Caple DD606SS Extraction Instruction Manual

Caple DD606SS Extraction Instruction Manual
Instruction manual for downdraft hood
Instruction manual
forDD520BK
downdraft hood
Model code:
Model code: DD606SS DD606BK
Contact Caple on 0844 800 3830 or for spare parts www.4caple.co.uk
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk
seguenze negative per l’ambiente e per la salute, che potrebbero derivare da uno smaltimento inadeguato del prodotto. Per informazioni più dettagliate sul riciclaggio di questo prodotto, contattare l’ufficio
comunale, il servizio locale di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto. Questo
elettrodomestico è marcato conformemente alla Direttiva Europea 2002/96/CE sui rifiuti da apparecchiature elettriche edprotection
elettroniche (WEEE).
Environmental
Il simbolo
o sulla
confezione
indica
che il prodotto
non devemay
essere
considerato
The
symbolsul
onprodotto
the product
or on
its packaging
indicates
that this product
not be
treated as come
house-un
normale
rifiuto
domestico,
ma
deve
essere
portato
nel
punto
di
raccolta
appropriato
per
il
riciclaggio
hold waste. Instead it shall be handed over to the applicable collection point for the recycling of electricaldi
apparecchiature
elettriche By
edensuring
elettroniche.
and
electronic equipment.
this product is disposed of correctly, you will help prevent
Provvedendo a smaltire questo prodotto in modo appropriato, si contribuisce a evitare potenziali conpotential negative consequences for the environment and human health, which could otherwise be
seguenze
negative per l’ambiente
e per of
la salute,
che potrebbero
uno smaltimento
inade- of
caused
by inappropriate
waste handling
this product.
For more derivare
detailed da
information
about recycling
guato del prodotto. Per informazioni più dettagliate sul riciclaggio di questo prodotto, contattare l’ufficio
this product, please contact your local city office, your household waste disposal service or the shop where
comunale, il servizio locale di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto. Questo
you purchased the product. This appliance is marked according to the European directive on waste
elettrodomestico è marcato conformemente alla Direttiva Europea 2002/96/CE sui rifiuti da apparecelectrical and electronic equipment (WEEE).
chiature elettriche ed elettroniche (WEEE).
Le symbole sur le produit ou son emballage indique que ce produit ne peut être traité comme déchet
TheDeclarations
symbol on the product
or on its packaging indicates that this product may not be treated as houseCE
of Conformity
ménager.
Il doit plutôt être
remis au point de ramassage concerné, se chargeant du recyclage du matériel
hold waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical
électrique
et électronique.
vous assurant
que ceisproduit
est of
éliminé
correctement,
vous
favorisez
la
and electronic
equipment. En
By ensuring
this product
disposed
correctly,
you will help
prevent
potenThis
appliance
has
been manufactured
to the
strictest
standards et
and
complies
with allqui,
applicable
prévention
des
conséquences
négatives
pour
l’environnement
la
santé
humaine
sinon,
seraient
tial negative consequences for the environment and human health, which could otherwise be caused
legislation,
Low
Directive
(LVD)des
anddéchets
Electromagnetic
Compatibility
Directive
(EMC).
le
d’un Voltage
traitement
inapproprié
de more
ce produit.
Pour
obtenir
plus
de détails
surofle this
rebyrésultat
inappropriate
waste handling
of this product.
For
detailed
information
about
recycling
cyclage
de
ce
produit,
veuillez
prendre
contact
avec
le
bureau
municipal
de
votre
région,
votre
service
product, please contact your local city office, your household waste disposal service or the shop where
d’élimination
desthe
déchets
ménagers
ou le magasin
où vous
avez acheté
produit. Cet
appareil
est comyou purchased
product.
This appliance
is marked
according
to the le
European
directive
2002/96/EC
mercialisé
en
accord
avec
la
directive
européenne
2002/96/CE
sur
les
dèchets
del
équipments
èlectriques
on waste electrical and electronic equipment (WEEE).
et èlctroniques (WEEE).
Le
symboleen
surelleproducto
produit ou
son
indique
que
ce producto
produit nenopeut
être traité
déchet
El símbolo
o en
su emballage
embalaje indica
que
este
se puede
tratarcomme
como desperménager.
Il
doit
plutôt
être
remis
au
point
de
ramassage
concerné,
se
chargeant
du
recyclage
du
matériel
dicios normales del hogar. Este producto debe llevarse al punto de recolección de equipos eléctricos
électrique
et électronique.
En vous
assurant que
produit
est éliminé
vous favorisez
la
y electrónicos
para su reciclaje.
Al asegurarse
dece
que
este producto
secorrectement,
deseche correctamente,
usted
prévention
des
conséquences
négatives
pour
l’environnement
et
la
santé
humaine
qui,
sinon,
seraient
ayudará a evitar posibles consecuencias negativas para el ambiente y la salud pública, lo cual podría
leocurrir
résultat
d’unproducto
traitementnoinapproprié
des déchets
de ceadecuada.
produit. Pour
plus
de détailsmás
sur le
resi este
fuese manipulado
de forma
Paraobtenir
obtener
información
detacyclage
de
ce
produit,
veuillez
prendre
contact
avec
le
bureau
municipal
de
votre
région,
votre
service
llada sobre el reciclaje de este producto, póngase en contacto con la administración de su ciudad, con
d’élimination
des
déchets ménagers
le magasin
vous avez
acheté
le produit.Este
Cet appareil
est comsu servicio de
desechos
del hogar ou
o con
la tiendaoùdonde
compró
el producto.
electrodoméstico
mercialisé
en
accord
avec
la
directive
européenne
2002/96/CE
sur
les
dèchets
del
équipments
èlectriques
está marcado conforme a la directiva Europea 2000/96/CE sobre los residuos de aparatos eléctricos
et
èlctroniques (WEEE).
y electrónicos
(WEEE).
El símbolo
enauf
el producto
o en oder
su embalaje
indica que este
no se
puede
tratar
comonicht
desperDas
Symbol
dem Produkt
seiner Verpackung
weistproducto
darauf hin,
dass
dieses
Produkt
als
dicios
normales
del
hogar.
Este
producto
debe
llevarse
al
punto
de
recolección
de
equipos
eléctricos
normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von
y electrónicos
para
su reciclaje. Al
asegurarse
de quewerden
este producto
se deseche
correctamente,
usted
elektrischen
und
elektronischen
Geräten
abgegeben
muss. Durch
Ihren Beitrag
zum korrekten
ayudará
a
evitar
posibles
consecuencias
negativas
para
el
ambiente
y
la
salud
pública,
lo
cual
podría
Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt
ocurrir
si este producto
fuese
manipulado
de forma
adecuada.
Para
obtener información
detaund
Gesundheit
werdenno
durch
falsches
Entsorgen
gefährdet.
Weitere
Informationen
über dasmás
Recycling
llada
sobre
el
reciclaje
de
este
producto,
póngase
en
contacto
con
la
administración
de
su
ciudad,
dieses Produkts erhalten Sie von Ihrem Rathaus, Ihrer Müllabfuhr oder dem Geschäft, in dem Sie con
das
su servicio
de desechos
del hogar
o con la tienda donde
compró el producto.
Este electrodoméstico
Produkt
gekauft
haben. Dieses
Elektrohaushaltsgerät
ist entsprechend
der EU-Richtlinie
2002/96/CE
está marcado
conforme
a la –directiva
Europea
Über
Elektro- und
Elektronik
Altgeräte
(WEEE).2000/96/CE sobre los residuos de aparatos eléctricos
y electrónicos (WEEE).
Het symbool op het product of op de verpakking wijst erop dat dit product niet als huishoudafval mag
Das Symbol auf dem Produkt oder seiner Verpackung weist darauf hin, dass dieses Produkt nicht als
worden behandeld. Het moet echter naar een plaats worden gebracht waar elektrische en elektronische
normaler Haushaltsabfall zu behandeln ist, sondern an einem Sammelpunkt für das Recycling von
apparatuur wordt gerecycled. Als u ervoor zorgt dat dit product op de correcte manier wordt verwijderd,
elektrischen und elektronischen Geräten abgegeben werden muss. Durch Ihren Beitrag zum korrekten
voorkomt u mogelijk voor mens en milieu negatieve gevolgen die zich zouden kunnen voordoen in geval
Entsorgen dieses Produkts schützen Sie die Umwelt und die Gesundheit Ihrer Mitmenschen. Umwelt
van verkeerde afvalbehandeling. Voor meer details in verband met het recyclen van dit product, neemt u
und Gesundheit werden durch falsches Entsorgen gefährdet. Weitere Informationen über das Recycling
het best contact op met de gemeentelijke instanties, het bedrijf of de dienst belast met de verwijdering
dieses Produkts erhalten Sie von Ihrem Rathaus, Ihrer Müllabfuhr oder dem Geschäft, in dem Sie das
van huishoudafval of de winkel waar u het product hebt gekocht. Dit apparrat voldoet aan de Europese
Produkt gekauft haben. Dieses Elektrohaushaltsgerät ist entsprechend der EU-Richtlinie 2002/96/CE
richtlijnen 2002/96/CE voor elektrische en elektronische afval (WEEE).
Über Elektro- und Elektronik – Altgeräte (WEEE).
Het symbool op het product of op de verpakking wijst erop dat dit product niet als huishoudafval mag
worden behandeld. Het moet echter naar een plaats worden gebracht waar elektrische en elektronische
apparatuur wordt gerecycled. Als u ervoor zorgt dat dit product op de correcte manier wordt verwijderd,
voorkomt u mogelijk voor mens en milieu negatieve gevolgen die zich zouden kunnen voordoen in 3geval
van verkeerde afvalbehandeling. Voor meer details in verband met het recyclen van dit product, neemt u
het best contact op met de gemeentelijke instanties, het bedrijf of de dienst belast met de verwijdering
van huishoudafval of de winkel waar u het product hebt gekocht. Dit apparrat voldoet aan de Europese
richtlijnen 2002/96/CE voor elektrische en elektronische afval (WEEE).
3
4
NOTE
This downdraft extractor is designed to work
in both recirculation mode and ducted with
outside evacuation.
WARNING
Keep these instructions for use with the
Extractor. If the appliance should be sold or
passed on to others, make sure that the
instructions are passed on with it. We thank
you for taking note of these suggestions before
installing and using the appliance. They have
been written for your personal safety and the
safety of others.
SAFTEY INSTRUCTIONS
These hoods have been designed for personal
use in the home. The appliance must be used by
adults. Make sure that the appliance is out of
reach of children and that they do not use it to
play with. Make sure that children do not
operate the controls.
- When the appliance is delivered, check the
overall appearance of the packaging.
Any remarks should be written on the delivery
note, of which you keep a copy.
Your appliance is designed for normal domestic
use. It is not designed for commercial or
industrial use, or for purposes other than those
for which it was designed.
- Any consequesnces of or damage from incorrect
installation or incorrect use of the appliance will
not be covered by the manufacturer’s guarantee.
- Do not ever change or try to change the
characteristics of this appliance. This would be
a danger. Repairs must be performed only by
an authorised Caple technician.
- Always disconnect the hood before carrying
out cleaning or maintenance operations.
- Adequately ventilate the room when a cooker
hood and other appliances, powered by energy
other than electricity, are used simultaneously,
so that the hood does not suck any combustion
fumes.
- Do not cook food over open flames (flambé) or
operate gas hobs without pots or pans on them
while using this extractor (the flames could be
sucked into the hood may damage the
appliance).
- Frying while using this extractor must be done
inder constant supervision as hot oils and fats
may ignite. Respect the guidelines for cleaning
and replacement of grease filters. Accumulated
deposits of grease are a fire hazard.
- This appiance must not be used with cooktops
powered by wood or coal or in any case, over
cook tops with power levels that could damage
the appliance.
- Never use steam or high-pressure devices for
cleaning your hood (regulations regarding
electrical safety). .
- Never use the extractor without the grease
filters fitted.
- The minimum distance between the
Downdraft extractor (closed) and the surface
above must be at least 400mm
- When handling the Downdraft, never put your
hands in the field of action of the extractable
unit. Do not touch any moving parts.
- There must be a minimum space of 50mm
between the edge of a gas hob and the
downdraft frame.
Constantly seeking to improve our products, we
reserve the right to modify their technical,
functional, or aesthetic characteristics deriving
from their upgrading.
In the case of the version with external
motors, for normal downdraft operation, it is
necessary to use a external motor made by
Caple.
The air collected must not be conveyed into a
flue used for smoke or fumes from appliances
powered by anything other than electricity (e.g.
central heating systems, etc.). As far as
discharging exhaust air is concerned, please
follow the guidelines given by competent
authorities.
5
Contents
Dimensions
7
Installing the extractor
8
Removing the grease filters and installing the charcoal filters
9
Electrical connection
10
How the downdraft extractor works
11
Cleaning the extractor
13
Troubleshooting
14
Aftersales service
14
Images (fig.1 to Fig.13)
15
6
Dimensions
INC
Note: The Downdraft worktop cutout can be connected to the hob cutout,
but only for electric hobs.
For gas hobs, a minimum 50mm gap must be left beetween the edge of
the gas hob and the downdraft frame
7
Installing the extractor
1. Before carrying out the appliance
installation, please check that all
components are not damaged, in such a
case contact your retailer and do not
continue with the installation operation.
Before the installation of the
Downdraft, please remove the safety piece
you can see in the picture (Fig. 1).
Furthermore, please read carefully all of the
following installation instructions.
- Use an air exhausting pipe/ducting not
exceeding a maximum lenght of 5 meters
- Do not use flexible ducting
- Limit the number of elbows in the piping, as
each elbow reduces the air capacity of 1 linear
meter. (for example, if you use 2 90 degree
elbows, the length of the piping should not
exceed 3 metres.
- Avoid abrupt direction changes
- Use a 150mm constant diameter ducting pipe
for the whole length (or equal surface area.
- Only use ducting approved by the standards
in force.
The manufacturer shall not be deemed
responsible for air capacity or noise problems
caused by failure to comply with the above
instructions and no warranty on the product
shall be provided.
2. Before making the hole, check that there are
no structural or other parts inside the
cabinet where the appliance is to be
placed, which could hinder the correct
installation. Check that the dimensions of
the Downdraft and the ones of the hob are
compatible with the cabinet so that the
installation can be carried out properly.
3. Make a rectangular opening in the back part
of the cook top (842x100mm for the 90 cm
model and 542x100mm for the 60 cm
model). If the DDMEXT10 is already installed,
remove the screws and the motort in order
to insert the downdraft in the hole made.
8
4. Put the Downdraft in the opening, inserting
it from above as shown in (Fig. 2).
5. Fix the downdraft inside the cabinet, using
the special fixing brackets supplied with the
product (Fig. 3).
Insert the brackets in the lower side of the
downdraft (Fig. 3), in such a way that there
is a 2 mm distance between the lower side
of bracket and the bottom of the cabinet
(Fig. 3).
This distance will allow the traction to be
positioned downwards of the product, at
the moment of fixing, in order to have the
stainless steel trim perfectly adhering with
the work surface. Before inserting the
screws, please make sure that the appliance
is perfectly perpendicular with the work
surface.
6. Once the installation is complete and after
connecting the appliance to the mains
power, lift up the downdraft and remove the
door block (Fig. 4); then open the door
(Fig. 5) and fit the filters in place (Fig. 6). In
the version of the Downdraft using the the
DDMEXT10, install the power unit orienting
the air outlet to the desired position, either
downwards or upwards (Fig. 7).
The motor can be installed either on the front
or rear side of the downdraft. After having
installed the motor, then connect the air
ducts.
7. For versions using an external motor, place
the external motor in a suitable area and fit
the exhaust air flue as illustrated. Then fit
the air outlet ducts between the external
motor and the downdraft. Select an air
outlet from the five possibilities (Fig. 8) and
fit the union supplied with the appliance.
8. Place the metal box containing the wiring in
an easily accessible area to allow maintenance interventions where necessary
(Fig.9). Connect the connectors (9-pole
connector) to control the actuator and
safety control and button pad connector)
(Fig. 10).
Connect the internal or external motor cable to
the terminal board found inside the plastic box
on the downdraft wiring. When performing the
electrical connection, take care to respect the
colours of the electrical wires and connect it
correctly (Fig 14).
Extraction options
This appliance is intended to suck cooking
fumes, greases and small amounts of steam. It
has been designed to work in both a ducted
mode with outside evacuation and recirculating
mode (using charcoal filters).
Ducted - Outside discharge version
The cooker hood can be mounted in the version
with outside discharge for extracted air: in this
case it is necessary to connect the ducting/
exhausting channel to the outside (exhausting
pipes are not supplied with the products.)
Unblock the motor non-return valve if required.
WARNING
Before connecting the air exhaust hose,
make sure that the motor non-return valves
can rotate freely.
Recirulaton mode
In case fumes and vapour cannot be evacuated
outside, the appliance can also be used in
recircualtion mode.
Activated charcoal filters are required for
this type of installation (the DD605 requires
CAP27CF and the DD905 required CAP43CF)
Air recycled through the charcoal filters is
recirculated into the kitchen, thanks to a duct
conveying the air on one side of the cabinet
(Fig.11)
CAUTION
The installation must comply with the
regulations in force regarding the
ventilation of enclosed environments. In
particular, discharged air must not be
conveyed into a duct used for fumes
discharge or discharge from appliances using
gas or other combustible materials. The use
of discontinued ducts is not allowed without
the approval of a qualified technician.
Removing the grease filters and
installing the charcoal filters
The removal and fitting of the grease and
charcoal filters need to be carried out with the
downdraft in the open position. To open the
downdraft, push the '1' key. Then remove the
front panel, pushing the upper part of each side
at the same time. The panel will drop forwards
to make it possible to access the grease filters
(Fig. 6). Remove the grease filters to access the
carbon filters (Fig. 12). The replacement of the
charcoal filters has to be carried out accordingly
to the effective use of the Downdraft, and in any
case they should be replaced at least once every
6 months.
WARNING
In case of outside air discharge installation, fit a
non-return valve to prevent wind and back air
from entering.
After having replaced the filters, reinstall the
front stainless steel panel, otherwise the
Downdraft is not enabled to function.
9
Electrical connection
WARNING
Place the metal box containing the electronic
components at a distance of no less than
65cm from gas operated hobs or in any case,
65cm from the suctioning surface of the
cookerhood.
NOTE
We recommend installing the metal box
containing the electronic components at least
10cm above floor level and at a suitable
distance from all heat sources (e.g. oven sides
or hob).
CAUTION
This appliance is fitted with an H05 VVF 3
conductor, 0.75 mm2 (neutral, phase, and
ground) power cord.
This can be connected up to a 220 - 240 V
monophase electrical network through a
CEI 60083 approved power socket, which
must remain accessible after installation, in
compliance with installation regulations. We
decline any responsibility in case of accidents
caused by a lack of ground connection or
incorrect ground connection. The appliance
must be fed through a differential protection
device (RCD), with a nominal residual current
not exceeding 30mA. If the power cord is
damaged, call the Caple after-sales service to
avoid any risk.
WARNING
The downdraft connection to the electrical
network must be carried out only by
professional and qualified technicians.
The downdraft must be connected to a
properly installed and suitable electrical
network.
The electrical system must comply with
VDE0100 standard.
10
DANGER
If the cooker hood presents any
anomaly, disconnect the appliance or
remove the fuse corresponding to the
appliance power disconnecting line.
If the appliance has no plug or if the plug is not
easily accessible, then a device needs to be
fitted to cut it off from the electric network;
this device must have an opening distance
between contacts on all poles of at least 3 mm.
Electrical connection
While installing the appliance and carrying out
maintenance operation, make sure it is
disconnected from the electrical network or
the fuses are cut out or removed.
Check that:
t The power is enough
t The feeder lines (mains) are in good condition.
t 5IFDBCMFTEJBNFUFSDPNQMJFTXJUIJOTUBMlation
regulations
How the downdraft
extractor works
A: Lower the extraction panel - '0' switch
This serves to close the extraction panel
either completely or in intermediate positions
above 180 mm from the hob. When the
extraction panel is being closed, it will remain
in operation until it reaches 180 mm above
the hob. Below this height, the extraction
function will switch off automatically.
B: Raise the extraction panel,
switch on - Speed 1
This serves to bring the extraction panel up to
a maximum height of 300 mm and to
automatically set the first extraction speed
when the panel reaches a height of 180 mm.
Pressing the button when this height is
reached makes it possible to place the
extraction panel in the required intermediate
positions, up to a maximum of 300 mm,
while leaving the extraction speed of the
motor unchanged.
C: Speed 2 switch
D: Speed 3 switch
E: Speed 4 switch
These serve to set the respective suction
speeds after the extraction panel has reached
180 mm above the hob and to set the height
of the extraction panel to a maximum of
300mm by pressing the same button.
F:
Timer
10 minutes after pressing this button and
setting the function, it serves to stop the
extractor motor and close the carriage. The
set function is signalled by the flashing LEDs
“D” for the set speed. The timer can be
cancelled by press-ing the key again.
Other functions:
Automatic turn off:
After 4 hours of continuous use from the
last function selected, the appliance turns off
and closes automatically.
Grease filters saturation:
After 30 hours of working, the speed
indicators “D” will all flash simultaneously,
signaling the grease filters saturation.
To reset this alarm, hold down the
“TIMER” button for at least 3 seconds,
while the carriage is open.
Downdraft calibration:
Calibration of the downdraft after having
installed it, it is necessary to start the
calibration procedure, which is aimed at
adjusting the extraction strength of the
filtering unit. Connect the product to the
power supply, making sure that it is
conformed to the supply voltage
indicated on the technical data label.
Push the 1 button and the aspiration panel
rises. After it has reached a height of
180mm from the gob, press 0, to stop the
extraction then the 'Timer' and after 2 sec.
the 0 button.
The downdraft will carry out the
calibration of its aspiration panel rising and
retracting for some centimeters. During this
phase, the buttons on the push button
control panel flash. At the end of the
calibration, the aspiration panel return to
the previous position and the buttons stop
flashing. Wait until the aspiration panel
stops moving before re-activating the
extraction.
WARNING
This operation has to be carried out by a
specialised technician.
11
Safety system:
If there is an obstacle present while the
extractable unit is closing, the Downdraft
stops closing and rises again thanks to a
security system to prevent harm.
TIMING
As a result of the new EU65 “Energy label” and EU66 “ Ecodesign” regulations
issued by the European Commission,
which came into force as from January 1st, 2015 , our products have been
adapted to comply with these new requirements. All of the models complying
with the energy label requirements, are
equipped with new electronics including
a timer device for suction speeds control,
when the air capacity exceeds 650m³/h.
Internal motor models, with maximum
air capacity higher than 650m³/h, are
equipped with a timer device that automatically switches the suction speed
from 4th to 3rd speed, after 6 minutes
operation. External motor models are
equipped with remote motors that , as
for internal motor versions, include a
timer device that switches down the
suction speed when it exceeds 650 m³/h.
(See External Motors Instructions ) Remote motors, whose air capacity exceeds
650m³/h at both 4th and 3rd speed ,
will have the following by default timer
control functions: The suction speed is
automatically switched from 4th to 2nd
speed, after 6 minutes operation. If the
appliance is working at 3rd speed, it is
automatically switched to 2nd speed
after 7 minutes operation. Operation
speeds can also be changed during operation. The energy consumption of the
appliance in stand – by mode is lower
than 0.5W.
12
Cleaning the extractor
Careful maintenance helps to ensure the correct operation and good performance over time.
CAUTION
The hood must be disconnected from the electrical network, both by unplugging the appliance from
the socket and activating the magnetic circuit breaker (safety cut-out), before removing the metal
grease filters. After cleaning, replace the metal grease filters as outlined in the installation
instructions.
MAINTENANCE
External surfaces and
accessories
Grease filter with
extractable unit open
Active charcoal filter
ADDITIONAL PRODUCTS TO
USE
Do not use metallic scrubbers,
To clean the external surfaces of the
abrasive products or hard brushes.
cooker hood and the light housing
screen use only commercially available household detergents diluted
in water. Then rinse with clean
water and dry with a soft cloth.
After 30 hours of operation,
The grease filters can be washed by
the downdraft will signal the grease hand or in the dishwasher. These
filter saturation.
filters need to be cleaned on a
The saturation is signaled by the regular basis, because otherwise
blinking of the 4 central leds.To
they may represent a fire risk.
reset, hold down the timer button
Refit the grease filters and
for at least 3 seconds, while the front panel, making sure that the
panel is properly fitted at the sides,
carriage is open.
otherwise it may cause the
downdraft to stop operating.
In the recirculation mode, the
active charcoal filter must be
replaced periodically. To remove the
charcoal filter first of all it is
necessary to remove the grease
filter and then pull the plastic key
of the panel itself, in order to
disengage it from its seating.
Follow these steps in reverse order to
insert the active charcoal filter.
Replace the used charcoal filter on
an average of every six months.
HOW TO PROCEED?
13
Troubleshooting
PROBLEM
The extractor
does not work
The extractor has
poor performance
The extractor stops in
the middle of
operation.
SOLUTION
Check that:
t 5IFSFJTOPUBQPXFSPVUBHF
t "TQFDJGJDTQFFEIBTBDUVBMMZCFFOTFMFDUFE
t 5IFQPMFDPOOFDUJPOJTJOTFSUFEQSPQFSMZ
t 5IFSFESFTFULFZ GPVOEPWFSUIFFMFDUSJDBMTZTUFNCPY JTQVTIFE
t .BLFTVSFUIBUUIFXJSFTPGUIFQPMFDPOOFDUJPOBSFJOTFSUFEQSPQerly in the connector itself (during the connection phase, an
excessive pressure could bend the contacts).
Check that:
t 5IFNPUPSTQFFETFMFDUFEJTTVGGJDJFOUGPSUIFRVBOUJUZPGGVNFTBOE
vapors present in the room.
t 5IFLJUDIFOJTWFOUJMBUFEXFMMFOPVHIUPBMMPXBJSGPSJOUBLF
t 5IFDIBSDPBMGJMUFSJTOPUXPSOPVU GJMUFSJOHWFSTJPODPPLFSIPPE t 5IFBJSPVUMFUDIBOOFMJTGSFFBOEDPNQMJBOUXJUIQBSBHSBQIOP
t 5IFOPOSFUVSOWBMWFTPGUIFmotorVOJUBSFGSFFUPSPUBUF
Check that:
t 5IFSFJTOPUBQPXFSPVUBHF
t 5IFPNOJQPMBSEFWJDFIBTOPUUSJQQFE
Aftersales service
Any service or repairs should be carrier out by a qualified person, please contact Caple Service
either by telephone 0117 938 7420 or by email service@caple.co.uk
NOTE
When contacting Caple Service, please provide the appliance details shown on the appliance labels
(Type Fig.13-A and equipment Fig.1-B and also the production date Fig.13-C).
This information is stated on the rating label and the production date is placed on the lower side
of the downdraft.
14
IMAGES
15
2 mm
16
1
2
3
4
5
6
7
8
9
10
11
12
17
A
10/09
90002103999
N
220 - 240V - 50 HZ
ATTUATORE
12Vcc 68W
B
68W
TYPE
EQUIPMENT
FSEE
S - 002 - EM_TC X22 - Q3 - X0
B
90002002001
MAX
C
13
14
18
19
Serial number
Caple
Fourth Way
Avonmouth
Bristol
BS11 8DW
www.caple.co.uk
90000256600
GM
04/2015
00000000000
03/2014
90002020422 -- GMGM
02/2014
90002020422
02/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement