Fanimation Edgewood Deluxe TF710 Spec Sheet
Below you will find brief information for Ceiling Fan EDGEWOOD TF710. The EDGEWOOD TF710 ceiling fan comes with a 4.5 inch downrod and a set of five 26 inch reversible wood blades. The fan also has a 16 degree blade pitch and is rated for dry locations only. The fan requires a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. It also comes with optional downrods in various lengths, as well as optional close-to-ceiling and sloped ceiling kits. The fan is ENERGY STAR certified and has 3 different speed settings.
Advertisement
Advertisement
Advertisement
Key features
- ENERGY STAR certified
- 5 reversible wood blades
- 16 degree blade pitch
- various downrod lengths
- close-to-ceiling and sloped ceiling kits
- 3 speed settings
- dry locations only
- 120 volts AC, 60 Hz, 15 amp circuit
Frequently asked questions
The fan has a blade sweep of 60 inches in diameter and a net hanging weight of 29.78 pounds.
The fan comes with a 1 inch diameter x 4.5 inch long downrod. Optional downrods are available in 12 inch, 18 inch, 24 inch, 36 inch, 48 inch, 60 inch, and 72 inch lengths. A downrod coupler is available for installations requiring a downrod longer than 72 inches.
Optional CW1, CW1SW, CW2, CW5, CWRL4 and CW60WH wall controls are available. Optional BTCR9, C4, CRL4WH and CRL8TS remote controls with a receiver unit and BTR9 receiver unit are available. Instructions are provided with each control.