Bradford White RG2F40S6N Atmospheric Fan Assist Gas Spec Sheet

Bradford White RG2F40S6N Atmospheric Fan Assist Gas Spec Sheet
Residential Atmospheric Vent
Fan Assist Gas Water Heater
The Fan Assist FVIR Defender Safety System® Models Feature:
Photo is of
RG2F40S6N
FEATURING:
■ ENERGY STAR® Qualified—Meet or exceed requirements for ENERGY STAR® per the
latest ENERGY STAR® criteria revision, as well as most utility rebate programs.
■ High Efficiency Blower—Pulls air through a tightly restricted baffle system resulting in
increased water heater efficiency ratings.
-- Ten Foot Power Cord—Included (120 VAC).
■ Bradford White ICON System™—Intelligent gas control with spark to pilot ignition
system eliminates the constant burning pilot. This results in savings of pilot gas during
standby periods (120 VAC).
-- Enhanced Performance—Proprietary algorithms provide enhanced First Hour Rating
and tighter temperature differential.
-- Advanced Temperature Control System—Microprocessor constantly monitors
and controls burner operation to maintain consistent and accurate water temperature
levels.
-- Intelligent Diagnostics—An exclusive green LED light prompts the installer during
start-up and provides ten different diagnostic codes to assist in troubleshooting.
-- Pilot On Indication—Flashing green LED provides positive indication that pilot is on.
-- Separate Immersed Thermowell—High-strength advanced polymer composite
thermowell provides isolation between electric temperature sensor and surrounding
water. No need to drain the tank when removing gas valve.
■ Advanced ScreenLok® Technology Flame Arrestor Design—Flame arrestor is
designed to prevent ignition of flammable vapors outside of the water heater.
■ Flammable Vapor Sensor—Electronic sensor prevents burner operation if flammable
vapors are detected.
■ Maintenance-Free—No regular cleaning of air inlet openings or flame arrestor is
required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the operation of
the pilot and burner.
■ Factory-Installed Hydrojet® Total Performance System—Sediment reducing device
that also increases first hour rating of hot water while minimizing temperature build-up in
tank.
■ Vitraglas® Lining—An exclusively engineered enamel formula that provides superior
tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is
fused to the steel surface by firing at a temperature of over 1600°F (871°C).
■ Insulation System—2" (51mm) Non-CFC foam insulation covers the sides and top
of the tank, reducing heat loss. This results in less energy consumption, improved
efficiencies, and jacket rigidity.
■ Pedestal Base.
■ Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings extend
water heater life and simplify water line connections.
■ Factory-Installed Heat Traps—Design incorporates a flexible disk that reduces heat
loss in piping and eliminates the potential for noise generation.
■ Protective Magnesium Anode Rod.
■ 3x4 “Snap Lock” Draft Diverter—Allows either 3" (76mm) or 4" (102mm) vent
connections.
■ T&P Relief Valve—Installed.
■ Low Restrictive Brass Drain Valve—Durable tamper proof design.
■ NOx Emissions—Less than 40 ng/J.
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties. See complete
copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526; 6,684,821;
7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888; 5,988,117; 7,621,238;
7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845; 2,504,824; 2,108,186; 2,143,031;
2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. Defender Safety System®, Vitraglas®, Hydrojet®, and ScreenLok® are registered trademarks of Bradford White® Corporation.
1124-A-0418
Residential Atmospheric Vent Fan Assist Gas Water Heater
Fan Assist Models
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
78% Recovery Efficiency
NATURAL GAS AND LIQUID PROPANE GAS
Model
Number
★ RG2F40S6N
★ RG2F50S6N
Model
Number
★ RG2F40S6N
★ RG2F50S6N
Model
Number
★ RG2F40S6N
★ RG2F50S6N
Nominal
Gal.
Capacity
Recovery at
90°F Rise*
DOE
Rated
First
Storage
LP
Hour Uniform
U.S. Imp. Volume BTU/Hr. BTU/Hr. Rating Energy
Gal. Gal. (Gal.)
Input
Input (Gal.) Factor
40
50
33
42
38
48
38,000
38,000
A
Floor to
Exhaust
Conn.
in.
B
Jacket
Dia.
in.
54 1/4
55 1/4
22
24
A
Floor to
Exhaust
Conn.
mm.
B
Jacket
Dia.
mm.
1378
1403
559
610
38,000
38,000
62
76
Model
Number
LP LP
U.S. Imp. U.S. Imp.
GPH GPH GPH GPH
0.64
0.68
41
41
33
33
40
40
Nominal
Liter
Capacity
★ RG2F40S6N
★ RG2F50S6N
33
33
151
189
DOE
Rated
Storage
Volume
(Liters)
kW
Input
144
182
11.1
11.1
E
Floor to
Gas
Conn.
in.
F
Floor to
Top of
Heater
in.
G
Floor to
Water
Conn.
in.
H
Depth
in.
D
Floor to
T&P
Conn.
in.
3 or 4
3 or 4
40
40 5/8
13
13
47
48
47 7/8
48 7/8
C
Vent
Size
mm.
D
Floor to
T&P
Conn.
mm.
E
Floor to
Gas
Conn.
mm.
F
Floor to
Top of
Heater
mm.
76 or 102
76 or 102
1016
1032
330
330
1194
1219
C
Vent
Size
Recovery at
50°C Rise*
LP
kW
Input
First
Hour
Rating
(Liters)
Uniform
Energy
Factor
Liters/
Hour
LP
Liters/
Hour
11.1
11.1
235
288
0.64
0.68
155
155
151
151
M
Water
Conn.
NPT
in.
S
Gas
Conn.
Size
in.
Approx.
Shipping
Weight
in.
J
C/L of
Water
Conn.
in.
25 7/8
27 7/8
8
8
/
3/4
/
1/ 2
150
176
G
Floor to
Water
Conn.
mm.
H
Depth
M
Water
Conn.
NPT
mm.
S
Gas
Conn.
Size
mm.
Approx.
Shipping
Weight
mm.
J
C/L of
Water
Conn.
mm.
1216
1241
657
708
203
203
19
19
13
13
68
80
34
M
Propane models feature a Titanium Stainless Steel propane burner. For Propane
(LP) models change suffix “N” to “X”.
H
For 10 year models, change suffix from “6” to “10”.
J
* Based on manufacturer’s rated recovery efficiency.
120V, 60Hz., 1 Amp.
M
Uniform Energy Factor and First Hour Rating is based on the latest AHRI directory listings.
H = ENERGY STAR® Qualified.
12
lbs.
kg.
B
C
M
H
J
A
M
B
C
G
F
D
S
E
A
General:
Meets NAECA Requirements.
All gas water heaters are certified at 300 PSI test pressure (2068 kPa) and 150 PSI working pressure (1034 kPa). All potable water connections are 3⁄4"
NPT (19mm) on
G 8" (203mm) centers. All models design-certified by CSA
F International (formerly AGA/CGA), ANSI Z21.10.1 and peak performance rated.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
D
Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into
the potable side of this system. The Spotable side may NEVER be connected to any existing heating system or component(s) previously used with a nonpotable water heating appliance.
E
For field service, contact your professional installer or local Bradford White sales representative.
Ambler, PA
1124-A-0418
Sales 800-523-2931 n Fax 215-641-1612
Technical Support 800-334-3393 n Email techserv@bradfordwhite.com
Warranty 800-531-2111 n Email warranty@bradfordwhite.com
International: Telephone 1-215-641-9400 n Email international@bradfordwhite.com / www.bradfordwhite.com
©2018, Bradford White Corporation. All rights reserved.
Printed in U.S.A.
Liters
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement