
-4 °F to 257 °F operating range (standard)
•
Enhanced immunity to electrical noise
•
Captive guided spring return armature
•
Hermetically sealed, waterproof cable 1.83 m [6 ft]
•
Easy to operate
•
Infinite resolution
•
Not RoHS compliant
Model MS7A AC-AC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±1,02 mm to 12,7 mm [±0.04 in to 0.50
in]
HK
±1,02 mm [±0.04 in]
HM
±2,54 mm [±0.10 in]
HN
±5,08 mm [±0.20 in]
HF
±7,62 mm [±0.30 in]
HG
±10,16 mm [±0.40 in]
HP
±12,7 mm [±0.50 in]
Non-linearity (max.)
±0.25 % full scale
Non-repeatability
<10 microinches
Output sensitivity
2 mV/V/ 0.001 in
Output load
100000 ohm
Resolution
Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-20 °C to 125 °C [-4 °F to 257 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Temperature effect, span
(max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
ac-ac displacement transducer
Input supply (calibrated)
5 V RMS @ 5 kHz
Input supply (acceptable)
1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination
Hermetically sealed waterproof cable
1.83 m [6ft]
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Free unguided
Probe thread
M3 X 0.5
2 Honeywell • Sensing and Control
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±1,02 mm to 12,7 mm [±0.04 in to ±0.5 in]
Electrical
termination
Hermetically sealed waterproof cable (1,83 m
[6 ft])
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
Range
code
Available
stroke range
mm [in]
L
mm [in]
D
mm [in]
X **
mm [in]
D1
mm [in]
Total weight***
g [oz]
Armature
weight
g [oz]
HK
±1,02 [±0.04]
40,89 [1.61]
8,00 [0.315]
16,99 [0.669]
2,34 [0.092]
25,51 [0.90]
3,69 [0.13]
HM
±2,54 [±0.1]
46,99 [1.85]
9,53 [0.375]
17,98 [0.708]
2,34 [0.092]
28,35 [1.00]
5,67 [0.20]
HN
±5,08 [±0.2]
50,29 [1.98]
9,53 [0.375]
22,86 [0.900]
2,34 [0.092]
32,60 [1.15]
7,09 [0.25]
HF
±7,62 [±0.3]
69,85 [2.75]
9,53 [0.375]
29,21 [1.150]
2,34 [0.092]
45,35 [1.60]
9,92 [0.35]
HG
±10,16 [±0.4]
73,91 [2.91]
9,53 [0.375]
32,51 [1.280]
2,34 [0.092]
48,19 [1.70]
10,49 [0.37]
HP
±12,7 [±0.5]
89,91 [3.54]
9,53 [0.375]
34,93 [1.375]
2,34 [0.092]
59,53 [2.10]
12,76 [0.45]
WIRING CODES
TYPICAL SYSTEM DIAGRAM
Supply
Supply (calibrated @ 5 V RMS, 5 kHz)
Yellow
Supply return
Blue
Output
Green
Output return
Black
Secondary center tap (normally not connected)
Cable shield is not connected to transducer
5
For reference only
Wire color
Red
Honeywell • Sensing and Control 3
Model MS7A AC-AC
NOTES
* Not recommended for salt water use
** Dimensions at “X” at nominal electrical zero
*** Excluding cable
Submersible* Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit
www.honeywell.com/sensing or call +1-815-235-6847
Email inquiries to info.sc@honeywell.com
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
WARNING
MISUSE OF DOCUMENTATION
• The information presented in this catalogue is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008742-1-EN IL50 GLO
May 2008
Copyright © 2008 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising