EDGEWOOD
®
SERIES
TF610**-220 Decorative Fan
Blade Sweep = 52˝ dia Net Hanging Weight: 21.19 lbs INSTALLATION REQUIREMENTS:
Fan must be attached to a securely anchored electrical junction box capable of withstanding a load of at least 50 lbs.
ELECTRICAL REQUIREMENTS:
Requires a grounded electrical supply line of 220~240 volts AC, 50Hz, 5 amp circuit.
MOTOR SPECS:
188x20-220 motor is designed for optimal performance with this fan.
Fan w/4.5˝ downrod Fan w/12˝ downrod Fan w/18˝ downrod Fan w/24˝ downrod Fan w/36˝ downrod Fan w/48˝ downrod Fan w/60˝ downrod Fan w/72˝ downrod
A B
13.88˝ 12.52˝ 21.38˝ 20.02˝ 27.38˝ 26.02˝ 33.38˝ 32.02˝ 45.38˝ 44.02˝ 57.38˝ 56.02˝ 69.38˝ 68.02˝ 81.38˝ 80.02˝
Available Finishes Fan / Housing Assembly Blades - Traditional
SN Satin nickel Walnut / light walnut TS Tortoise shell WH White Walnut / light walnut White / white oak
TUV/GS Efficiency Info (220V) Fan Speed Max RPM Amps Watts
High 161 0.26
63 Med Low 122 77 0.20
0.13
38 15
BLADES:
A set of five 22” reversible traditional wood blades is included.
CONTROL OPTIONS:
Optional C1-220, C2-220, C3-220 and C6-220 wall controls and CR4WH-220 remote control (with receiver units) are available — sold separately. Instructions are provided with each control.
LIGHTING OPTIONS:
Optional lighting fitters and light kits are available. See our catalog or visit www.fanimation.com for available lighting options.
DOWNROD OPTIONS:
Fan comes with 1˝ dia. x 4.5˝ long downrod. Optional downrods available in 12”, 18˝, 24˝, 36˝, 48˝, 60˝, and 72˝ lengths. A downrod coupler is available for installations requiring a downrod longer than 72˝. Fan can be mounted on a sloped ceiling up to 19°. Call technical support for more information.
LOCATION USE:
Fan is rated for dry locations only.
32
