Bradford White RG2MH30T6X Manufactured Home Atmospheric Vent Gas Spec Sheet

Bradford White RG2MH30T6X Manufactured Home Atmospheric Vent Gas Spec Sheet
Residential Manufactured Home
Atmospheric Vent Gas Water Heater
The Manufactured Home FVIR Defender Safety System® Models Feature:
■ Advanced ScreenLok® Technology Flame Arrestor Design—Flame
arrestor is designed to prevent ignition of flammable vapor outside of the
water heater.
■ Resettable Thermal Switch—Proven and reliable bimetallic switch prevents
burner and pilot operation in case of ongoing flammable vapors burning inside
of the combustion chamber or restricted air flow.
■ Piezo Igniter—Easy and quick lighting of the pilot burner by push button.
■ Pedestal Base—Rugged and durable base allows easy transport and
positioning, while providing corrosion-resistant contact with floor.
■ Maintenance-Free—No regular cleaning of air inlet openings or flame
arrestor is required under normal conditions.
■ Sight Window—Offers a view into the combustion chamber to observe the
operation of the pilot and burner.
■ Housing and Urban Development—This water heater is designed in
accordance with H.U.D. and is certified for installation in a manufactured
home (mobile home) only and must be installed in an enclosure that will
completely separate the water heater combustion and venting system from
the dwelling interior.
■ Roof Jack Kit—Ordered separately and includes a roof jack kit and
hardware. Must specify roof jack size when ordering. Available in 12"
(305mm), 18"/32" (457/813mm), 32"/60" (813/1524mm), or 48"/95"
(1219/2413mm) lengths.
-- Must order roof jack kit for new installations.
■ Vitraglas® Lining—An exclusively engineered enamel formula that provides
■
■
■
■
Photo is of
RG2MH30T6X
FEATURING:
■
■
■
■
■
■
■
■
superior tank protection from the highly corrosive effects of hot water. This
formula (Vitraglas®) is fused to the steel surface by firing at a temperature of
over 1600°F (871°C).
Fully Automatic Controls—Automatic temperature selection at your
fingertips. Built-in energy cut-off switch prevents abnormally high water
temperature for extra safety. Built-in gas pressure regulation.
Convertible Gas Control—Easily convertible control for use with either
Propane or Natural Gas.
Insulation System—2" (51mm) Non-CFC foam insulation covers the
sides and top of the tank, reducing heat loss. This results in less energy
consumption, improved efficiencies, and jacket rigidity.
Water Connections—3⁄4" (19mm) NPT factory-installed true dielectric fittings
extend water heater life and simplify water line connections.
Heat Trap—Installed on hot water outlet to minimize heat loss through piping.
Protective Magnesium Anode Rod—Provides added protection against
corrosion for long-term, trouble-free service.
3"x4" “Snap Lock” Draft Diverter—Allows either 3" (76mm) or 4" (102mm)
vent connections with inputs of 40,000 BTU/Hr. or less.
Flue Baffle—Maximizes the amount of heat absorbed by the tank and
reduces heat loss during standby periods.
Steel Tank—Heavy gauge steel automatically formed, rolled, and welded.
T&P Relief Valve—Installed.
Low Restrictive Brass Drain Valve—Durable tamper proof design.
Design Certified by CSA International (formerly AGA/CGA).
6 or 10-Year Limited Tank Warranties / 6 or 10-Year Limited Warranty on Component Parts.
For more information on warranty, please visit www.bradfordwhite.com
For products installed in USA, Canada, and Puerto Rico. Some states do not allow limitations on warranties.
See complete copy of the warranty included with the heater.
MANUFACTURED UNDER ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 5,682,666; 7,634,976; 5,660,165; 5,954,492; 6,056,542; 6,935,280; 5,372,185; 5,485,879; 5,574,822; 7,971,560; 7,992,526;
6,684,821; 7,334,419; 7,866,168; 7,270,087; 7,007,748; 5,596,952; 6,142,216; 7,699,026; 5,341,770; 7,337,517; 7,665,211; 7,665,210; 7,063,132; 7,063,133; 7,559,293; 7,900,589; 5,943,984; 8,082,888;
5,988,117; 7,621,238; 7,650,859; 5,761,379; 7,409,925; 5,277,171; 8,146,772; 7,458,341; 2,262,174. OTHER U.S. AND FOREIGN PATENT APPLICATIONS PENDING. CURRENT CANADIAN PATENTS: 2,314,845;
2,504,824; 2,108,186; 2,143,031; 2,409,271; 2,548,958; 2,112,515; 2,476,685; 2,239,007; 2,092,105; 2,107,012. ScreenLok® and Vitraglas® are registered trademarks of Bradford White® Corporation.
1110-A-0418
Residential Manufactured Home Atmospheric Vent Gas Water Heater
Manufactured Home Models
Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed
76% Recovery Efficiency
NATURAL GAS AND LIQUID PROPANE GAS
Model
Number
RG2MH30T6X
RG2MH40T6X
Model
Number
RG2MH30T6X
RG2MH40T6X
Model
Number
RG2MH30T6X
RG2MH40T6X
Nominal
Gal.
Capacity
Recovery at
90°F Rise*
DOE
Rated
First
Storage
LP
Hour Uniform
U.S. Imp. Volume BTU/Hr. BTU/Hr. Rating Energy
Gal. Gal. (Gal.)
Input
Input (Gal.) Factor
30
40
25
33
29
37
32,000
34,000
A
Floor to
Flue
Conn.
in.
B
Jacket
Dia.
in.
59 15/16
60 3/8
18
20
A
Floor to
Flue
Conn.
mm.
B
Jacket
Dia.
mm.
1522
1534
457
508
32,000
34,000
50
54
Nominal
Liter
Capacity
Model
Number
LP LP
U.S. Imp. U.S. Imp.
GPH GPH GPH GPH
0.54
0.59
34
37
28
31
34
37
RG2MH30T6X
RG2MH40T6X
28
31
DOE
Rated
Storage
Volume
(Liters)
kW
Input
110
140
9.4
10.0
114
151
E
Floor to
Gas
Conn.
in.
F
Floor to
Top of
Heater
in.
G
Floor to
Cold Water
Conn.
in.
H
Depth
in.
D
Floor to
T&P
Conn.
in.
3 or 4
3 or 4
49 11/16
49 11/16
12 3/4
13 3/8
56 3/8
56 1/4
2113/16
2113/16
C
Vent
Size
mm.
D
Floor to
T&P
Conn.
mm.
E
Floor to
Gas
Conn.
mm.
F
Floor to
Top of
Heater
mm.
76 or 102
76 or 102
1262
1262
324
340
1432
1429
C
Vent
Size
Recovery at
50°C Rise*
LP
kW
Input
First
Hour
Rating
(Liters)
Uniform
Energy
Factor
Liters/
Hour
LP
Liters/
Hour
9.4
10.0
190
205
0.54
0.59
129
140
129
140
M
Water
Conn.
NPT
in.
S
Gas
Conn.
Size
in.
Approx.
Shipping
Weight
in.
J
Floor to
Hot Water
Conn.
in.
21 5/8
23 5/8
57 5/8
57 13/16
/
3/ 4
/
1/ 2
118
135
G
Floor to
Cold Water
Conn.
mm.
H
Depth
M
Water
Conn.
NPT
mm.
S
Gas
Conn.
Size
mm.
Approx.
Shipping
Weight
mm.
J
Floor to
Hot Water
Conn.
mm.
554
554
549
600
1464
1468
19
19
13
13
54
61
C
34
H
12
lbs.
kg.
M
To order a natural gas heater change suffix “X” to “N”. For 10 year models, change suffix from “6” to “10”.
B
* Based on manufacturer’s rated recovery efficiency.
Uniform Energy Factor and First Hour Rating is based on the latest AHRI directory listings.
B
C
K
9"
22.5° Max.
ANODE
7"
4"
11 5/8"
Square
A
D A
H
B
M
5"
6 1/2"
A
G H
B
3"
J
C
E
Optional Roof Jack Kits
Part Number
239-37030-01
239-37030-02
239-37030-03
239-37030-04
A
B
15"
16"-33"
331/2"
331/2"-66"
321/2"-621/2" 371/2"-74"
50"-981/2" 541/2"-1091/2"
Through The Roof
Clearance
12"
18" / 32"
32" / 60"
48" / 90"
(Includes roof jack, hardware, instructions)
F
D
F
S
G
E
A
J
D Access to the water heater enclosure from the
The water heater enclosure access door must be on the outside wall of the manufactured home (mobile home) only.
F
inside of the manufactured home (mobile home) is not permitted. The CSA International
(formerly AGA/CGA) listing of this water heater includes the field installation
of the following components: roof jack and heater tie down materials. These componentsSfor field installation are shipped in a separate box from the heater and
must be installed according to instructions. No other components are approved for use with the water heater. The water heater must be installed in accordance
with The Federal Manufactured Home Construction and Safety Standard Title 24 CRF, Part 3280.
G
General:
E
Meets NAECA Requirements.
All gas water heaters are certified at 300 PSI (2068 kPa) test pressure and 150 PSI (1034 kPa) working pressure. All water connections are 3⁄4" NPT
(19mm). All gas connections are 1⁄2" (13mm). All models design-certified by CSA International (formerly AGA/CGA), ANSI Z21.10.1 and peak performance
rated. Designed in accordance with the H.U.D. Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280.707 (d)(2) for energy
efficiency.
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
Suitable for Water (Potable) Heating and Space Heating. Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this
system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
For field service, contact your professional installer or local Bradford White sales representative.
Ambler, PA
1110-B-0418
Sales 800-523-2931 n Fax 215-641-1612
Technical Support 800-334-3393 n Email techserv@bradfordwhite.com
Warranty 800-531-2111 n Email warranty@bradfordwhite.com
International: Telephone 1-215-641-9400 n Email international@bradfordwhite.com / www.bradfordwhite.com
©2018, Bradford White Corporation. All rights reserved.
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement