Honeywell | RDI Series | Datasheet | Honeywell RDI Series Datasheet

Honeywell RDI Series Datasheet
Relialign™ Residential Door Interlock Switch
001031
RDI Series
Issue 4
Datasheet
FEATURES
DESCRIPTION
Relialign RDI Series Interlock Assemblies are
electromechanical devices designed for use in residential
applications where swing/hinge door applications are in
service. The Series design incorporates a “mechanical lock”
feature (power-to-unlock solenoid) rather than a solenoid lock
(de-energize solenoid to unlock) that prevents the swing door
from accidently being opened if no power is present to the
system or a temporary power loss occurs. A manual override is
integrated into the interlock for emergency use.
The Relialign Series solenoid circuit is further refined to
include integral switches which permit power to be applied
to the solenoid only when unlocking the door. This unique
solenoid circuit may reduce the complexity of the host
controller and extend the life of the solenoid since power is
applied only when the door is beginning to open.
• Certified to applicable sections of ASME A17.1 and UL 104
• Two separate independent switches to provide “door closed”
and “door locked” - factory wired for series or parallel
configurations
• No exposed switch contacts
• Key-to-cam engagement and snap-action switches
minimize nuisance stops
• Rugged die-cast metal housing with electrostatic epoxy
coating for enhanced durability and choice of several colors
• Exceeds required life of 50,000 cycles
• Exceeds residential pull force requirement of 150 lbs. with a
10X margin
• Solenoid accepts 24 Vac or Vdc
• Electrical connection choice of terminal strip or Cat 5
termination
POTENTIAL APPLICATIONS
USA: Swing/Hinge Doors
Residential
elevators
Residential
dumbwaiters
Mobility Impaired
Lifts
Canada: Swing/Hinge Doors
VALUE TO CUSTOMERS
• Certified to ASME and UL codes
• Easier installation with terminal strip or Cat 5 wire
connection
• Interlock accepts for 24 Vac or 24 Vdc signal
• Internal custom control of solenoid for increased life may
reduce complexity of host controller and potential “time
outs” from host controller
DIFFERENTIATION
• Exceeds residential pull force requirement of 150 lbs. with
a 10X margin with use of high strength stainless steel
solenoid plunger, cam and key
• No exposed or open electrical contacts
Sensing and Internet of Things
Residential
elevators
Residential
dumbwaiters
PORTFOLIO
Honeywell also manufactures a Commercial Door Interlock
(CDI) for commercial applications.
Relialign Residential Door Interlock Switches, RDI Series
Table 1. Specifications
Characteristic
Parameter
Product type
Relialign Electromechanical Door Interlock, RDI series
Mounting
Vertical mounting required for gravity to operate de-energized solenoid plunger
Interlock override option
Certifications
Mechanical override standard on RDI door interlocks
ASME, UL
ASME A17.1 (Safety Code for Elevators & Escalators),
UL 104 (Standard for Elevator Door Locking Devices)
Die-cast metal housing with zinc phosphate treatment & electrostatic epoxy coating
Investment cast stainless steel
Exceeds 150 lbs pull force requirement by a 10x factor
Two separate independent switches; one switch for door closed, one switch for door locked
Factory wired in parallel or series for door closed and door locked
24 Vac or 24 Vdc
AC, 0.35 A max; DC 0.2 A max
MICRO SWITCH snap action
Terminal strip or Cat 5
50,000 cycles minimum
4 ⁰C to 38 ⁰C [40 ⁰F to 100 ⁰F]
-40 ⁰C to 60 ⁰C [-40 ⁰F to 140 ⁰F]
Reference standards
Housing material
Key material
Key override force
Door indication
Wiring for door indication
Supply voltage
Supply current
Internal switches
Electrical connection
Electrical life
Operating temperature
Storage temperature
Figure 1. Design Features
Product listings right
or left hand installation
Terminal strip interface to
PCB for quicker and easier
connection
Custom solenoid
design offers
Two snap-action basic
universal voltage for switches controlling solenoid.
Honeywell
ac and dc applications
metal cam design
Reduces complexity
provides positive snap action
of host controller
Die-cast metal
enclosure using
current Honeywell
limit switch technology
Metal key engagement ensures
door is held securely closed to
reduce alignment issues /
Manual override
nuisance stoppage
features as required by
Optional CAT 5
connector is available
for customer connection
2 sensing.honeywell.com
Snap-action door switch
used to monitor door
position (open / closed)
certain approval
agencies
Relialign Residential Door Interlock Switches, RDI Series
Figure 2. Product Nomenclature
RDI
Switch Type
—
H
—
Cam Mat’l/
Cust. Restriction
RDI Series
H
Relialign™
Residential
Door Interlock
Metal
R
Key Entry
Position
R
Right
L
Left
Solenoid
Type
Electrical
Connection
ac/dc
D
dc
Enclosure
Color
Terminal strip
5
CAT5
Door Closed/
Door Locked Wiring
Series
White
B
Black
BR
P
Parallel
Bronze
NOTE: not all combinations of model code are available.
Please contact your Honeywell provider/representative for assistance.
* Key actuator included with door interlock
Table 2. Order Guide
Catalog LIstings
Description
RDI-H-L
Left-hand door interlock, terminal strip, series wiring (housing finish, white)
RDI-H-R
Right-hand door interlock, terminal strip, series wiring (housing finish, white)
RDI-H-LP
Left-hand door interlock, terminal strip, parallel wiring (housing finish, white)
RDI-H-RP
Right-hand door interlock, terminal strip, parallel wiring (housing finish, white)
RDI-H-L5B
Left-hand door interlock, CAT5 connector, series wiring (housing finish, black)
RDI-H-R5B
Right-hand door interlock, CAT5 connector, series wiring (housing finish, black)
RDI-H-L5P
Left-hand door interlock, CAT5 connector, parallel wiring (housing finish, white)
RDI-H-R5P
Right-hand door interlock, CAT5 connector, parallel wiring (housing finish, white)
RDI-H-L5
Left-hand door interlock, CAT5 connector, series wiring (housing finish, white)
RDI-H-R5
Right-hand door interlock, CAT5 connector, series wiring (housing finish, white)
RDI-H-LBR
Left-hand door interlock (housing finish, architectural bronze)
RDI-H-RBR
Right-hand door interlock (housing finish, architectural bronze)
Table 3. Order Guide (Replacement Actuator Keys)
Catalog LIstings
Description
GKZ91
Replacement actuator key (finish, white)
GKZ92
Replacement actuator key (finish, black)
GKZ93
Replacement actuator key (finish, architectural bronze)
Sensing and Internet of Things
3
Relialign Residential Door Interlock Switches, RDI Series
Figure 3. RDI Left-hand Mounting Dimensions • (For reference only) in
.85
1.99
2.79
7.375 ± .007
1.88
1.200
1.47
.500
.25
.76
2.03
2.29
(DOOR SURFACE)
(1.200)
2.71
7.125 ` .007
SWITCH
SHOWN
ACTUATED
8.457 +.040
-.022
(ACTUATOR LOCATION)
6.00
RUBBER
BUMPER
6.06
.40
.28
9.75
1.05
8.42
WINDOW
MID-POINT
.49
(PLUNGER
TRAVEL)
DOOR
SURFACE
.44
.23
.31
1.750
1.125
.65
2.5
FRONT OPENING
FOR EMERGENCY
OVER-RIDE
1.375
.500 TYP
4X Ø 0.190
2X .190
SIDE OPENING FOR
EMERGENCY OVER-RIDE
KEY (BOTH SIDES)
(.863)
1.15
1.44
NOTE: Interlock must be mounted vertically as illustrated.
4 sensing.honeywell.com
(.120)
(.260)
Relialign Residential Door Interlock Switches, RDI Series
Figure 4. RDI Right-hand Mounting Dimensions • (For reference only) in
Ø 0.88
.75
.85
1.99
2.79
1.88
1.47
8.42
WINDOW
MID-POINT
2.03
2.29
(DOOR SURFACE)
1.200
.76
DOOR
SURFACE
(1.200)
2.71
.49
(PLUNGER
TRAVEL)
6.00
RUBBER
BUMPER
7.125
6.06
.40
.28
7.375
.44
9.75
.31
1.05
.23
2.5
1.750
.65
1.375
1.125
8.457 +.040
-.022
(ACTUATOR LOCATION)
FRONT OPENING
FOR EMERGENCY
OVER-RIDE
(.863)
1.15
1.44
SIDE OPENING FOR
EMERGENCY OVER-RIDE
KEY (BOTH SIDES)
2X .190
4X Ø 0.190
.500 TYP
(.120)
(.260)
NOTE: Interlock must be mounted vertically as illustrated.
Sensing and Internet of Things
5
Relialign Residential Door Interlock Switches, RDI Series
Figure 5. Wiring Schematic Parallel Connection (CAT 5 connector)
ELECTRICAL
SCHEMATIC
7
7
DOOR CLOSED
8
3
8
3
SOLENOID CONTROL
2
5
Figure 6. Wiring Schematic Series Connection (CAT 5 connector)
ELECTRICAL
SCHEMATIC
SOLENOID
DOOR LOCKED
-
Figure 7. CAT 5 Connector Pin
Details
PIN #1
PIN #8
DOOR CLOSED
DOOR LOCKED
SOLENOID CONTROL
2
SOLENOID
-
6
Figure 8. Wiring Schematic Parallel Connection
(6-pin Terminal)
Figure 9. Wiring Schematic Series Connection
(4-pin Terminal)
ELECTRICAL
SCHEMATIC
5
ELECTRICAL
SCHEMATIC
C
DOOR CLOSED
4
1
D
2
3
B
SOLENOID CONTROL
SOLENOID
DOOR LOCKED
-
DOOR CLOSED
DOOR LOCKED
SOLENOID CONTROL
A
SOLENOID
6
D C B A
6 5 4 3 2 1
6 sensing.honeywell.com
-
Warranty/Remedy
Honeywell warrants goods of its manufacture as being free of
defective materials and faulty workmanship during the applicable warranty period. Honeywell’s standard product warranty
applies unless agreed to otherwise by Honeywell in writing;
please refer to your order acknowledgement or consult your
local sales office for specific warranty details. If warranted
goods are returned to Honeywell during the period of coverage,
Honeywell will repair or replace, at its option, without charge
those items that Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s sole remedy and is in lieu of all
other warranties, expressed or implied, including those of
merchantability and fitness for a particular purpose. In no
event shall Honeywell be liable for consequential, special,
or indirect damages.
While Honeywell may provide application assistance personally,
through our literature and the Honeywell web site, it is buyer’s
sole responsibility to determine the suitability of the product in
the application.
m WARNING
RISK TO LIFE OR PROPERTY
•
Never use this product for an application involving
serious risk to life or property without ensuring that
the system as a whole has been designed to address
the risks, and that this product is property rated and
installed for the intended use within the overall system.
Failure to comply with these instructions could result in
death or serious injury.
m WARNING
MISUSE OF DOCUMENTATION
•
•
The information presented in this product sheet is for
reference only. Do not use this document as a product
installation guide.
Complete installation, operation, and maintenance
information is provided in the instructions supplied with
each product.
Failure to comply with these instructions could result in
death or serious injury.
Specifications may change without notice. The information we
supply is believed to be accurate and reliable as of this writing.
However, Honeywell assumes no responsibility for its use.
For more information
Honeywell Sensing and Internet of
Things services its customers through a
worldwide network of sales offices and
distributors. For application assistance,
current specifications, pricing or the
nearest Authorized Distributor, visit
sensing.honeywell.com or call:
Asia Pacific
+65 6355-2828
Europe +44 1698 481481
USA/Canada
+1-800-537-6945
Honeywell Sensing and Internet of Things
9680 Old Bailes Road
Fort Mill, SC 29707
honeywell.com
001031-4-EN | 4 | 03/19
© 2019 Honeywell International Inc. All rights reserved.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising