Model QSFK-9 Shaft Reaction Torque Transducer DESCRIPTION Model QSFK-9 shaft reaction torque transducer is designed for els have no moving parts and utilize four bonded strain gages installation between test pieces such as motors, switches, axles on a special machined portion of the transducer to achieve a or shafts and their mounting plate. These models operate and maximum non-linearity of 0.1% over a wide dynamic range. are calibrated in both directions. Stainless steel construction en- Typical applications include tire braking, motor dynamometers, hances durability in harsh, industrial environments. These mod- friction-skid testing, and twist measurement. FEATURES • 100 in-lb to 24000 in-lb • 0.1 % non-linearity and hysteresis • Wide dynamic range • High frequency response • Stainless steel Model QSFK-9 PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range Code Available ranges Range 100 in-lb to 24000 in-lb TJ 100 in-lb System accuracy ±0.1 % full scale TL 300 in-lb Linearity ±0.1 % full scale TN 600 in-lb Hysteresis ±0.1 % full scale TP 1200 in-lb Non-repeatability ±0.03 % full scale 3000 in-lb Output 2 mV/V nominal TR Resolution Infinite TT 6000 in-lb TV 12000 in-lb TW 24000 in-lb ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -54 °C to 107 °C [-65 °F to 225 °F] Temperature, compensated 16 °C to 71 °C [60 °F to 160 °F] Temperature effect, zero 0.005 % full scale/ °F Temperature effect, span 0.005 % reading/ °F ELECTRICAL SPECIFICATIONS Characteristic Measure Strain gage type Bonded foil Excitation 10 Vdc Bridge resistance 350 ohm Electrical termination MS3102A-14S-6P or equivalent Mating connector MS3106A-14S-6S or equivalent (not included) 2 Honeywell • Sensing and Control OPTION CODES Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. Torque range 100, 300, 600, 1200, 3000, 6000, 12000, 24000 in-lb Temperature compensation 1a. 16 °C to 71 °C [60 °F to 160 °F] 1b. -1 °C to 54 °C [30 °F to 130 °F] 1c. -18 °C to 85 °C [0 °F to 185 °F] 1d. -29 °C to 54 °C [-20 °F to 130 °F] 1e. -29 °C to 93 °C [-20 °F to 200 °F] 1f. 21 °C to 121 °C [70 °F to 250 °F] Internal amplifiers 2u. Unamplified, mV/V output Electrical termination 6a. Bendix PTIH-10-6P - 6-pin (max. 121 °C [250 °F]) 6b. MS connector MS3102E-14S-6P (mates with MS3106E-14S-6S, max 160 °F) 6e. Integral cable: Teflon 6f. Integral cable: PVC 6g. Integral cable: Neoprene 6h. Integral cable: Silicone Interfaces 53e. Signature calibration 53t. T.E.D.S. IEEE 1451.4 module Shaft Type Reaction Torque Transducer MECHANICAL SPECIFICATIONS Characteristic Measure Static overload capacity 50 % over capacity Case material Stainless steel MOUNTING DIMENSIONS Range (in-lb) ØD1 mm [in] ØD2 mm [in] K key size A mm [in] B mm [in] L mm [in] 100 19.05 mm [0.75 in] 57,15 mm [2.25 in] 3/16 69,85 mm [2.75 in] 57,15 mm [2.25 in] 203,2 mm [8.00 in] 600, 1200 25,4 mm [1.00 in] 57,15 mm [2.25 in] 1/4 69,85 mm [2.75 in] 57,15 mm [2.25 in] 203,2 mm [8.00 in] 3000, 6000, 12000 38,1 mm [1.50 in] 88,9 mm [3.50 in] 3/8 95,25 mm [3.75 in] 76,2 mm [3.00 in] 279,4 mm [11.00 in] 24000 69,85 mm [2.75 in] 101,6 mm [4.00 in] 5/8 129,54 mm [5.10 in] 101,6 mm [4.00 in] 330,2 mm [13.00 in] For reference only TYPICAL SYSTEM DIAGRAM Honeywell • Sensing and Control 3 Model QSFK-9 Shaft Type Reaction Torque Transducer Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to firstname.lastname@example.org WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008805-1-EN IL50 GLO June 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.