Caple BXC611 & BXC911 Extraction Instruction Manual

advertisement

Caple BXC611 & BXC911 Extraction Instruction Manual
Chimney hood
instruction manual
BXC611 BXC911
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk
BXC611 _ BXC911 v2.indd 1
30/06/2016 14:03
CONTENTS
Introduction
3
Safety instructions
4
Environmental protection
9
Installation
10
Installing the charcoal filter
14
Operation
15
Care and maintenance
16
Troubleshooting
17
Guarantee
19
Please keep this instruction manual for future reference
2
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 2
30/06/2016 14:03
INTRODUCTION
Thank you for choosing this Caple extractor hood.
To ensure that you get the best results from your new extractor, we strongly suggest
that you read this instruction manual thoroughly before use. If treated with care,
your Caple extractor should give you years of trouble-free use.
To register ownership, please ensure you complete and return the guarantee card
supplied with the appliance or visit www.caple.co.uk and register here.
This instruction manual is designed to provide you with all the required information
related to the installation, use and maintenance of the appliance.
This hood is designed to extract unpleasant odours from the kitchen; it is not
intended to extract steam. In order to operate the unit correctly and safely, please
read this instruction manual carefully before installation and use.
The cooker hood uses high quality materials and is made with a streamlined design.
Equipped with an electric motor and centrifugal fan, it provides strong extraction
with low noise. It also features non-stick grease filters and an easy installation.
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 3
3
30/06/2016 14:03
IMPORTANT
This appliance must only be used for the
purpose it is intended. Other types of use are not
permitted and may prove dangerous. Caple will
not be held liable for any damage caused by the
incorrect use of the appliance.
Do not use any accessories or attachments not
recommended by Caple as this may result in fire,
electric shock or injury.
To protect against fire, electrical shock and injury
to persons, do not immerse cords or plugs in
water or any other liquid.
Never touch the appliance with wet or damp
hands.
Never pull the power cable as you could damage
it. If the appliance is faulty, do not attempt to
repair it. Isolate it from the mains electric supply
and contact Caple Service either by phone
0117 938 7420 or email service@caple.co.uk
Keep all packaging (including plastic bags,
polystyrene foam etc) out of the reach and away
from children.
Do not rest large or unstable objects on any part
of the appliance.
Please keep this instruction manual for future reference
4
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 4
30/06/2016 14:03
IMPORTANT
Caple cannot be held responsible for injuries or
losses caused by incorrect use or installation of
this product. Please note that Caple reserve the
right to invalidate the guarantee supplied with
this product following incorrect installation or
misuse of the appliance. Under no circumstances
should any external covers be removed for
servicing or maintenance except by suitably
qualified personnel.
SAFETY INSTRUCTIONS
--Never let children operate the machine.
--The cooker hood is for home use only, not suitable for
barbecuing, restaurants or other commercial purposes.
--The cooker hood and its filter should be cleaned regularly
in order to keep in good working condition.
--Clean the cooker hood according to the instruction
manual to reduce the risk of fire.
--When using a gas hob, do not leave naked flames under
the extractor.
--Before connecting this appliance check that the power
supply cord is not damaged.
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 5
5
30/06/2016 14:03
--If the room where the hood is to be used contains a fuel
burning appliance such as a central heating boiler then
its flue must be of the sealed or balanced flue type. If
other types of flue or appliances are fitted ensure that
there is an adequate supply of air to the room.
--The air must not be discharged into a flue that is used
for exhausting fumes from appliances burning gas or
other fuels.
--Regulations concerning the discharge of air have to be
conformed to.
--Do not flambé under the cooker hood.
--Never leave frying pans unattended during use as overheated fats and oils may catch fire.
--To ensure the best performance, we recommend
switching on the extractor 15 minutes before cooking
and leave it running 15 minutes after. This will ensure
that the air in the kitchen is being circulated before
cooking commences and the air is being cleaned after
cooking has finished.
--The performance of your extractor will vary depending
on a number of factors. These include type of extraction,
room volume, length of ducting, ventilation available and
the cleanliness of the filters.
Please keep this instruction manual for future reference
6
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 6
30/06/2016 14:03
--This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
--Children should be supervised to ensure that they do not
play with the appliance.
--Cleaning and user maintenance must not be made by
children without supervision.
--Never immerse the appliance in water.
--This product is not designed for commercial use, it is a
household appliance only. It is not intended to be used
in:
• Staff kitchen areas in shops, offices and other working
environments.
• Bed and breakfast type environments.
• By clients in hotels, motels and other residential type
environments.
--To avoid all risk, if the power cable is damaged, it must
only be replaced by a Caple appointed engineer.
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 7
7
30/06/2016 14:03
--Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved.
--Children must not play with this appliance.
--When not in use and before cleaning, always isolate the
appliance from the electrical supply.
ELECTRICAL SHOCK HAZARD
--Only plug this unit into a properly earthed outlet. If in
doubt seek advice from a suitably qualified engineer.
--Failure to follow these instructions can result in death,
fire, or electrical shock.
--This appliance must be connected to the mains by
a competent person. We recommend that the
appliance is connected by a qualified electrician
who is a member of the N.I.C.E.I.C who will
comply with the I.E.E and local regulations.
Electrical information can be found on the
rating plate.
Please keep this instruction manual for future reference
8
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 8
30/06/2016 14:03
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling
advice. This appliance is marked according to the European directive 2002/96/EC on
Waste Electrical and Electronic Equipment (WEEE).
By ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product. The symbol
on the product indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of
electrical and electronic equipment. Disposal must be carried out in accordance with
local environmental regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local council, your household waste disposal service or
the retailer where you purchased the product
CE DECLARATIONS OF CONFORMITY
This appliance has been manufactured to the strictest standards and complies
with all applicable legislation, Low Voltage Directive (LVD) and Electromagnetic
Compatibility (EMC).
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 9
9
30/06/2016 14:03









INSTALLATION




 Prepare for the installation:

If you have an outlet to the outside, your cooker hood can be
connected as per the below picture by means of an extraction
duct with an interior diameter of 150mm.



Before installation, turn the unit off and unplug it from
the outlet.

           
          
            



The cooker
hood
should be placed at a minimum distance of
























65~76cm
above
the
           hob. It is the manufacturer of the hob
 
 











the
 clearance required and the clearance
who
determines








quoted by the hob manufacturer must be followed. In the
absence of any instructions supplied with a gas hob the
minimum distance between the hob and the hood must be
at least 760mm.
4
44
Please keep this instruction manual for future reference
10
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 10
30/06/2016 14:03

INSTALLATION – DUCTED

Attention!
the operation of the appliance
the
concerning

Observe
warning

when air is discharged from the room.

When the cooker hood and appliance supplied with energy other than electricity

are simultaneously in operation, the negative pressure in the room must not exceed


4 Pa (4×10-5 Bar) 
Drill 3
to
accommodate
the
bracket.
Screw
and 
tighten
the bracket

x8mm
holes






onto the wall with the screws and screw plugs provided.







Level
up the cooker hood and hang onto the wall bracket hook.



Please keep this instruction manual for future reference
5Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 11
11
30/06/2016 14:03
           

             

Secure the body with security screws,Use
ST4x30mmscrews.
screws.
screws, use 22 pcs
x ST4x30mm
Exhaust pipe
Cooker hood









of the

 

 





 
Fix the
one-way-valve
to the
air
outlet
cooker
hood.


Fix theattach
one-way-valve
to the
outlet
the cooker hood.
Then, attach the exhaust
the exhaust
pipeair
onto
theof
one-way-valve
 Then,
 
 

  as shown below.
pipe onto the one-way-valve as shown below.

