Caple C2401GM Oven Instruction Manual

Add to my manuals
28 Pages

advertisement

Caple C2401GM Oven Instruction Manual | Manualzz
Sense single pyrolytic oven
Instruction manual
C2401GM
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk
CONTENTS
Safety Warnings
3
Installation
12
Oven Dimensions
13
Electrical Connection
14
Control Panel and Display
15
Accessories
15
Operation
16
Temperature Settings
17
Demo Mode
19
Pyrolytic Cleaning
20
Replacing the oven lamp
22
Troubleshooting
23
Removing The Oven Door
24
Removing The Glass Panels
25
Telescopic runners
26
Technical Fiche
27
Please keep this instruction manual for future reference
2
Instruction manual C2401GM
SAFETY INSTRUCTIONS
Read these instructions carefully and completely
before using your appliance, keep it in a
convenient place for reference when necessary.
--This appliance can be used by children aged from 8 years
and above.
--Persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge
must be supervised and given appropriate instruction
concerning the use of the appliance in a safe way and
understand the hazards involved.
--Children shall not play with the appliance.
--Cleaning and user maintenance should not be carried
out by children without supervision.
--The appliance is not intended to be operated by means
of an external timer or separate remote control system.
Please keep this instruction manual for future reference
Instruction manual C2401GM
3
WARNING:
--The appliance and its accessible parts become hot
during use. Care should be taken to avoid touching
heating elements.
--Children less than 8 years of age should be kept away
unless continuously supervised.
--To prevent fire hazards do not store items on the
cooking surfaces.
--During use, handles can get hot.
--Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass or any other
surface of the appliance as it can scratch the surface
which may result in the glass shattering or permanent
damage to the surface.
--Do not use steam cleaners for cleaning the appliance.
--Ensure the appliance is switched off before replacing the
lamp to avoid the possibility of electric shock.
Please keep this instruction manual for future reference
4
Instruction manual C2401GM
CAUTION:
--Accessible parts may be hot when the cooking or grilling
is in use. Young children should be kept away.
--Your appliance is produced in accordance with all
applicable local and international standards and
regulations.
--Maintenance and repair work must be made only
by authorised Caple service technicians. Installation
and repair work that is carried out by unauthorised
technicians may endanger you.
--It is dangerous to alter or modify the specifications of the
appliance in any way.
--Prior to installation, ensure that the local distribution
conditions (electricity voltage and frequency) and
the requirements of the appliance are compatible.
The requirements for this appliance are stated on the
rating label.
--This appliance is designed only for cooking food and
is intended for indoor use.
Please keep this instruction manual for future reference
Instruction manual C2401GM
5
--This product is not designed for commercial use, it is
a household appliance only. It is not intended to be
used in:
- Staff kitchen areas in shops, offices and other working
environments.
- Bed and breakfast type environments.
- By clients in hotels, motels and other residential type
environments.
--Do not try to lift or move the appliance by pulling the
door handle.
--All possible security measures have been taken to ensure
your safety. Since the glass may break, you should be
careful while cleaning to avoid scratching.
--Avoid hitting or knocking on the glass with accessories.
--Ensure that the supply cord is not wedged during the
installation. If the supply cord is damaged, it must
be replaced by a Caple service technician or similarly
qualified persons in order to prevent a hazard.
--While the oven door is open, do not let children climb on
the door or sit on it.
Please keep this instruction manual for future reference
6
Instruction manual C2401GM
INSTALLATION WARNINGS
--Do not operate the appliance before it is fully installed.
--The appliance must be installed by an authorised
technician.
--Caple is not responsible for any damage that may
be caused by defective placement and installation by
unauthorised persons.
--When unpacking the appliance, make sure that it is
not damaged during transportation. In the case of any
defect; do not use the appliance and contact your retailer
or Caple Service immediately.
--Materials used for packaging (nylon, staplers, styrofoam
etc) may cause harmful effects to children they should be
disposed of immediately.
--Protect your appliance against atmospheric effects. Do
not expose it to effects such as sun, rain, snow etc.
--The surrounding materials of the appliance (i.e. kitchen
cabinet or furniture) must be able to withstand a
minimum temperature of 120°C.
Please keep this instruction manual for future reference
Instruction manual C2401GM
7
DURING USAGE
--Before using the oven for the first time, heat the empty
oven at max. temperature for 1 hour – removing any
unpleasant smells and smoke caused by working
residues and thermal insulation. Make sure you do this
in a well ventilated area.
--During usage, the outer and inner surfaces of the oven
get hot. While opening the oven door, step back to avoid
the hot steam coming out of the oven as there may be a
risk of burns.
--Do not put flammable or combustible materials in or
near the appliance when it is operating.
--Always use oven gloves to remove and replace food in
the oven.
--Pay close attention to the oven while cooking with solid
or liquid oils as they could potentially catch fire when
oven is hot.
--Never pour water on flames that are caused by oil. Cover
the saucepan or frying pan with its lid in order to choke
the flame and turn the oven off.
--If you know you will not be using the appliance for a
while switch it off from the main supply and unplug it.
--The oven shelves and trays incline when pulled out. Be
careful not to let hot liquid spill over.
Please keep this instruction manual for future reference
8
Instruction manual C2401GM
--When the door of the oven is open, do not leave
anything on it. It may unbalance your appliance or
damage the door.
--Do not put anything heavy, flammable or ignitable
(nylon, plastic bag, paper or cloth etc) into the oven. This
includes cookware with plastic accessories (e.g. handles).
Do not hang towels, dishcloths or clothes from the
appliance or its handles.
--Do not use the oven for storage purposes.
--Do not touch the appliance with wet hands.
--Do not obstruct the ventilation openings.
--Do not allow supply cords from other small appliances to
come into contact with the oven.
DURING CLEANING AND MAINTENANCE
--Always switch off the appliance from the mains isolating
the electrical supply before any cleaning or maintenance.
--To maintain the efficiency and safety of your appliance,
we recommend you always use original spare parts and
to call only our authorised Caple Service agents in case
of need.
Please keep this instruction manual for future reference
Instruction manual C2401GM
9
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.
This appliance is marked according to the European directive on Waste Electrical
and Electronic Equipment (WEEE). By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. The symbol on the product indicates that this
product may not be treated as household waste. Instead it shall be handed over
to the applicable collection point for the recycling of electrical and electronic
equipment. Disposal must be carried out in accordance with local environmental
regulations for waste disposal.
For more detailed information about treatment, recovery and recycling of this
product, please contact your local council, your household waste disposal service
or the retailer where you purchased the product.
WARRANTY
Your new appliance is covered by warranty. The warranty card is enclosed - if it is
missing, you must provide the following information to your retailer in order to
receive a replacement: date of purchase, model and serial number. Registration can
also be completed online by visiting www.caple.co.uk.
Ensure you keep your warranty card safe, you may need to show it to Caple Service
together with proof of purchase.
If you fail to show your warranty card you will incur all repair charges.
Spare parts are only available from Caple Service and spare parts authorised centres.
Please keep this instruction manual for future reference
10
Instruction manual C2401GM
ATTENTION
Before use, remove all plastic films protecting some parts of the appliance (fascia panel, parts in stainless steel, etc)
Do not use the appliance to heat a room.
When the appliance is not in use, we recommend you turn it off, and isolate it from
the electrical supply.
CE DECLARATIONS OF CONFORMITY
This appliance has been designed, constructed and marketed in compliance with
safety requirements in force. This appliance has been manufactured to the strictest
standards and complies with all applicable legislation.
Please keep this instruction manual for future reference
Instruction manual C2401GM
11
Installation should be carried out according to the instructions by a
professionally qualified person only.
The manufacturer declines all responsibility for
any damage to persons, animals or materials due to incorrect installation.
Fitting the appliance
INSTALLATION
Fit the appliance into its surround (beneath a worktop or above
another appliance) by inserting screws and plastic covers into the 2
IMPORTANT:
INSTALLATION
(A - fig.3) that can be seen in the frame of the oven when the door
ISOLATE holes
YOUR
OVEN FROM THE ELECTRICAL SUPPLY BEFORE PERFORMING
is
open.
IMPORTANT:
INSTALLATION
OR MAINTENANCE.
Fig.2
ISOLATE YOUR OVEN FROM THE ELECTRICAL SUPPLY BEFORE PERFORMING
Installation
should
be carried
out
according
to the instructions by a professionally
For
the
most
efficient
air
circulation,
the
oven
should
be
fitted
INSTALLATION OR MAINTENANCE.
qualified person only.
according to the dimensions
shown
in fig. 1 &out
2. according to the instructions by a professionally
Installation
should be
carried
The manufacturer
declines
all responsibility for any damage to persons, animals or
qualified
only.
The rear panelperson
of the cabinet
must be removed so that air can
materials due to incorrect installation.
circulate
freely. The panel todeclines
which the oven
fitted should
The
manufacturer
all isresponsibility
for any damage to persons, animals or
materials
incorrect
have a gap of due
at leastto
70 mm
at the rear installation.
for ventilation (fig.4 & fig.5).
FITTING THE APPLIANCE
See below for full dimensional drawings of your oven to help with
FITTING
THE APPLIANCE
installation.
Fit the appliance into its surround (beneath a
Fit the
appliance
intoappliance
its surroundin(beneath
worktop or
above
another
a tall a
worktop
or
above
another
appliance
in
tall
NOTE:
where
ovens
are
to
be
matched
with
hobs,
it isa essential
housing) by inserting screws and plastic covers
housing)
by
inserting
screws
and
plastic
covers
follow the
in thebe
manual
supplied
into the 2toholes
(Ainstructions
- fig.3)contained
that can
seen
in with
into the 2 holes (A - fig.3) that can be seen in
the framethe
ofhob
the
oven
when
the
door
is
open.
the
frame of the oven when the door is open.
Fig.3
Plastic cover
For the most
efficient
air circulation,
the oven
For the
most efficient
air circulation,
the oven
Oven
dimensions
fitted according
the dimensions
should beshould
fittedbe
according
to thetodimensions
shown in shown
fig. 1 in
& fig.
2. 1 & 2.
The rear panel of the cabinet must be removed so that air can circulate freely. The
The rear panel
of the cabinet must be removed so that air can circulate freely. The
panel to which the oven is fitted should have a gap of at least 70 mm at the rear
panel to which
the oven
is &
fitted
for ventilation
(fig.4
fig.5).should have a gap of at least 70 mm at the rear for
ventilation Dimensions
(fig.4 & fig.5).
70mm
D I M E N S IDimensions
Fig.
1 ONS
70mm
Fig. 2
DIMENSIONS
70mm
70mm
mm
560
20m
m
mm
min
mm
60in
5m
550
m
min mm 70m
550m
m
20mm
555
min
20mm
5578mm
50m
m
116mm
m
m
593mm
m
m
70m
min
550
m
m
70m
m
mm
min
550
mm
560
116mm
593mm
540 m
mmm
540m 5m
m
589mm
5m
540 m m
mm
59m5 m
m
mm
595
m
70m
mm
560
min
550m
m
70m
min
20m
m
550m
m
116mm
116mm
5mm
595
m
25mm
5mm
mm
595
m
Instruction manual
Please keep this instruction manual for future reference
12
Instruction manual C2401GM
25mm
5mm 5
593mm
593mm
116mm
5mm
40m
m
25mm
mm
540m
540m
540
mm
25mm
12
m
116mm
20mm
mm
555
m
25mm
25mm
25mm
540m 5mm
m
mm
595
595
20m
mm
578mm 578mm
555
578mm
578mm
mm
555
20m
593mm
116mm
593mm
589mm
5m
550m
20m
116mm
578mm
mm
555
mm
560
578mm
m
70m
m
70m
m
70m
589mm
578mm
589mm
mm
560
589mm
593mm
mm m
555 560m
589mm 5
589mm
mm
555
593mm
mm
555
m
60m
589mm
m
mm595m
595
25mm
See
Seebelow
belowforforfull
fulldimensional
dimensionaldrawings
drawingsofofyour
yoursteam
steamoven
oventotohelp
helpwith
with
See
below for full dimensional drawings of your oven to help with installation.
installation.
installation.
For a built-in oven to work well the cabinet must be of the right type.
For
Fora panels
abuilt-in
built-in
steam
steam
oven
oventotowork
work
well
wellthe
thecabinet
cabinet
mustbe
beofofthe
theright
righttype.
type. when
The
of
the adjoining
furniture
should
bemust
heat
resistant.
Particularly
the adjoining furniture is made of veneered wood, the adhesives should be able
The
Thepanels
panelsofofthe
theadjoining
adjoiningfurniture
furnitureshould
shouldbebeheat
heatresistant.
resistant.Particularly
Particularlywhen
when
to withstand a temperature of 120ºC. Plastic materials or adhesive which cannot
the
theadjoining
adjoiningfurniture
furnitureis ismade
madeofofveneered
veneeredwood,
wood,the
theadhesives
adhesivesshould
shouldbebeable
able
withstand
this
temperature
may
become
deformed
ororadhesive
unstuck.
to
towithstand
withstand
a atemperature
temperatureofof
120ºC.
120ºC.
Plastic
Plastic
materials
materialsor
adhesivewhich
whichcannot
cannot
withstand
withstandthis
thistemperature
temperaturemay
maybecome
becomedeformed
deformedororunstuck.
unstuck.
To comply with safety regulations, once the appliance has been fitted it should not
be
possible
to safety
make
contact
withonce
the the
electrical
parts.
To
Tocomply
complywith
with
safetyregulations,
regulations,
once
theappliance
appliance
has
hasbeen
beenfitted
fittedit itshould
should
not
notbebepossible
possibletotomake
makecontact
contactwith
withthe
theelectrical
electricalparts.
parts.
All parts which offer protection should be fixed in such a way that they cannot be
removed
without
the
use of ashould
tool.
All
Allparts
partswhich
whichoffer
offer
protection
protection
shouldbebefixed
fixedininsuch
sucha away
waythat
thatthey
theycannot
cannotbebe
removed
removedwithout
withoutthe
theuse
useofofa atool.
tool.
OVEN DIMENSIONS
PRODUCT
PRODUCTDIMENSIONS
DIMENSIONS
555mm
540mm
467mm
578mm
593mm
116mm
20mm
20mm
595mm
20mm
5mm
5mm
540mm
565mm
Please
Please
keep
keep
thisthis
instruction
instruction
manual
manual
forfor
future
future
reference
reference
Instruction
Instructionmanual
manual
1313
Please keep this instruction manual for future reference
Instruction manual C2401GM
13
ELECTRICAL CONNECTION
WARNING: THIS APPLIANCE MUST BE EARTHED
Check that the power rating of the mains supply is suitable for the maximum power
of the appliance as indicated on the rating label.
The fuse rating for this appliance is 20amp.
The appliance is supplied with a mains lead it should be “Hard wired” as follows:
The “yellow/green” earth wire, which must be connected to a terminal, and has to
be about 10mm longer than the other wire.
The neutral wire has to be connected to the terminal marked with a letter N.
The Live wire should only be connected to the terminal marked L.
Mains connection can also be made by fitting a double pole switch with a minimum
gap between the contacts of 3mm, proportionate to the load and complying with
the regulations in force.
The yellow/green earth wire should not be controlled by the switch.
When a double pole switch is used for mains supply connection it should be easily
accessed, once the appliance is in position.
IMPORTANT:
The mains supply cable should be positioned so that it is never subjected to
temperatures which are more than 50ºC above ambient temperature.
The electrical safety of the appliance can only be guaranteed when it has been
correctly connected to a properly earthed mains electrical supply, as laid down in
the current regulations for electrical safety.
The manufacturer cannot be held responsible for any damage to persons or objects
due to lack of an earth connection.
The ovens are designed to operate with a mono-phase alternating current of
220-240V, 50Hz.
Before the installation of the appliance, check the specifications on the
rating label.
Please keep this instruction manual for future reference
14
Instruction manual C2401GM
CONTROL PANEL AND DISPLAY
11
1
12 13
2
Button Description
1. Power (on/off)
2. Up
3. Down
4. Light
5. Timer/Alarm
6. Information
7. Decrease (-)
8. increase (+)
9. Boost
10. Select
14
3
17 16
4
18
15
5 19
21
6 20
7
22
8
23
9
10
Display description
11. Programme
12. Defrost
13. Light
14. Pyrolytic cleaning
15. Time
16. Cooking time
17. End time
18. Time setting
19. Alarm
20. Pyro lock
21. Child safety lock
22. Temperature
23. Boost
ACCESSORIES
2 x Chrome oven shelves
1 x Grill pan with rack and handle
2 x Telescopic runners ( x2 pairs )
To purchase additional or replacement accessories, please visit www.caple.co.uk
Please keep this instruction manual for future reference
Instruction manual C2401GM
15
OPERATION
Press the power button to turn on the oven, and then press the UP & DOWN
buttons to toggle through the different functions.
Press the SELECT key to confirm a function, otherwise temperature zone will keep
flashing, to remind you to confirm the setting
Defrost
Full grill
Pyrolytic cleaning
Eco grill
Fan heat and grill
Turbo grill
Turbo base heat
Base heat
Conventional heat
Turbo conventional heat
Fan heat
Please keep this instruction manual for future reference
16
Instruction manual C2401GM
TEMPERATURE SETTING
Once a function has been selected, press the + / - buttons to adjust the set
temperature and SELECT to confirm this.
The selected temperature is displayed in the right hand screen. The special heating
symbol displays on this screen to show the oven is heating up, and will disappear
when the oven reaches the set temperature.
The temperature can be checked by pressing the“info” key, the real temperatures
will show in display panel for 3 seconds, and then back to set temperature.
There are 5 temperature strips shown below the set temperature in the display
panel during heating. Every strip shows 20% of set temperature reached.
INFO SETTING
Press the INFO key for 5 seconds to start info setting. Press + / - buttons to select
mode.
Press SELECT key to confirm setting.
Mode
Info
1
2
3
1
Time display
always
Only show
when oven on
2
Audio signal
short
medium
long
3
Brightness setting
weak
medium
strong
4
Beep to start chosen function
no
yes
TIME SETTING
Time zone can show “time, cooking time, end of cooking time and alarm” in this
sequence,
Time
Alarm
Duration time
End of cooking time
Please keep this instruction manual for future reference
Instruction manual C2401GM
17
Press setting
the
button until the alarm symbol
flashes. Then press the + / Alarm
Press the
button
until
the
alarm
symbol
flashes.
press
+ / -set the time
buttons
to set the time, and SELECT to confirm. ToThen
cancel
thethe
alarm,
Alarm
setting
Press
the
button
until
the
alarm
symbol
flashes.
Then
press
the
+/buttonstoto'0:00'
set
the
and SELECT to confirm. To cancel the alarm, set the
time
Alarm
setting
andtime,
confirm.
Alarm setting
buttons
to setbutton
the time,
to confirm.flashes.
To cancel
thepress
alarm,the
set+ the
Press
theconfirm.
untiland
theSELECT
alarm symbol
Then
/ - time
to '0:00'
and
Press
button
until
the
alarm
symbol
Then press
the + / setting
Alarm
setting
toAlarm
'0:00'
and
confirm.
buttons
to
setthe
the
time,
andthe
SELECT
confirm.
Toflashes.
cancelflashes.
the alarm,
Press
the
button
until
alarmto
symbol
Then
press set
the the
+ / -time
buttons
to
set
the
time,
and
SELECT
to
confirm.
To
cancel
the
alarm,
set the t
Alarm
setting
to
'0:00'
and
confirm.
buttons
to set
the
time,until
and the
SELECT
to symbol
confirm. Toflashes.
cancel the
alarm,
set
Time
setting
ALARM
SETTING
Press
the
button
alarm
Then
press
thethe
+ /time
-flashes
Alarm
setting
Press
the
button
until
the
alarm
symbol
Alarm
setting
to
'0:00'
and
confirm.
Time setting
tobuttons
'0:00' and
confirm.
to
set
the
time,
and
SELECT
to
confirm.
To
cancel
the
alarm,
set
the
time
Press
the
button
until
theturn
alarm
Then
press
+not
/ - select
buttons
to press
set
the
and
SELECT
to
confirm.
To
canc
Press
the set
button
until
the alarm
symbol
flashes.
Then
thewith
+flashes.
/time,
- the
Time
setting
Press
the
button
until
the
symbol
flashes.
Then
press
the
- buttons
Press
the
button
until
alarm
symbol
flashes.
Then
++ //the
-(do
To
or
change
the
time,
thesymbol
oven
on
power
key
a
to
'0:00'
and
confirm.
buttons
to
set the
time,
and
SELECT
toand
confirm.
To
cancel
the
alarm,
set
the
time
To
set
or
change
the
time,
turn
the
oven
on
with
the
power
key
(do
not
select
a
buttons
to
set
the
time,
SELECT
to
confirm.
To
cancel
the
alarm,
set
the
time
to
'0:00'
and
confirm.
to set
the
time,
and
SELECT
to
confirm.
To
cancel
the
alarm,
set
the
time
to
‘0:00’
buttons
to
set
the
time,
and
SELECT
confirm.
To
cancel
the
alarm,
set
the
time
Time
setting
function).
button twice to start the time setting. press the + / to '0:00'
and confirm.Press the
Time
setting
To'0:00'
set
orand
change
the
time,twice
turn the
oventhe
ontime
withsetting.
the power
keythe
(do+ not
function).
Press
button
start
press
/ - select a
to
confirm.
Alarm
setting
and
confirm.
to
'0:00'
and
confirm.
Time
setting
buttons
tothe
change
the time
andtoSELECT
to confirm.
function).
Press
twice
toon
start
thethe
time
setting.
theselect
+/-a
To
set
or change
time,button
turn
the
oven
with
power
key press
(do not
buttons
to change
thethe
time
SELECT
to
TimeTime
setting
When
the
oven
is firstand
turned
onalarm
or confirm.
restarts,
theontime
must
be repress
set.
Presssetting
the
button
until
the
symbol
flashes.
the
+/To
set
orthe
change
the time,
turn
the
oven
with
theThen
power
key
(do
TIME
SETTINGS
Time
setting
buttons
to
change
the
time
and
SELECT
to
confirm.
function).
Press
button
twice
to
start
the
time
setting.
press
the
+
/ -notasele
To
set
or
change
the
time,
turn
the
oven
on
with
the
power
key
(do
not
select
When
the
oven
is
first
turned
on
or
restarts,
the
time
must
be
re
set.
set buttons
or change
the
time,
turn
thetime,
oven
onand
with the
power key
(do
not
select
a the
setting
to
set
the
SELECT
to
confirm.
To
cancel
the
alarm,
set
the
function).
Press
the
button
twice
to
start
time
setting.
press
thetime
+/TimeToTime
setting
When
the
oven
is the
first
turned
on
orsetting.
restarts,
the
must
re select
set.
Alarm
setting
buttons
to
change
time
and
SELECT
topress
confirm.
function).
Press
the
twice
to
start
the
time
setting.
press
/- a
function).
Press
the
button
twice
tobutton
start
the
time
the
+power
/ -time
To set
or
change
the
time,
turn
the
oven
on
with
the
(dobe
not
a +with
To
set
or
change
the
time,
turn
the
oven
on
with
thekey
power
key
(dothe
not
select
To
set
or
change
the
time,
turn
the
oven
on
the
p
to
'0:00'
and
confirm.
buttons
to
change
the
time
and
SELECT
to
confirm.
buttons
to change
the
time
and
SELECT
tothe
confirm.
Cooking
time
(0
-first
10
hrs)
the
button
until
alarm
symbol
flashes.
Then
press
the
+setting.
/key
-be
When
the
oven
isthe
turned
on
or
restarts,
the
time
must
re
buttons
to
change
the
time
and
SELECT
to
confirm.
function).
Press
the
button
twice
to
start
the
time
setting.
press
the
+set.
/ - abuttons
To
set
orPress
change
time,
turn
the
oven
on
with
the
power
(do
not
select
a/ - time
function).
Press
the
button
twice
to
start
the
time
press
the
+
To
set
or
change
the
time,
turn
the
oven
on
with
the
power
key
(do
not
select
When
the
oven
is
first
turned
on
or
restarts,
the
time
must
be
re
set.
function).
Press
the
button
twice
to
start
the
Cooking
time
(0
- 10to
hrs)
When
the
first
turned
on To
orcancel
restarts,
the
must be re set.
buttons
set oven
the time,isand
to confirm.
the alarm,
settime
the time
to
change
the
time
and
SELECT
toSELECT
confirm.
When
the
oven
isconfirm.
first
turned
on
or
restarts,
the
timesetting.
must
be
re
function).
Press
the
button
twice
toto
start
time
press
the
+ /confirm.
function).
Press
the
button
twice
to
start
the
time
setting.
press
the
+ /set.
- to
buttons
to
change
the
time
and
SELECT
to the
confirm.
to
'0:00'
and
buttons
change
the
time
and
SELECT
Cooking
time
(0
10
hrs)
Press
the
button
to
select
the
cooking
time
function.
The
symbol
will keep
When
the
oven
is
first
turned
on
or
restarts,
the
time
must
be
re
set.
buttons
to
the
time
and
SELECT
to confirm.
buttons
to
change
thetotime
and
SELECT
to or
confirm.
Cooking
time
(0setting
- 10change
hrs)
When
the
oven
isselect
first
turned
on
restarts,
the
time
must
be
re
set.
Time
Press
the
button
the
cooking
time
function.
The
symbol
will
keep
When
the
oven
is
first
turned
on
or
restarts,
the
time m
Cooking
time
(0
10
hrs)
flashing
and
the
time
will
show
'0:30'.
Press
the
+ /be
- buttons
to
set the required
When
the
oven
is
first
turned
on
or
restarts,
the
time
must
be
rethe
set.
When
the
oven
is
first
turned
on
or
restarts,
the
time
must
retoset.
Time
setting
Cooking
time
(0
- select
10
hrs)
Press
the
button
to
the
cooking
time
function.
The
symbol
will
keep
Press
the
button
to
select
the
cooking
time
function.
The
symbol
will
keep
flashing
and
the
time
will
show
'0:30'.
Press
the
+
/
buttons
set
required
COOKING
TIME
(0
10
HRS)
Cooking
time
(0
- 10'0:30'.
hrs)Press
cooking
time
and
totheconfirm.
Alarm
setting
To
or
change
the
time,
turn
the
oven
on
with
power
(do not
flashing
and set
theTo
time
will
showSELECT
+ / oven
- buttons
to set
the
required
setSELECT
or
change
the
time,
turn the
on with
the
power
not select
flashing
and
the
time
show
'0:30'.
Press
the
+key/ (do
- the
buttons
set
the
required
Press
the
button
towill
select
the
cooking
time
function.
The ato key
symbol
willselect
keep a
cooking
time
and
to
confirm.
cooking
time
and
SELECT
to
confirm.
Cooking
time
(0
10
hrs)
if
you
want
to
cancel
the
cooking
set
the
time
and
press
Press
the
button
until
theselect
alarm
symbol
flashes.
Then
press
the
+10
/cooking
- the
function).
Press
the
button
twice
totime,
start
the
time
setting.
press
the
+ setting.
/symbol
- to '0:00'
Press
the
button
to
select
the
cooking
time
function.
The
symbol
function).
Press
the
button
twice
to
start
time
press
the
+
/ - will
Press
the
button
to
the
cooking
time
function.
The
will
keep
Cooking
time
(0
hrs)
cooking
time
and
SELECT
tothe
confirm.
if
you
want
toand
cancel
the
cooking
time,
set
cooking
time
toalarm,
'0:00'
andthe
flashing
the
time
will
show
'0:30'.
Press
the
+press
/time
- buttons
the
required
Press
the
button
tototime
select
the
cooking
time
function.
Theto set
symbol
will keep
ifCooking
you
want
to
cancel
the
cooking
time,
set
the
cooking
time
to '0:00'
and
press
time
(0
-time,
10
hrs)
Cooking
time
(0
-change
10
hrs)
buttons
to set
the
and
SELECT
confirm.
To
cancel
set
buttons
to
the
and
SELECT
to the
confirm.
SELECT
to
confirm.
flashing
and
the
time
will
show
‘0:30’.
Press
the
+
/
buttons
to
set
the
required
flashing
and
the
time
will
show
'0:30'.
Press
the
+
/
buttons
to
set
the
requir
buttons
to
change
the
time
and
SELECT
to
confirm.
SELECT
toand
confirm.
tocooking
'0:00'
confirm.
Whento
thecancel
oven
is first
turned
on or'0:30'.
restarts,
the
time
mustcooking
ifPress
you
want
the
time,
set
the
timeThe
to '0:00'
and
press
time
and
SELECT
tocooking
confirm.
flashing
and
the
time
will
show
Press
the
+befunction.
/re- set.
buttons
set the
required
SELECT
to
confirm.
the
button
to
select
the
cooking
time
symbol
will
keep
Press
the
button
to
select
the
cooking
time
functio
cooking
time
and
SELECT
to
confirm.
If
you
want
to
cancel
the
cooking
time,
set
cooking
time
and
SELECT
to
confirm.
When
the
oven
isthe
first
turned
ontime
orset
restarts,
the
must
be
set.
Press
the
button
to
select
the
cooking
function.
Thetime
symbol
willrekeep
Press
the
button
to
select
the
cooking
time
function.
The
symbol
will
keep
SELECT
to
confirm.
End
of
cooking
time
if
you
want
to
cancel
cooking
time,
the
cooking
time
to
'0:00'
and
press
cooking
time
and
SELECT
to
confirm.
flashing
and
the
time
willpress
show
'0:30'.
the +will
/ - buttons
to setPress
the required
theTime
cooking
time
to
‘0:00’
and
End
ofthe
cooking
time
flashing
andPress
time
show
'0:30'.
theand
+ / -pre
bu
ifthe
you
want
cancel
the
cooking
time
'0:00'
Cooking
time
(0to
- 10
hrs)'0:30'.
setting
flashing
and
time
will
show
Press
the
+time,
/the
- buttons
tocooking
set
the
required
and
the
time
show
'0:30'.
Press
the
+set
/ - the
buttons
toto
set
theto
required
You
must
set
'Cooking
time'SELECT
( will
) before
setting
the 'End
of cooking
time'.
SELECT
to
confirm.
ifflashing
you
want
to
cancel
the
cooking
time,
set
the
cooking
time
'0:00'
and press
End
of
cooking
time
cooking
time
and
to
confirm.
cooking
time
and setting
SELECT
to confirm.
cooking
time
and
SELECT
to
SELECT
to
confirm.
cooking
time
and
SELECT
Press
the
to to
select
the the
cooking
time
function.
The a symbol
will
keepof cooking time'.
ToSELECT
set
orCOOKING
change
the
time,
turn
theconfirm.
oven
onconfirm.
with
(do not select
You
must
set
the
'Cooking
time'
(power
)key
before
the
'End
End
of
cooking
time
END
OF
TIME
to
confirm.
Cooking
time
(0button
-time
10
hrs)
ifthe
you
want
to
cancel
the
cooking
time,
set
the
cooking
time
to
'0:00'
and
Press
button
until
the
symbol
keeps
flashing.
The
time
zone
will
flashing
and
the
will
show
'0:30'.
Press
the
+
/
buttons
to
set
the
required
function).
Press
the
button
twice
to
start
the
time
setting.
press
the
+
/
if
you
want
to
cancel
the
cooking
time,
set
thepress
cooking
You
must
set
the
'Cooking
time'
(
)
before
setting
the
'End
of
cooking
time'.
if you
want
to
cancel
the
cooking
time,
set
the
cooking
time
to
'0:00'
and
press
if
you
want
to
cancel
the
cooking
time,
set
the
cooking
time
to
'0:00'
and
press
display
the
current
time
+
the
set
cooking
time.
Press
the
+
/
buttons
to
set
the
EndSELECT
of
cooking
time
cooking
time
and
SELECT
to
confirm.
buttons
to change
the
time
and
SELECT
to
confirm.
to
confirm.
You
must
set
the
'Cooking
time'
(
)
before
setting
the
'End
of
cooking
time'.
SELECT
to
confirm.
SELECT
to
confirm.
Youend
must
set
time’
( the
)will
before
setting
the
‘End
of cooking time’.
End
of‘Cooking
cooking
time
SELECT
toifthe
confirm.
cooking
time,
and
SELECT
to confirm.
The
oven
then
the
End
want
tobutton
cancel
theto
cooking
time,
set
the
cooking
time
toflashing.
'0:00'
and press
When
the
isyou
first
turned
on
or until
restarts,
time
must
becalculate
re set.
Press
the
button
the
symbol
keeps
The
time zone
willwill kee
Press
the
select
the
cooking
time
function.
The
symbol
Alarm
setting
End
ofoven
cooking
time
cooking
time - button
Cooking
time
to determine
when
to( start cooking.
The
oven will The
SELECT
to
confirm.
You
must
set the
'Cooking
time'
) before
setting
the time
'End zone
of cooking
time'.
Press
the
until
the
symbol
keeps
flashing.
will
display
the
current
time
+
the
set
cooking
time.
Press
the
+
/
buttons
to
set the
flashing
and
the
time
will
show
'0:30'.
Press
the
+
/
buttons
to
set
the
required
Press
the
button
until
the
alarm
symbol
flashes.
Then
press
the
+
/
then
start
at
the
calculated
time.
Press
the
button
until
symboltime'
keeps( flashing.
Thesetting
time zone
will display
You
must
setthe
the
'Cooking
)time
before
'End
of cooking
time
End
of
cooking
time
End
ofEnd
cooking
time
Press
the
button
until
the
keeps
flashing.
Thethe
time
zone
will
End
ofsymbol
cooking
You
must
set
the
'Cooking
time'
(time'
) before
setting
'End
of
cooking
time'.
Cooking
(0
-symbol
10
hrs)
of
cooking
time
display
the
current
time
+
the
set
cooking
time.
Press
/
buttons
to
set
the
buttons
totime
set
the
time,
and
SELECT
to
confirm.
To cancel
the
alarm,
set
thethe
time +the
When
the
shows,
the
'End
of
cooking
cannot
be
set.
End
of
cooking
time
end
cooking
time,
and
SELECT
to
confirm.
The
oven
will
then
calculate
the
End
cooking
time
and
SELECT
to
confirm.
thetoTocurrent
time
+
the
set
cooking
time.
Press
the
+
/
buttons
to
set
the
end
'0:00'
and
confirm.
cancel
the
'End
ofcurrent
cooking
time'
set itto
tothe
current
time
+ cooking
time.will
display
the
time
+(the
set
time.
Press
+'End
/time
- buttons
to
the
Press
the
button
until
keeps
flashing.
The
zone
willset
end
cooking
time,
and
SELECT
confirm.
oven
then
calculate
the
End
You
must
set
the
'Cooking
time'
(cooking
)setting
before
setting
the
of
cooking
time'.
Press
the
button
to
select
the
cooking
time
The
symbol
will
keep
You
must
set
the
'Cooking
time'
)to
before
setting
the
'End
ofthe
cooking
time'.
You
must
the
'Cooking
time'
(function.
)symbol
before
the
'End
of
cooking
time'.
cooking
and
SELECT
to confirm.
The
oven
will
then
calculate
end
cooking
cooking
time
-set
Cooking
time
when
to
start
cooking.
oven
willwillth
iftime,
you
want
to
cancel
the
cooking
time,
set
the
cooking
time
to
'0:00'
and
press
You
must
set
'Cooking
time'
( determine
) The
before
setting
the
'End
ofthe
time'.
You
must
set
the
'Cooking
time'
(cooking
)The
before
setting
Press
the
button
until
the
symbol
keeps
flashing.
The
time
zone
flashing
and
the
time
will
show
'0:30'.
Press
the
+
/
buttons
to
set
the
required
cooking
time,
and
SELECT
tocooking
confirm.
The
oven
will
then
calculate
End
display
the
current
time
+ determine
the
set
time.
Press
theoven
+The
/The
-will
buttons
tothe
setat
the
Press
the
button
until
thewhen
symbol
keeps
flashing.
time
zone
will
cooking
time
- lock
Cooking
time
to
when
to start
cooking.
oven
will
Children
safety
time
-end
Cooking
time
toconfirm.
determine
tokeeps
start
cooking.
The
then
start
then
at
the
calculated
time.
SELECT
to
confirm.
cooking
timestart
and
SELECT
to
Time
setting
display
the
current
time
+confirm.
the
set
cooking
Press
Press
the
button
until the
symbol
flashing.
The time.
time zone
will the + / - buttons to set
Press
and
hold
the
SELECT
button
for
5
seconds
to
activate
the
Child
safety
lock.
cooking
time
Cooking
time
to
determine
when
to
start
cooking.
The
oven
will
end
cooking
time,
and
SELECT
to
The
oven
will
then
calculate
the
End
display
current
time
+
the
set
cooking
time.
Press
the
+
/
buttons
to
set
then
start
at
the
calculated
time.
Press
the
button
until
the
symbol
keeps
flashing.
The
time
zone
will
Press
button
until
the
symbol
keeps
The
time
willthe
you
want the
to the
cancel
the
time,
set
the
cooking
time
to keeps
'0:00'
and
theifcalculated
time.
display
thecooking
current
time
+the
the
set
cooking
time.
Press
the
+press
/ - flashing.
buttons
to set
the symbol
Press
button
until
symbol
flashing.
The
time
zone
will
When
the
symbol
shows,
'End
ofbutton
cooking
cannot
bezone
set.
Press
the
until
the
keeps
flashin
The
display
will
show
the turn
symbol.
end
time,
and
SELECT
to
oven
will
then
calculate
the En
To
set
ortochange
thecooking
time,
the
oven on
with
thethe
power
keyconfirm.
(do
not
selectThe
a time'
SELECT
confirm.
end
cooking
time,
and
SELECT
to
confirm.
The
oven
will
then
calculate
the
End
then
start
at
the
calculated
time.
cooking
time
Cooking
time
to
determine
when
to
start
cooking.
The
oven
will
end
cooking
time,
and
SELECT
to
confirm.
The
oven
will
then
calculate
the
End
display
the
current
time
+
the
set
cooking
time.
Press
the
+
/
buttons
to
set
the
When
the
symbol
shows,
the
'End
of
cooking
time'
cannot
be
When
the
symbol
the
‘End
of
cooking
time’
cannot
set.
To to
cancel
display
the
current
time
+button
the
set
cooking
time.
Press
the
+buttons
/set.
-cooking
buttons
tothe
setPress
the t
to display
deactivate,
press
and
holdshows,
the
SELECT
again
for
5 seconds.
the
current
time
+time
the
set
cooking
Press
the
+the
/+be
-will
set
function).
Press
the
button
twice
to
start
the
time
setting.
press
the
+ / time
- when
End
of
cooking
To
cancel
the
'End
of
cooking
time'
set
ittime.
current
time
cooking
time.
the
current
+oven
set
time.
cooking
time
Cooking
time
to
determine
to
start
cooking.
The
oven
w
cooking
time
- time
Cooking
to display
determine
when
toto
start
cooking.
The
end
cooking
time,
and
SELECT
to
confirm.
The
oven
will
then
calculate
the
End
When
the
symbol
shows,
the
'End
of
cooking
time'
cannot
be
set.
thecancel
‘End
of
cooking
time’
set
it
to
current
time
+
cooking
time.
buttons
to
change
the
time
and
SELECT
to
confirm.
then
start
at
the
calculated
time.
cooking
time
Cooking
time
to
determine
when
to
start
cooking.
The
oven
will
To
the
'End
of
cooking
time'
set
it
to
current
time
+
cooking
time.
End
of
cooking
time
end
cooking
time,
and
SELECT
to
confirm.
The
oven
will
then
calculate
the
End
end cooking
time,
and
SELECT
to
confirm.
The
oven
will
then
calculate
the
End
then start
at the
calculated
time.
end
cooking
time,
and
SELECT
to
confirm.
The
oven
wil
then
at
calculated
time.
When the
oven
isCooking
firststart
turned
on the
or to
restarts,
thetime'
time must
be re
set.
You
must
set
the
(ofset
)to
before
setting
the
'End
of
cooking
time'.
cooking
time
-time
time
determine
when
start
cooking.
The
oven
will
When
symbol
shows,
the
'End
cooking
time'
cannot
be
set.
To
cancel
the
'End
of
cooking
time'
it
to
current
time
+cooking.
cooking
time.
When
the
the
'End
of
cooking
time'
cannot
be
set.
then
start
at the
the
calculated
time.
You
must
set
the
'Cooking
time'
( 'Cooking
) shows,
before
setting
the
'End
of
cooking
time'.
cooking
time
-symbol
Cooking
time
to
determine
when
to
start
The
oven
will
cooking
-the
Cooking
time
to
determine
when
to
cooking.
The
oven
will
cooking
time
-time
Cooking
time
determine
when
Children
safety
lock
CHILD
SAFETY
LOCK
When
symbol
shows,
the
'End
ofstart
cooking
time'
cannot
be set.to star
To
cancel
the
'End
of
cooking
time'
set
it
to
current
+ cooking
time. to
then
start
at
the
calculated
time.
To
cancel
the
'End
of
cooking
time'
set
it
to
current
time
+
cooking
time.
When
the
symbol
shows,
the
'End
of
cooking
time'
cannot
be
set.
Children
safety
lock
then
start
at
the
calculated
time.
then
start
at
the
calculated
time.
Cooking
time
(0
10
hrs)
then
start
at
the
time.
PressPress
the
button
until the
symbol
keeps
flashing.
The
time
zone calculated
willto to
and
hold
SELECT
button
for
5 seconds
the+time
Child
safety
To
cancel
the
'End
of
cooking
time'
set
it
current
time
cooking
time.
17activate
When
the
symbol
shows,
the
'End
cooking
cannot
be
set.
Press
the
button
until
the
keeps
The
zone
willlock.
Children
safety
lock
Children
safety
lock
To
cancel
the
'End
of
cooking
time'
set
to
current
time
+Child
cooking
time.
Press
and
the
button
for
55of
seconds
totime'
activate
the
safety
lock.
When
the
symbol
shows,
the
'End
cooking
cannot
be
set.
Press
and
hold
the
SELECT
button
for
seconds
to
the
Child
safety
lock.
display
thehold
current
timeSELECT
+ the
set
cooking
time.
Press
the
+symbol
/ of
-itbuttons
toactivate
set time'
theflashing.
When
the
symbol
shows,
the
'End
of
cooking
time'
cannot
be
set.
When
the
symbol
shows,
the
'End
of
cooking
tim
The
display
will
show
the
symbol.
Press
the
button
to
select
the
cooking
time
function.
The
symbol
will
keep
Press
and
holdto
the
SELECT
button
5 seconds
to activate
Child safety
lock.
To
cancel
thewill
'End
of
cooking
time'
set
itfor
to
current
time
+the
cooking
time.
end
cooking
time,
and
SELECT
confirm.
The
oven
will
then
calculate
the
End
display
the
current
time
+button
the
set
cooking
time.
Press
the
+the
/ time.
-Child
buttons
to set
the
Theflashing
display
show
symbol.
deactivate,
press
and
SELECT
Press
and
hold
the
SELECT
for
seconds
to
activate
safety
lock.
Children
safety
lock
To
cancel
the
'End
of
cooking
time'
set
itto5the
toset
current
time
+ hold
cooking
The
display
will
show
the
symbol.
and
the
time
will
show
'0:30'.
Press
the
+ /time'
-To
buttons
the
required
To
cancel
the
'End
of
cooking
set
it
to
current
time
+
cooking
time.
The
display
will
show
the
symbol.
To
cancel
'End
of
cooking
time'
set
it
to
current
tim
cooking
time
- Cooking timepress
to determine
when
startSELECT
cooking. The
oven willagain for 5 seconds.
to
deactivate,
and
holdtothe
button
Children
safety
lock
cooking
time
and
SELECT
to
confirm.
button
again
for
5will
seconds.
end
cooking
time,
and
SELECT
to
The
oven
will
then
calculate
thelock.
End
to
deactivate,
press
and
hold
thesymbol.
SELECT
button
again
for 5to
seconds.
The
display
show
the
Children
safety
lock
Press
and
hold
the
SELECT
button
forconfirm.
5 seconds
activate
the Child
safety
to
deactivate,
press
and
hold
the
SELECT
button
again
for
5
seconds.
then
start
at
the
calculated
time.
if you want
to cancel
theand
cooking
time,the
set the
cooking time
to '0:00'
and5press
Children
safety
lock
Press
hold
SELECT
button
for
seconds
to activate
the Child
safety
When
the
symbol
shows,
theand
'End of
cooking
cannot be
set.when
cooking
time
- Cooking
time
totime'
determine
to
start
cooking.
ovenlock.
will
Children
safety
lock
to
press
hold
the
SELECT
button
again
for
5the
seconds.
The
display
will
show
the
symbol.
Press
and
hold
the
SELECT
button
for
5 seconds
to
activate
ChildThe
safety
SELECT
todeactivate,
confirm.
Children
safety
lock
To cancel
the
'End
of
cooking
time'
set
it
to
current
time
+
cooking
time.
Children
safety
lock
Press
and
hold
the
SELECT
button
for
5
seconds
to
activate
the
Child
safety
lock.
The
display
will
show
the
symbol.
then
start
atpress
the
calculated
time.
Press
and
hold
the
SELECT
button
for for
5 seconds
toagain
activate
Child
safetysafety
lock. lock.
to
deactivate,
and
hold
the
SELECT
forthe
5 seconds.
The
display
will
show
the
symbol.
Press
and
hold
the
SELECT
button
5button
seconds
to activate
the
Enddisplay
of cooking
time
The
will
show
the
symbol.
Press
and
hold
the
SELECT
button
forChild
seconds
to act
to
deactivate,
press
and
hold
the
SELECT
button
again
for
5 5be
seconds.
Children
safety
lock
When
the
symbol
shows,
the
'End
of
cooking
time'
cannot
set.
The
display
will
show
the
symbol.
to
deactivate,
press
and
hold
the
SELECT
button
again
for 5 seconds.
The
display
will
show
symbol.
to You
deactivate,
press
and
hold
the
SELECT
button
again
forlock.
5 the
seconds.
must
thethe
'Cooking
time'
( for
) before
setting
the
'Endthe
of cooking
time'.
17
Press
andset
hold
SELECT
button
5the
seconds
to
activate
Child
safety
The
display
will
show
symbol.
To
cancel
the
'End
of cooking
setbutton
it to current
time
+ cooking time.
toto
deactivate,
press
and
hold the time'
SELECT
again for
5 seconds.
The display
will show the press
symbol.and hold the SELECT button again for 5 seconds.
deactivate,
to deactivate, press and hold the SELECT button again
Press
the
button
the thesymbol
flashing.
The5 time
zone will
to deactivate,
pressuntil
and hold
SELECTkeeps
button
again for
seconds.
17
display the current time + the set cooking time. Press the + / - buttons to set the
Children
end cooking
time, andsafety
SELECT tolock
confirm. The oven will then calculate the End
Please
keep this
instruction
future reference
cooking
time
- Cooking
time
tofordetermine
when to
start cooking.
oven will to activate the Child safety
Press
andmanual
hold
the
SELECT
button
for The
5 seconds
then start at the calculated time.
The display
willthe
show
symbol.
the
symbol shows,
'End ofthe
cooking time'
cannot be set.
17
17
18WhenInstruction
manual
C2401GM
To cancelto
thedeactivate,
'End of cooking time'
set itand
to current
time.
17
press
holdtime
the+ cooking
SELECT
button again for 5 seconds.
17
17
lock
17
17
17
When the set temperature is greater than 100 degrees and the pre-he
function hasn’t finished, you can press the BOOST key to start the rap
up
mode. when activated, the
symbol will be displayed on the
BOOST
Boost
When
thethe
set temperature
is greater is
than
100 degrees
the pre-heat
When
set temperature
greater
thanand100
degrees and the pre-heat function
temperature
screen.
function
finished,
youcan
can press
BOOST
key to key
start the
rapid heathasn’t hasn’t
finished,
you
pressthethe
BOOST
to start
the rapid heatup
up
mode.
when
activated,
the
symbol
will
be
displayed
on
the
activated, the symbol
will be displayed on the temperature screen.
temperature screen.
mode. When
The BOOST
setting
can only
used be
withused
the below
The
BOOST
setting
canbeonly
withfunctions:
the below functions:
The BOOST setting can only be used with the below functions:
,
,
,
,
,
DEMO MODE
,
C2401C2401 C2401C2401
DEMODEMO
MODEMODE
DEMODEMO
MODEMODE
TURNmode:
ON DEMO
MODE:
To turnTO
on demo
To turn on demo
mode:
To turn
on demo
mode:
turn
mode:
Press the
button to turn the To
oven
onon
(indemo
standby
mode). Press and hold the
button for 5
Pressthe
the
button
to
turn
the
oven
on (in
standby
mode).
Press
holdPress
the
button
forhold
5 button
Press
button
to
turn
the
oven
on
(in standby
mode).
Press
and
hold
Press the Press
button
tobutton
turn
the
oven
on
(in
standby
mode).
and
holdthe
the
the
to
turn
the
oven
(inand
standby
mode).
Press
and
the for
b
seconds. The alarm will beep 3 times, and
will appear
in
the
topon
right
of
the middle
display
to
seconds.
The
alarm
willseconds.
beep
3alarm
times,
and beep
will
appear
inand
the appear
top right
of
the
display
toof thedispl
seconds.
The
alarm
willalarm
beep
3 times,
and
will
inappear
the
topmiddle
right
of
the
middle
The
will
beep
3
times,
and
will
in
the
top
right
mid
button
for
5
seconds.
The
will
3
times
,
will
appear
in
the
top
confirm the oven has entered demo mode.
confirm
the oven
has display
entered
mode.
confirm
the
ovendemo
has
entered
demo
mode.
confirm
the
oven
hasthe
entered
demo
right
of the
middle
to
confirm
oven
has mode.
entered demo mode.
In demo mode, the normal operation of the cooling fan, circulation fan, and
In demo
mode, the normal
operation
of the cooling
fan, circulation
fan,and
andother
lightingfunctions
work normally,
lighting
however
all
heating
elements
are fan,
In demowork
mode,
the
normal
operation
of
the
cooling
fan,circulation
and
lighting
normally,
Innormally,
demo
mode,
the normal
operation
offan,
thecirculation
cooling
fan,work
and
lighting
no
In demo
the
normal
operation
of thefan,
cooling
fan,
circulation
andwork
lighting
however
all heating elements and
other mode,
functions
are
disabled.
disabled.
however all heating
elements
and
other
functions
are
disabled.
however
all
heating
elements
and
other
functions
are
disabled.
however all heating elements and other functions are disabled.
C2401
C2401
If the oven
is turned is
off,
it will remain
in
Demo
modeinwhen
the mode
over C2401
is turned
back over
on. is turned back
If Ifthe
itoven
will
remain
Demo
when
theoven
oven is turned
off,
itis will
remain
in
Demo
mode
when
overwhen
isthe
turned
backis
on.
Ifturned
the oven
turned
it will
remain
Demothe
mode
thewhen
over
turned
on. back o
Ifoff,
the
isoff,
turned
off,
it willinremain
in
Demo
mode
the
over isback
turned
on.
DEMO
DEMO MODE
MODE
DEMO MODE
To turn off demo mode
mode
To turn off demo
off
mode
To turn
turnmode,
off
demo
Todemo
Press the
button to enter standby
thenmode
press and hold the
button for 5 seconds. The
Press
the
button
to enter
standby
mode,
then
press
andthen
holdpress
thethen
button
forhold
5 seconds.
The
To
turn
off
demo
Press mode
the
button
tobutton
enter
standby
mode,
andpress
hold and
the
button for
5 second
tofrom
enter
standby
button
for
alarm will beep 3 times, and thePress thewill disappear
the
displaymode,
to confirm
the system
has the
18to the
alarm
will
beep
3
times,
and
the
will
disappear
from
the
display
confirm
the
has
To
turn
on
demo
mode:
alarm
will
beep
3 mode:
times,
and
the and the
will disappear
from
display
tosystem
confirm
the
system
To
turn
on
demo
mode:
alarm
will
beep
3
times,
will
disappear
from
the
display
to
confirm
theh
To
turn
on
demo
exited Demo mode, and is ready for normal use.
exited
Demobutton
mode,
and
is
ready
for
normal
use.
Press
the
button
to
turn
the
oven
on
standby
mode).
Press
and
hold
the
for
55 button for
exited
Demo
mode,
and
is (in
ready
for
normal
use.
Press
toexited
enter
standby
mode,
then
press
and
hold
the
button
for
Pressthe
the
button
to
turn
the
oven
on
(in
standby
mode).
Press
and
hold
the andbutton
button
for
Demo
mode,
and
is ready
normal
use.
Press the
button
to
turn
the
oven
on
(infor
standby
mode).
Press
hold the
alarm
will
beep
33 times,
and
will
appear
the
top
right
display
to
seconds. The
The
alarm
willThe
beep
times,
and 3 times,
willthe
appear in
inwill
theappear
top
right
of the
the
middle
display
to
seconds.
alarm
will
and
in of
the
topmiddle
right
the middle
displ
5 seconds.
seconds.
The
alarm
will
beep
3 beep
times,
and
will
disappear
from
theof
display
the
oven
has
demo
mode.
confirm
thethe
oven
has entered
entered
demo
mode.
confirm
the
ovenexited
has entered
mode.
toconfirm
confirm
system
has
Demodemo
mode,
and is ready for normal use.
Please keep this instruction manual for future reference
Instruction manual C2401GM
19
In
operation
of
cooling
fan,
fan,
and
normally,
In demo
demo mode,
mode,
the normal
normal
operation
of the
the
coolingof
fan,
circulation
fan,
and lighting
lighting
work
normally,
In the
demo
mode,
the normal
operation
thecirculation
cooling fan,
circulation
fan,work
and lighting
work no
PYROLYTIC CLEANING
With the Pyro clean mode, the internal temperature of the oven reaches 475ºC. The
pyrolytic cycle is activated, burning away food and grime residues. Dirt is literally
incinerated. Keep children away from the appliance during the automatic cleaning
cycle as surfaces may become very hot. Particles may ignite inside the oven due to
the combustion process. There is no cause for concern: this process is both normal
and hazard-free.
Before initiating the Pyro clean mode:
-- Remove large or coarse food residues from the inside of the oven using a damp
sponge. Do not use detergents.
-- Remove the side racks, telescopic runners, trays and wire shelves.
-- Remove all accessories.
-- Do not place tea towels or pot holders over the oven handle.
-- Ensure any tin foil is removed from the oven cavity.
NOTE:
If the oven is too hot, the pyrolytic may not start. Wait for the oven to cool down.
NOTE:
Alarm setting
The program may only be started once the oven door has been closed. To use the
button until
the alarm
fl
Pyro cleaning function, turn the oven onPress
with the
the
button,
and using
the symbol
/
select the Pyro cleaning function,buttons
followed
to confirm.
toby
setSELECT
the time,
and SELECT to confirm. To
AlarmTIME
setting
COOKING
to '0:00' and confirm.
Press the
buttonyou
untilcan
thechoose
alarm three
symbol
Thenwith
press
the + / By pressing
the
button
modesflashes.
of cleaning
default
Time
setting
buttons(1:15,
to set1:30
the time,
and SELECT to confirm. To cancel the alarm, set the time
time settings
and 2:00)
to '0:00' and confirm.
Tobe
setprogrammed
or change the
oven on with
An end time for Pyro clean cycle can also
thetime,
sameturn
waythe
as setting
function).
Press
to start the
the normal cooking end time. See previous
instruction
forthe
info on button
how totwice
set this.
buttons to change the time and SELECT to confirm
When the oven is first turned on or restarts, the t
To set or change the time, turn the oven on with the power key (do not select a
function). Press the
button twice to start the time setting. press the + / Cookingtotime
(0 - 10 hrs)
buttons to change the time and SELECT
confirm.
When the oven is first turned on Press
or restarts,
time must
be rethe
set.
the thebutton
to select
cooking time fu
Time setting
flashing and the time will show '0:30'. Press the +
cooking time and SELECT to confirm.
Cooking time (0 - 10 hrs)
if you want to cancel the cooking time, set the coo
Instruction
manual
C2401GM
Press
the
button to
select theSELECT
cooking
function. The
symbol will keep
totime
confirm.
flashing and the time will show '0:30'. Press the + / - buttons to set the required
Please keep this instruction manual for future reference
20
An end
time
forand
Pyro
clean cycle can also be programmed the same way as
time settings
(1:15,
1:30
2:00)
the Pyro
normal
cooking
endcan
time.
instruction
for info
An end setting
time for
clean
cycle
alsosee
beprevious
programmed
the same
wayon
as how to
setnormal
this. cooking end time. see previous instruction for info on how to
setting the
Safety
devices
set this.
SAFETY DEVICES
● The icon
on the display, when lit, indicates that the oven door was
Safety devices
automatically
aswhen
soon lit,
as
temperature
a high
on
display,
indicates
that
oven
was
--● The
The icon
on the
thelocked
display,
when
lit,the
indicates
that the
thereached
oven door
door
wasvalue.
● If a malfunction occurs, the heating elements will be switched off.
automatically
lockedasassoon
soonasasthe
thetemperature
temperaturereached
reachedaahigh
highvalue.
value.
automatically
locked
● Once the oven door has been locked, you cannot change the duration and cycle
malfunction
occurs, the
the heating
heating elements
elementswill
willbe
be switched
switchedoff.
off.
--● IfIfaamalfunction
occurs,
end
time
settings.
● Once
oven
door
been
locked,
cannot
change
duration
and
cycle
Once
thethe
oven
door
hashas
been
locked,
youyou
cannot
change
thethe
duration
and
cycle
end
time
settings.
end time settings.
ONCE THE PYROLYTIC CLEANING CYCLE IS OVER
You will have to wait until the temperature inside the oven has cooled down
sufficiently before you can open the oven door. You will notice some white dust
deposits on the bottom and the sides of your oven; remove these deposits with a19
damp sponge once the oven has cooled down completely alternatively, you can
make use of the already heated oven, in which case it is not necessary to remove
the deposits, they are completely harmless and will not affect your food in any way.
WARNING:
The appliance is fitted with an automatic diagnostic system which detects any
malfunctions. Malfunctions are displayed by messages of the following type ‘E’,
followed by numbers.
Refer to the ‘Troubleshooting’ section if a malfunction occurs, or alternatively call
Caple service for assistance.
PLEASE HAVE THE FOLLOWING INFORMATION TO HAND:
-- The type of problem encountered;
-- The serial number(S/N);
(This can be found on the Rating plate located on the appliance)
Please keep this instruction manual for future reference
Instruction manual C2401GM
21
19
REPLACING THE OVEN LAMPS
-- Switch off your oven at the mains.
-- Remove the glass cover of the lamp-holder
-- Remove the light bulb and replace it with a similar one
E OVEN LAMPS
-- Remount the glass cover and reconnect the appliance to the power supply
at the mains.
ver of the lamp-holder
b and replace it with a similar one
cteristics
240V
Halogen lamp characteristics
-- Voltage: AC220V-240V
-- Wattage: 25W
-- Cap: G9
over and reconnect the appliance to the power supply.
DO NOT TOUCH the light bulb directly with your hands.
ight bulb directly with your hands.
WARNING:
Ensure from
thatthe
the
appliance
is disconnected
nce is disconnected
mains
before replacing
the
ibility of electric
shock.the possibility of electric shock.
to avoid
Please keep this instruction manual for future reference
Instruction manual C2105
21
21
28/06/2017 12:28
Please keep this instruction manual for future reference
22
Instruction manual C2401GM
from the mains before replacing the lamp
TROUBLESHOOTING
Troubles
Solution
The oven does not operate
Check it is switched on at the mains
There has been a power cut
The time is not set
The oven is not heating
The thermostat is not turned to a
temperature
The interior lamp does not illuminate
Check the product is connected to the
electrical supply and is switched on
Replace the bulb
Lower and upper parts of the oven
are not
cooking evenly
Control the shelf location, cooking
period and temperatures according to
the manual
If the problem still persists, please contact Caple service for assistance:
T - 0117 938 7420
E - [email protected]
ERROR DISPLAY
Display
Error
Reason
E 01
No sensor
Temperature might be too high; oven will stop
working and cooling fan start.
E 02
Sensor short circuit
Wrong sensor. Oven will stop working and
cooling fan start.
E 03
Door lock
Door lock reset switch is not registering. Possibly
unplugged.
Please keep this instruction manual for future reference
Instruction manual C2401GM
23
REMOVING
THE
OVEN
DOOR
REMOVING
REMOVING
THETHE
OVEN
OVEN
DOOR
DOOR
make
it easier
clean
the
inside
ofoven,
your
oven,
the
oven
door
be removed,
To make
To To
make
it
easier
it easier
to clean
to to
clean
the
the
inside
inside
of
your
of your
oven,
the
the
oven
oven
door
door
can
can
be can
removed,
be removed,
by proceeding as follows (Fig. 1-2):
by proceeding
by proceeding
as follows
as follows
(Fig.(Fig.
1-2):1-2):
-- Open the door completely and lift the 2 levers “B” (Fig.1);
● ●
Open
Open
the the
doordoor
completely
completely
andand
lift the
lift the
2 levers
2 levers
“B” “B”
(Fig.1);
(Fig.1);
-- Now, shutting the door slightly, you can lift it out by pulling out the hooks “A” as
● ●
Now,
Now,
shutting
shutting
the the
door
slightly,
slightly,
youyou
can can
lift itliftout
it out
by pulling
by pulling
out out
the the
hooks
hooks
“A” “A”
shown
in figure
2.door
as shown
as shown
in figure
in figure
2. 2.
To reassemble the door:
To reassemble
To reassemble
the the
door:
door:
With
the
door
inaavertical
vertical
position,
insert
the two
two
hooks
“A”into
into
the
slots;
● ●
WithWith
the the
doordoor
in a in
vertical
position,
position,
insert
insert
the the
two
hooks
hooks
“A” “A”
into
the
the
slots;
slots;
-- Ensure
seat
is
perfectly
the
edge
of the
the slot
slot
(move
the oven
● ●Ensure
Ensure
thatthat
that
seat
seat
“D”“D”
“D”
is hooked
is hooked
hooked
perfectly
perfectly
ontoonto
onto
the the
edgeedge
of the
of
slot
(move
(move
the the
door backwards and forward slightly);
oven
oven
doordoor
backwards
backwards
andand
forward
forward
slightly);
slightly);
Keep
the
oven
door
open
fully,
unhook
levers
“B”downwards
downwards
and
then shut
● ●
Keep
Keep
the the
ovenoven
doordoor
open
open
fully,fully,
unhook
unhook
the the
2the
levers
22levers
“B” “B”
downwards
andand
then
then
the door again.
shutshut
the the
doordoor
again.
again.
Fig 1
Fig. Fig.
1 1
Fig 2
Fig. Fig.
2 2
Please keep this instruction manual for future reference
24
Instruction manual C2401GM
3
3
REMOVING
THE GLASS
GLASSPANELS
PANELS
REMOVING THE
The
oven
door
is made
4 panes
glass
andhas
hasvents
ventsatatthe
thetop
topand
andbottom.
bottom.
The
oven
door
is made
upup
ofof
4 panes
ofof
glass
and
When
the
oven
is
operating,
air
is
circulated
through
the
door
to
keep
the
outer
When the oven is operating, air is circulated through the door to keep the outer
pane
cool.
If condensation
has
worked
way
betweenthe
theglass
glasspanes,
panes,the
thedoor
pane
cool.
If condensation
has
worked
itsits
way
ininbetween
door
can
be
dismantled
in
order
to
clean
in
between
the
panes.
Remove
the
can be dismantled in order to clean in between the panes. Remove the door asdoor
per
per the
below instructions
place
it on a protective
surface
oncloth)
a tableto
theasbelow
instructions
and placeand
it on
a protective
surface (e.g.
on (e.g.
a table
cloth) ittogetting
preventscratched.
it getting The
scratched.
The door
handle
line
withofthe
prevent
door handle
should
lineshould
up with
theupedge
theedge
of
the
table.
Make
sure
the
glass
lies
flat
to
avoid
breakage
of
glass
during
table. Make sure the glass lies flat to avoid breakage of glass during cleaning.
cleaning.
-- -
'
l
2
6
4 ____
,
··.�
4--
-
5
1
-'
Please keep this instruction manual for future reference
Instruction manual C2401GM
25
- Remove the side racks
- Choose which shelf to use with the telescopic runner. Pay attention to the
direction in which the runner is to be extracted, position joint ‘B’ and joint ‘C
on the frame (see Fig.1).
TELESCOPIC
RUNNERS
- Finally, re-fit the side racks as per below instructions.
Telescopic runners
To assemble the telescopic runners:
To assemble the telescopic runners:
- Remove
side racks
racks (see section below and Fig.2)
-- Remove
thetheside
- Choose which shelf to use with the telescopic runner. Pay attention to the
-- C
hoose
which
shelfthetorunner
use with
telescopic
runner.
direction
in which
is to bethe
extracted,
position
joint ‘B’ and joint ‘C’
Paying
attention
the direction in which the runner is
on the
frame (seetoFig.1).
to -beFinally,
extracted,
joint
‘B’ and
joint ‘C’ on the
re-fit theposition
side racks as
per below
instructions.
frame (see Fig.1).
-- S queeze the bars together slightly and clip either
end of the telescopic runners on to the side racks.
Fig.1
Figure 1.
-- Finally, refit the side racks (See below Fig.1
and Fig.2)
Side racks
Attach
Side the
racksside racks by pushing these onto the furthest steel clip and then cl
SIDE
RACKS
theAttach
other
onto
closest
steel
theend
side racks
by the
pushing
these onto
the clip.
furthest steel clip and then clicking
the other end onto the closest steel clip.
Attach the side racks by pushing these onto the furthest steel clip and then clicking
Visit
our
Caple
website
view
a 'How
towww.caple.co.uk
video' on this. www.caple.co.uk
Visit
ourend
Caple
website
viewto
a 'How
to clip.
video'
on this.
the
other
onto
thetoclosest
steel
Visit our Caple website to view a ‘How to video’ on this. www.caple.co.uk
Figure 2.
Please keep this instruction manual for future reference
26
Instruction manual C2401GM
TECHNICAL FICHE
Caple
Model
C2401GM
Type of oven
Electric
Mass
40.50kg
Energy Efficiency Index Conventional
98.1
Energy Efficiency Index Fan forced
98.1
Energy Class
A
Energy Consumption (Electricity) conventional
0.82
Energy Consumption (Electricity) fan forced
0.86
Number of cavities
1
Heat Source
Electric
Volume
67
This oven complies with EN 60350-1:2016
Please keep this instruction manual for future reference
Instruction manual C2401GM
27
Caple Service
Fourth Way
Avonmouth
Bristol
BS11 8DW
t: 0117 938 7420
e: [email protected]
www.caple.co.uk
Please keep this instruction manual for future reference
28
Instruction manual C2401GM
Version 1

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement