Honeywell | S3C DC-DC Short-Stroke LVDT | Datasheet | Honeywell S3C DC-DC Short-Stroke LVDT Datasheet

Honeywell S3C DC-DC Short-Stroke LVDT Datasheet
Model S3C DC-DC
Miniature Displacement Transducer
DESCRIPTION
Model S3C (captive guided spring return armature) dc-dc min-
alternative to larger, more expensive units. This model is com-
iature displacement transducer is ideally suited for multi-point
patible with dc data logging equipment used for taking readings
applications with space constraints and provide a cost-effective
from strain gages or other dc operated transducers.
FEATURES
•
Miniature design
•
Cost efficient
•
0.25 % non-linearity
•
Stainless steel construction
•
±0.1 in to ±0.4 in range
•
Infinite resolution
•
Single or dual supply wiring (field selectable)
•
Captive guided spring return armature
•
Not RoHS compliant
Model S3C DC-DC
PERFORMANCE SPECIFICATIONS
RANGE CODES
Characteristic
Measure
Range Code
Available ranges
Stroke range
±2,54 mm to 10,16 mm [±0.1 in to 0.4
in]
HM
±2,54 mm [±0.1 in]
Non-linearity (max.)
±0.25 % full scale
HN
±5,08 mm [±0.2 in]
Output impedance
2 ohm
HF
±7,62 mm [±0.3 in]
Output load (min.)
2000 ohm
HG
±10,16 mm [±0.4 in]
Output sensitivity
±5 Vdc or 0 Vdc to 10 Vdc (field selectable)
Resolution
Infinite
OPTION CODES
Range Code
Many range/option combinations are available in
our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/
TMsensor-ship for updated listings.
Stroke ranges
±5,08 mm [±0.2 in], ±2,54 mm [±0.1 in], ±7,62
mm [±0.3 in], ±10,16 mm [±0.4 in]
ENVIRONMENTAL SPECIFICATIONS
Characteristic
Measure
Temperature, operating
-50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero
(max.)
0.006 % full scale/°F
Electrical
termination
Multiconductor shielded cable (1.83 m [6 ft])
6a. Bendix PTIH-10-6P right angle Bendix
Temperature effect, span
(max.)
0.017 % full scale/°F
Electrical cable
orientation
Ra. Right angle
Mounting
threads
13a. 1/2-20 UNF
13f. 3/8-32 UNF
Improved
linearity
L10. 0.1 % on some models
ELECTRICAL SPECIFICATIONS
Characteristic
Measure
Element type
dc-dc displacement transducer
Power supply, single
24 Vdc to 40 Vdc @ 30 mA
Power supply, dual
±12 Vdc to ±20 Vdc @ 30 mA
Electrical termination
Multiconductor shielded cable (1.83 m
[6 ft])
MECHANICAL SPECIFICATIONS
Characteristic
Measure
Case material
Stainless steel
Probe material
Stainless steel
Armature type
Captive guided spring return
Probe thread
Not applicable
Weight
82,5 g [2.91 oz]
2 Honeywell • Sensing and Control
Miniature Displacement Transducer
MOUNTING DIMENSIONS
WIRING CODES
Wire color Dual supply
Single supply
(floating)*
Outputs
Red
12 V to 20 V
input
24 V to 40 V
input
–
Blue
-12 V to -20 V
input
Supply negative
–
Black
OV, I/P, O/P common
–
–
Yellow
–
–
0 V to 10 V
Green
–
–
±5 Vdc
For reference only
TYPICAL SYSTEM DIAGRAM
* Output common floats at voltage source/2
Honeywell • Sensing and Control
3
Model S3C DC-DC
NOTES
Miniature Displacement Transducer
1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement
transducer.
Warranty. Honeywell warrants goods of its manufacture as
being free of defective materials and faulty workmanship.
Honeywell’s standard product warranty applies unless agreed
to otherwise by Honeywell in writing; please refer to your
order acknowledgement or consult your local sales office for
specific warranty details. If warranted goods are returned to
Honeywell during the period of coverage, Honeywell will repair
or replace, at its option, without charge those items it finds
defective. The foregoing is buyer’s sole remedy and is in lieu
of all warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special, or
indirect damages.
While we provide application assistance personally, through our
literature and the Honeywell web site, it is up to the customer to
determine the suitability of the product in the application.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this printing.
However, we assume no responsibility for its use.
WARNING
PERSONAL INJURY
• DO NOT USE these products as safety or emergency
stop devices or in any other application where failure of
the product could result in personal injury.
Failure to comply with these instructions could result in
death or serious injury.
Find out more
WARNING
Honeywell serves its customers
MISUSE OF DOCUMENTATION
through a worldwide network of
• The information presented in this datasheet is for
reference only. DO NOT USE this document as product
installation information.
• Complete installation, operation and maintenance
information is provided in the instructions supplied with
each product.
sales offices, representatives
and distributors. For application
assistance, current specifications, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
Failure to comply with these instructions could result in
death or serious injury.
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
info.tm@honeywell.com
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
008757-2-EN IL50 GLO
September 2009
Copyright © 2009 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising