CELANO V2
™ FP8062B** 52˝ Ceiling Fan A 5.51˝ dia 12° Blade Pitch B A B
Fan w/4.5˝ downrod 14.71˝ 11.10˝ Fan w/12˝ downrod 22.21˝ 18.60˝ Fan w/18˝ downrod 28.21˝ 24.60˝ Fan w/24˝ downrod 34.21˝ 30.60˝ Fan w/36˝ downrod 46.21˝ 42.60˝ Fan w/48˝ downrod 58.21˝ 54.60˝ Fan w/60˝ downrod 70.21˝ 66.60˝ Fan w/72˝ downrod 82.21˝ 78.60˝
Blade Sweep= 52˝ dia Net Hanging Weight: 17.86 lbs
BN DZ
Available Finish
Brushed Nickel with reversible Cherry/Dark Walnut Blade and Opal Frosted glass Dark Bronze with reversible Cherry/Dark Walnut Blade and Opal Frosted glass
INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction box capable of withstanding a load of at least 35 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit.
MW Matte White with Matte White Blade and Opal Frosted glass
Airflow / Energy Efficiency Info (120V) Fan Speed Max RPM CFM CFM / Watts Amps Watts
High 171 5192 88 0.49
59 Med 113 3226 124 0.34
26 Low 58 1532 164 0.20
9
MOTOR SPECS:
172 x 17 AC motor is designed for optimal performance with this fan.
BLADES:
A set of five 22.5˝ plywood blades is included.
Light Bulb Information (120V) Bulb Type Watts QTY Lumens Amount Color Temp CRI
LED 18 1 1400
Energy Guide FTC
3000 90%
LIGHTING OPTIONS:
One 18-watt dimmable LED included.
Power (W ave ) Total Air Delivery (CFM ave ) Estimated Yearly Energy Cost ($) Ceiling Fan Efficiency (CFM/W)
38 3402 11 90
CONTROL OPTIONS:
TR500 hand-held remote control is included. Push button remote control with variable fan speeds, infinite light levels, fan/light timer and off button. The reverse switch is located on the top housing. Optional CWRL4, WC2WH and WR501WH wall controls , BTCR9 and CRL4WH hand held remote controls and BTR9 and WFR50 WiFi receiver are available —sold separately. Instructions are provided with each control. Fan comes with 1˝ dia. x 4.5˝ long downrod (DR1-45). Optional downrods available in 12˝,18˝, 24˝, 36˝, 48˝, 60˝ and 72˝ lengths. A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on a sloped ceiling up to 19°. Most sloped ceiling installations require a downrod longer than the standard 4.5˝downrod. Optional sloped ceiling ball kits (SCK1-52) are available for slope angles greater than 19° and up to 42°. Optional close-to-ceiling kit is available as well—sold separately. Call technical support for more information.
LOCATION USE:
Fan is rated for dry location only.