Model SSA AC-AC Sub-Sea Displacement Transducer DESCRIPTION Model SSA ac-ac displacement transducer is offered in ranges sor is made from 316 SS with all-welded construction. Honeywell from ±0.5 in up to ±4.0 in stroke length. The oceanographic type offers in-line amplifiers and digital indicators for both LVDT mod- of electrical plug allows the connection to be made underwater. els that provide ±5 Vdc, 10 Vdc or 4 mA to 20 mA and RS232 This Sub-Sea displacement sensor are pressure rated to operate outputs with zero and span adjustments. down to a depth of 7500 feet in sea water. The body of the sen- FEATURES • ±1.0 % non-linearity • Submersible • All welded 316 stainless steel construction • Easy to operate • Enhanced immunity to electrical noise • Up to 2286 m [7500 ft] depth • ±12,7 mm to 101,6 mm range [±0.5 in to ±4.0 in range] • Infinite resolution • Not RoHS compliant Model SSA AC-AC PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range Code Available ranges Stroke range ±12,7 mm to 101,6 mm [±0.5 in to 4.0 in] HP ±12,7 mm [±0.5 in] HQ ±25,4 mm [±1.0 in] HR ±50,8 mm [±2.0 in] HS ±76,2 mm [±3.0 in] HT ±101,6 mm [±4.0 in] Non-linearity (max.) ±1.0 % full scale Output sensitivity Consult factory; 0.3 V RMS to 3.0 V RMS range dependent Resolution Infinite ENVIRONMENTAL SPECIFICATIONS Characteristic Measure Temperature, operating -40 °C to 50 °C [-40 °F to 122 °F] Temperature effect, zero (max.) 0.005 % full scale/°F Temperature effect, span (max.) 0.005 % full scale/°F Operating pressure 3500 psi ELECTRICAL SPECIFICATIONS Characteristic Measure Element type ac-ac displacement transducer Input supply (acceptable) 0.5 V RMS to 7 V RMS @ 5 kHz Ripple Not applicable Electrical termination Includes submersible, neoprene, and nickel-aluminum bronze connector molded to 1.83 m [6 ft] of neoprene jacketed 10,16 mm [0.40 in] diameter cable. The electrical connector may be mated under water up to 500 psi or 335,28 m [1100 ft]. Longer cable lengths are available up to 990,6 m [3250 ft]. Consult factory for information. MECHANICAL SPECIFICATIONS Characteristic Measure Case material 316 Stainless steel with all welded construction Probe material 316 Stainless steel with all welded construction Probe thread M10 x 1.5 2 Honeywell • Sensing and Control OPTION CODES Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. Stroke ranges ±12,7 mm to 101,6 mm [±0.5 in to 4 in] Electrical termination Submersible, neoprene and nickel-aluminum bronze connector molded to 1.83 m [6.0 ft] of neoprene jacketed cable Sub-Sea Displacement Transducer MOUNTING DIMENSIONS Range code Available stroke range L X D1 D2 A B HP ±12,7 mm [±0.5 in] 223,52 mm [8.8 in] 53,34 mm [2.1 in] 38,1 mm [1.5 in] 9,91 mm [0.39 in] 91,44 mm [3.6 in] 30,48 mm [1.2 in] HQ ±25,4 mm [±1.0 in] 251,46 mm [9.9 in] 66,04 mm [2.6 in] 38,1 mm [1.5 in] 9,91 mm [0.39 in] 91,44 mm [3.6 in] 30,48 mm [1.2 in] HR ±50,8 mm [±2.0 in] 345,44 mm [13.6 in] 91,44 mm [3.6 in] 38,1 mm [1.5 in] 9,91 mm [0.39 in] 91,44 mm [3.6 in] 30,48 mm [1.2 in] HS ±76,2 mm [±3.0 in] 434,34 mm [17.1 in] 116,84 mm [4.6 in] 38,1 mm [1.5 in] 9,91 mm [0.39 in] 91,44 mm [3.6 in] 30,48 mm [1.2 in] HT ±101,6 mm [±4.0 in] 535,94 mm [21.1 in] 142,24 mm [5.6 in] 38,1 mm [1.5 in] 9,91 mm [0.39 in] 91,44 mm [3.6 in] 30,48 mm [1.2 in] WIRING CODES Wire color Dual power supply Black Excitation high White Excitation low Red Signal high Green Signal low For reference only TYPICAL SYSTEM DIAGRAM Honeywell • Sensing and Control 3 Model SSA AC-AC Sub-Sea Displacement Transducer Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to email@example.com WARNING PERSONAL INJURY • DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION • The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. • Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008746-1-EN IL50 GLO May 2008 Copyright © 2008 Honeywell International Inc. All rights reserved.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project