Exhaust pipe
Exhaust pipe
Cooker hood
Cooker hood




  
          
  

6
Please keep this instruction
manual for future reference
Please keep this instruction manual for 6
future reference
12
Instruction manual BXC611 BXC911
12
Instruction manual BXC611 BXC911C
BXC611 _ BXC911.indd 12
18/05/2016 12:32
BXC611 _ BXC911 v2.indd 12
30/06/2016 14:03
Chimney installation
Place the upper chimney
into lower chimney.

Attach
the
lower
chimney
bracket to the lower chimeny.




Mark and drill 2 holes to fix the lower chimney bracket with 2 wall plugs and


2 screws ST4x30mm.
















Slide the chimney to adjust the chimney height. When the height you require is


reached, mark and drill the fixing hole and fix the upper chimney bracket with 2


wall plugs and 2 ST4x30mm.

 Fix the upper chimney with the upper chimney bracket using 2 scews ST4x8mm.
 















BXC611 _ BXC911 v2.indd 13










7
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
13
30/06/2016 14:03


, and
ers must beINSTALLATION
installed.
– RECIRCULATION
MODE
If you do not have an outlet to the outside, the
exhaust pipe is not required (as shown in the
section “Installation - ducted”), and charcoal filters
must be installed.

(CAP61CF)

(CAP61CF)
Installing the charcoal
filter (CAP61CF)




An activated charcoal filter
can be used to trap odours. In order to install the

charcoal filter, the grease
filter should be detached first. Press the release button
and pull it downward as shown below.
Fit the activated charcoal 
filter onto the side of the motor and turn it in a clockwise

direction to lock into place.
Repeat the same on the other side.


NOTE:
Make sure the filter is securely locked.
Otherwise, it may loosen and be dangerous.
When using a charcoal filter, the extraction
power may be slightly reduced.
We recommend replacing these filters
every 6 months. Replacement filters
(CAP61CF) can be purchased directly
from www.caple.co.uk


8
 
 


keep this instruction manual for future
reference
 Please



Instruction replacing
manual
BXC911C
 BXC611
We
recommend
these
filters every 6 months. Replac
 14
We recommend
these
filters
everyreplacing
6 months.
Replacement
filters (CAP61CF)
can be
purchased directly from www.caple.c
filters (CAP61CF) can be purchased
directly from
www.caple.co.uk
BXC611 _ BXC911 v2.indd 14
30/06/2016 14:03
OPERATION - TOUCH CONTROL
On/Off button
Press and hold for 2-3 seconds to turn the extractor fan on.
You can then change the speeds as per below. Press again to switch off
Low Speed button
Is suitable for simmering and cooking which does not produce much
steam or odour
Medium Speed button
Airflow speed is ideal for extracting with standard cooking
High Speed button
When a high amount of steam or odours are produced, use the high
speed setting for the most effective extraction
Light button
Switches the light on and off.
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 15
15
30/06/2016 14:03
CARE AND MAINTENANCE
IMPORTANT:
Before cleaning or maintenance please switch off the electricity supply and remove
the plug from the wall.
Regular cleaning
Use a soft damp cloth with lukewarm mildly soapy water or household cleaning
detergent. Never use metal pads, chemicals, abrasive material, abrasive cleaning
creams or stiff brushes to clean the appliance.
Cleaning the grease filter
Clean the filter every month to help minimise the risk of fire. The filter collects
grease, smoke and dust, therefore the filter is directly affecting the efficiency of the
cooker hood. If not cleaned, the grease residue (which is potentially flammable) will
saturate the filter. It can be easily cleaned with warm water and washing up liquid,
alternatively the filters can be cleaned in your dishwasher. Please ensure no other
items are washed with the filters, they must be washed separately to prevent food
becoming trapped in the gauze. Cleaning the grease filters in the dishwasher may
lead to discolouration, this is normal and is a not a fault with the product.
Replacing your charcoal filter
This only applies if you are using the hood in recirculation mode (not vented to
the outside). The charcoal filter traps your cooking odours and they need to be
replaced, this can vary depending on how frequently the cooker hood is used. We
recommend replacing them at least every 6 months.
This extractor uses CAP61CF charcoal filters. Filters can be purchased directly from
www.caple.co.uk.
Please keep this instruction manual for future reference
16
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 16
30/06/2016 14:03







REPLACING THE BULB
1. Switch the unit off and unplug the appliance.
2. Remove the lamp cover by unscrewing the 2 screws.
3. Replace with the same type and rated bulb/lamp fixing.
LED lamp (max.1.5W).



TROUBLESHOOTING
Fault
The lights on, but
the fan does not
work
The lights and fan
do not work
Cause











Solution
The fan blade is jammed
The motor is damaged


off
the unit and contact
Switch

Caple Service. To be repaired
by


qualified service personnel only.



A blown fuse
Replace 
the fuse

The power cord is loose


  





Plug in to the power supply

again 


Switch off the unit and contact



The fan blade is damaged
Caple Service.
To be repaired
by




qualified service personnel only

Serious vibration
of the unit
Switch off the unit and contact

The fan motor is not fixed
Service. To be repaired by
119Caple
938 7420
tightly.
qualified service personnel only
The unit is not hung
correctly on the bracket
The extraction
performance is
not good
The filter requires
cleaning
Take down the unit and12 check
whether the bracket is in the
correct location.
Clean the grease filter as
directed in the ‘Care and
maintenance’ section. Replace
the charcoal filter (if in
recirculation mode)
If the above table has not solved the problem please contact Caple Service by
phone on 0119 938 7420 or by email service@caple.co.uk
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 17
17
30/06/2016 14:03
Product dimensions
PRODUCTCGC910BK
DIMENSIONS
@caple
PRODUCT DIMENSIONS
BXC911
BXC611
BXC611
BXC911
m
3m
32
28
CGC610BK
CGC610SS
2m
m
470-936mm
548-1000mm
m
64m
CGC610BK
CGC610SS
5
m
0m
6
50
00
0/9
60
mm
0m
m
m
95m
5/8
Please keep this instruction manual for future reference
18
Instruction manual BXC611 BXC911C
Please keep this instruction manual for future reference
BXC611 _ BXC911 v2.indd 18
30/06/2016 14:03
GUARANTEE
Caple undertake that if within 2 years from the date of the purchase, this
appliance or any part thereof that is proved to be defective by reason only of faulty
workmanship or materials, we will at our option repair or replace the same free of
any charge for labour or materials on condition that:
-- Documentation must be provided before a guarantee repair commences to
confirm that the extractor is within the guarantee period.
-- The appliance has been correctly installed and used only on the electrical supply
stated on the rating plate.
-- The appliance has been used for normal domestic purposes only, and in
accordance with the operating and maintenance instructions.
-- The appliance has not been serviced, maintained, repaired, taken apart or
tampered with by any person not authorised by us.
-- All service work under this guarantee must be undertaken by Caple Service
Centre.
-- Any appliance or defective part replaced shall become the property of this
company.
-- If a service call is made and it is found that the installation has not been carried
out correctly or customer misuse/abuse is involved the cost of the service call has
to be paid for by the user before any service work is carried out.
EXCLUSIONS
THIS GUARANTEE DOES NOT COVER:
-- Damage or calls resulting from transportation, improper use or neglect, the
replacement of any light bulbs or removable parts of glass or plastic.
-- Costs incurred for calls to put right appliances improperly installed or calls to
appliances outside the United Kingdom.
-- Appliances found to be in use within a commercial environment, plus those which
are the subject of rental agreements.
-- This guarantee is in addition to and does not affect your statutory and legal rights.
Please keep this instruction manual for future reference
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 19
19
30/06/2016 14:03
Caple Service
Fourth Way
Avonmouth
Bristol
BS11 8DW
t: 0117 938 7420
e: service@caple.co.uk
www.caple.co.uk
Please keep this instruction manual for future reference
20
Instruction manual BXC611 BXC911C
BXC611 _ BXC911 v2.indd 20
30/06/2016 14:03
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement