Vitek VT-1205A-D4B Manual
Below you will find brief information for Power Supply VT-1205A-D4B. This power supply provides 12V, 5A power for up to 4 security cameras. Each channel is protected with a 1.6A fuse. Installation is easy, requiring only simple steps. The power supply can be wall-mounted and utilizes the back of the box as a template for drilling mounting holes. The installation instructions include details on connecting cables, the backup battery, and the power output terminal. The device features a green LED that indicates power is being supplied to the camera, and a cover for securing the unit.
Advertisement
Advertisement
Advertisement
Key features
- 12V, 5A power output
- 4 channel power supply
- Wall mountable
- PTC resettable fuse on each channel
- Backup battery compatible
- Green LED power indicator
- Easy installation
- Secure cover
Frequently asked questions
Connect each camera device to one “+U” & one “-U” power output terminal. Ensure that the “+” & “-“ match at the camera.
To avoid the risk of fire use only type STP-2 wire or heavier gauge No.18AWG copper at minimum. Use wire suitable for at least 194 degrees F.
Yes, when using an approved optional backup battery, connect red and black wire from the Battery Input Terminal to the battery terminal. Red is for positive and black is for negative.