Bartscher 115115 Warmer 650, W400, 1/1GN, TU Operating instructions

SNACK
115115
IT – CH
BAGNOMARIA, SCALDAPATATE
ISTRUZIONI PER L’INSTALLAZIONE, USO E MANUTENZIONE
Leggere subito le informazioni generali!
DE – AT – IT – BE – LU –CH
BAINMARIE, FRITTENWANNE
ANWEISUNGEN FÜR INSTALLATION, GEBRAUCH UND WARTUNG
Die Hinweise sollen sofort gelesen werden!
GB – IE – MT
BAINE MARIE, POTATO WARMER
INSTRUCTIONS FOR INSTALLATION, OPERATION AND MAINTENANCE
Read the general informations immediately!
BAIN MARIE, CHAUFFE-POMMES DE TERRE
FR – BE – LU – CH
INSTRUCIONS POUR INSTALLATION, EMPLOI ET ENTRETIEN
Lire tout de suite averissements!
BAÑO MARIA, CONSERVADOR DE PATATAS
ES
INSTRUCCIONES PARA INSTAKKACION, USO Y MANTENINIENTO
¡En primer lugar leer las advertencias!
BAIN-MARIE, VERWARMDE FRITESBAK
NL – BE
ISTRUCTIES VOOR INSTALLATIE, GEBRUIK EN ONDERHOUD
Lees de waarschuwingen onmiddellijk!
DOC.NO CR0930080
EDITION 001
SCHEMA DI INSTALLAZIONE - INSTALLATION DIAGRAM - INSTALLATIONSPLAN - SCHÉMA D’INSTALLATION ESQUEMA DE INSTALACION -INSTALLATIESCHEMA - IINSTALLATIONSRITNINGAR
1
SCHEMA DI INSTALLAZIONE - INSTALLATION DIAGRAM - INSTALLATIONSPLAN - SCHÉMA D’INSTALLATION ESQUEMA DE INSTALACION -INSTALLATIESCHEMA - IINSTALLATIONSRITNINGAR
2
EME62T
EME63T
EME64T
ERP62T
B66E
B68E
SP64E







B64E







OSP64E
OB68E
OB66E
OB64E







6NSP/E400
6NBM/E800
6NBM/E600
6NBM/E400


































































 























DATI TECNICI - TECHNICAL DATA - TECHNISCHE DATEN - CARACTERISTIQUES TECHNIQUES - DATOS TECNICOS - TECHNISCHE GEGEVENS
3
GENERAL INFORMATION....................................................................................................................................................... 17
1
APPLIANCE SPECIFICATIONS ................................................................................................................................ 17
2
GENERAL PRESCRIPTIONS .................................................................................................................................... 17
REMINDERS FOR THE INSTALLER ....................................................................................................................................... 17
REMINDERS FOR THE USER ................................................................................................................................................ 17
REMINDERS FOR THE MAINTENANCE TECHNICIAN ......................................................................................................... 17
REMINDERS FOR CLEANING ................................................................................................................................................ 17
3
DISPOSAL OF PACKING AND THE APPLIANCE ..................................................................................................... 17
INSTRUCTIONS FOR INSTALLATION .................................................................................................................................... 17
REMINDERS FOR THE INSTALLER ....................................................................................................................................... 17
4
REFERENCE STANDARDS AND LAWS................................................................................................................... 18
5
UNPACKING .............................................................................................................................................................. 18
6
POSITIONING............................................................................................................................................................ 18
7
CONNECTIONS......................................................................................................................................................... 18
8
COMMISSIONING ..................................................................................................................................................... 18
INSTRUCTIONS FOR USE...................................................................................................................................................... 18
REMINDERS FOR THE USER ................................................................................................................................................ 18
9
USING THE ELECTRIC BAIN MARIE ...................................................................................................................... 19
10
USING THE POTATO WARMER ............................................................................................................................... 19
11
PROLONGED DISUSE .............................................................................................................................................. 19
INSTRUCTIONS FOR CLEANING........................................................................................................................................... 19
REMINDERS FOR CLEANING ................................................................................................................................................ 19
INSTRUCTIONS FOR MAINTENANCE ................................................................................................................................... 20
REMINDERS FOR THE MAINTENANCE TECHNICIAN ......................................................................................................... 20
12
COMMISSIONING ..................................................................................................................................................... 20
13
TROUBLESHOOTING ............................................................................................................................................... 20
13.1
ELECTRIC BAIN MARIE ........................................................................................................................................... 20
13.2
POTATO WARMER .................................................................................................................................................... 20
14
REPLACING COMPONENTS.................................................................................................................................... 20
REMINDERS FOR REPLACING COMPONENTS. .................................................................................................................. 20
14.1
ELECTRIC BAIN MARIE ........................................................................................................................................... 20
14.2
POTATO WARMER .................................................................................................................................................... 20
15
CLEANING THE INTERIOR ...................................................................................................................................... 20
16
MAIN COMPONENTS ............................................................................................................................................... 20
16.1
ELECTRIC BAIN MARIE ........................................................................................................................................... 20
16.2
POTATO WARMER .................................................................................................................................................... 21
16
GENERAL INFORMATION
This chapter contains general information which all users of the
manual must be familiar with. Specific information for individual
users of the manual is provided in subsequent chapters (" INSTRUCTIONS FOR .... " ).
1 APPLIANCE SPECIFICATIONS
• The appliance data plate is located inside the control panel.
• The appliance model and serial number are also detailed on
decals under the brand logo and on the packing.
2 GENERAL PRESCRIPTIONS
The manufacturer will not be liable for any damage or injury resulting from failure to observe the following rules
REMINDERS FOR THE INSTALLER
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and appliance maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions in this manual.
• Identify the specific appliance model. The model number is
detailed on the packing and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components.
REMINDERS FOR THE USER
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Keep this manual in a safe place known to all users so that it
can be consulted throughout the working life of the appliance.
• Installation, conversion to a different type of gas and appliance maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions in this manual.
• For after-sales service, contact technical assistance centers
authorized by the manufacturer and demand the use of original spare parts.
• Have the appliance serviced at least twice a year. The manufacturer recommends taking out a service contract.
• The appliance is designed for professional use and must be
operated by trained personnel.
• The appliance is to be used for cooking food as specified
in the reminders for use. Any other use must be considered
improper
• Do not allow the appliance to operate empty for prolonged
periods. Only pre-heat the oven just before use.
• Do not leave the appliance unattended while in operation.
• In the event of an appliance fault or malfunction, shut the
gas shut-off valve and/or switch the appliance off at the main
switch installed upline.
• Clean the appliance following the instructions given in Chapter " INSTRUCTIONS FOR CLEANING".
• Do not store flammable materials in close proximity to the
appliance. FIRE HAZARD.
• Children should be supervised to ensure that they do not play
with the appliance.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components.
REMINDERS FOR THE MAINTENANCE TECHNICIAN
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and appliance maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions in this manual.
• Identify the specific appliance model. The model number is
detailed on the packing and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components.
REMINDERS FOR CLEANING
• Clean the satin finish stainless steel exterior surfaces, the
cooking wells and the surface of the hotplates every day.
• At least twice a year, have an authorized technician clean the
internal parts of the appliance.
• Do not use direct or high pressure water jets to clean the
appliance.
• Do not use corrosive products to clean the floor beneath the
appliance.
3 DISPOSAL OF PACKING AND THE APPLIANCE
3.1 PACKING
The packing is made using environmentally friendly materials.
The plastic recyclable components are:
• the transparent cover, the bags containing the instructions
manual and nozzles ( made of Polyethylene - PE ).
• the straps (in Polypropylene - PP).
3.2 APPLIANCE
The appliance is manufactured 90% from recyclable metals
(stainless steel, aluminium sheet, copper.... ).
The appliance must be scrapped in compliance with current
regulations governing such disposal.
• It must be disposed of properly.
• Make the appliance unusable before scrapping.
INSTRUCTIONS FOR INSTALLATION
REMINDERS FOR THE INSTALLER
The manufacturer will not be liable for any damage or injury resulting from failure to observe the following rules
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and appliance maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions in this manual.
• Identify the specific appliance model. The model number is
detailed on the packing and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components.
17
Appliances in the DROP-IN series
• The appliance must be installed in strictc ompliance with the
directions given in the attached drawings.
• Appliances should only be installed on units made of metal
(and not wood and/or other flammable materials).
• Take particular care with the power lead: the channelways
must be perfectly smooth with no sharp corners and/or edges. The lead must not, at any point, be subjected to temperatures of more than 50°C above normal room temperature.
4 REFERENCE STANDARDS AND LAWS
Install the appliance in compliance with current safety standards.
Install the appliance in compliance with the prescriptions of
EN1717 and the water pollution regulations in force in your
country.
5 UNPACKING
Check the state of the packing and in the event of damage, ask
the delivery person to inspect the goods.
• Remove the packing
• Remove the protective film from the external panels. Use a
suitable solvent to remove any residual adhesive from the
panels
6 POSITIONING
• The overall dimensions of the appliance and the position of
connections are given on the installation diagram at the start
of this manual.
• The appliance can be installed singly or in combination with
other appliances in the same product range.
• The appliance is not suitable for integrated installation.
• Position the appliance at least 10 cm from adjacent walls.
This distance can be reduced in the presence of non-combustible walls or heat-insulated walls.
• Secure the power supply cable with the cable clamp.
• Protect the power supply cable on the outside of the appliance with a rigid plastic or metal pipe.
7.2 PROTECTIVE EARTH AND EARTH BONDING CONNECTIONS
Connect the appliance to an efficient ground circuit. Connect
the earth conductor to the terminal with the symbol
next to the main terminal board.
located
Connect the metal structure of the appliance to the equipotential node. Connect the conductor to the terminal with the
symbol
on the outside part of the bottom.
7.3 CONNECTION TO THE WATER SUPPLY
The appliance must be connected to a potable water supply.
The water inlet pressure must be between 150 kPa and 300
kPa. Use a pressure reducer if the inlet pressure is above the
maximum permitted level.
• Install a mechanical filter and a shut-off valve upstream of the
appliance in an easily accessible point.
• Make sure the water circuit is free from ferrous particles before connecting the filter and the appliance.
• Seal any unused connectors with a plug.
• Once the appliance has been installed, check for gas leaks at
the connection points.
7.4 CONNECTION TO THE WATER DRAIN
The water drainage system must be provided using materials
resistant to temperatures of 100 °C. The bottom of the appliance must not be subjected to steam produced by drainage of
hot water.
8 COMMISSIONING
See Chapter " INSTRUCTIONS FOR MAINTENANCE "
6.1 APPLIANCE ASSEMBLY WITH BASE
Follow the instructions provided with the type of support utilized.
6.2 JOINING APPLIANCES TOGETHER IN LINE
• Place the appliances side by side and adjust the tops to the
same height.
• Unite the appliances using the special unionjoint-coverings
supplied upon request
7 CONNECTIONS
The position and dimensions of connections are given in the
installation diagram at the start of this manual.
7.1 ELECTRICAL CONNECTIONS
Check that the appliance is designed to operate at the voltage
and frequency of the power supply present on site. Check the
details given on the appliance data plate.
• At an easily accessible point upline of the appliance, fit an
all-pole disconnect switch of suitable capacity with a contact
breaking distance of at least 3 mm, and a highly sensitive differential protection device. The maximum permitted leakage
current is 1 mA/kW.
• A flexible rubber cable with insulation specifications not lower
than type H05 RN-F must be used for connection.
• Connect the power supply cable to the terminal board as
shown in the wiring diagram supplied with the appliance.
18
INSTRUCTIONS FOR USE
REMINDERS FOR THE USER
The manufacturer will not be liable for any damage or injury resulting from failure to observe the following rules
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Keep this manual in a safe place known to all users so that it
can be consulted throughout the working life of the appliance.
• Installation, conversion to a different type of gas and appliance maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions in this manual.
• For after-sales service, contact technical assistance centers
authorized by the manufacturer and demand the use of original spare parts.
• Have the appliance serviced at least twice a year. The manufacturer recommends taking out a service contract.
• The appliance is designed for professional use and must be
operated by trained personnel.
• The appliance is to be used for cooking food as specified
in the reminders for use. Any other use must be considered
improper
• Do not allow the appliance to operate empty for prolonged
periods. Only pre-heat the oven just before use.
• Do not leave the appliance unattended while in operation.
• In the event of an appliance fault or malfunction, shut the
gas shut-off valve and/or switch the appliance off at the main
switch installed upline.
• Clean the appliance following the instructions given in Chapter " INSTRUCTIONS FOR CLEANING".
• Do not store flammable materials in close proximity to the
appliance. FIRE HAZARD.
• Children should be supervised to ensure that they do not play
with the appliance.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components.
9 USING THE ELECTRIC BAIN MARIE
Beware of the appliance’s hot surfaces!
• The capability of the lamp to store and even out the heat also
keeps it hot for a long time after switching it off.
Operation of well
The thermostat control knob has the following positions:
Off
30 Minimum water temperature
90 Maximum water temperature
Switching on
• Turn the knob to the chosen temperature setting.
Operation of infrared heating
REMINDERS FOR USE
• The appliance is designed for indirect cooking of foods in cooking receptacles and for keeping food warm in a bain marie.
• Do not activate the heating system when there is no water in
the well.
• While the appliance is on, the water level must be maintained
level with or above the minimum level indicated on the wall
of the well.
• At the end of each day, clean the well thoroughly in order to
prevent the formation of corrosive deposits.
The control knob has the following positions:
0 Off
1 On
Switching on
• Turn the knob to position "1" ”.
• Lighting up of indicator ( if present) signals that the appliance
is on and heating is by an infrared lamp (heating element).
FILLING AND EMPTYING THE WELL
Switching off
Filling
• Turn the thermostat knob to position "0".
• Turn the knob to position “ 0 ”.
• Close the water drainage tap on the control panel.
• Fill the well until the water is level with the maximum level indicated on the wall of the well. Do not use the appliance with
the water level above the maximum indicated level.
Emptying
• Open the well drain tap (knob on front panel).
SWITCHING ON AND OFF
The thermostat control knob has the following positions:
0 Off
30 Minimum water temperature
90 Maximum water temperature
Switching on
• Turn the thermostat knob to the chosen temperature setting
for cooking.
• The yellow indicator light switches on.
• The yellow indicator light switches off when the oven reaches
the set temperature.
EMPTYING OF CONTAINER
• Take off container from appliance.
• To do this follow this indications: protect hands from heat (for
example using suitable gloves); protect body from accidental
hot sprinkles during lifting, transport and emptying of container.
• The container where hot foods are emptied must be large
enough and of heat resistant material.
11 PROLONGED DISUSE
Before any prolonged disuse of the appliance, proceed as follows:
• Clean the appliance thoroughly.
• Rub stainless steel surfaces with a cloth soaked in Vaseline
oil to create a protective film.
• Leave lids open.
• Shut off taps and main switches upline of appliances.
Following prolonged disuse, proceed as follows:
• Inspect the appliance thoroughly before using it again.
• Allow electric appliances to operate at the lowest temperature for at least 60 minutes.
INSTRUCTIONS FOR CLEANING
Switching off
• Turn the thermostat knob to position "0".
REMINDERS FOR CLEANING
10 USING THE POTATO WARMER
The manufacturer will not be liable for any damage or injury resulting from failure to observe the following rules
REMINDERS FOR USE
• Appliance works without water. Foods are heated directly in
the removablec ontainer supplied with the appliance.
• Disconnect the appliance electric supply, if present, before
carrying out any operation.
• Clean the satin finish stainless steel exterior surfaces, the
cooking wells and the surface of the hotplates every day.
19
• At least twice a year, have an authorized technician clean the
internal parts of the appliance.
• Do not use direct or high pressure water jets to clean the
appliance.
• Do not use corrosive products to clean the floor beneath the
appliance.
• Temperature thermostat defective.
SATIN FINISH STAINLESS STEEL SURFACES
• Temperature thermostat defective.
• Heating elements defective.
• Clean the surfaces with a cloth or sponge using water and
proprietary non-abrasive detergents. Follow the direction of
the satin finish lines. Rinse repeatedly and dry thoroughly.
• Do not use pan scourers or other iron items.
• Do not use chemical products containing chlorine.
• Do not use sharp objects which might scratch and damage
the surfaces.
COOKING WELLS
• Clean the wells by bringing the water to the boil, with the addition of grease remover detergent if necessary
• Remove any limescale deposits with a proprietary limescale
remover
INSTRUCTIONS FOR MAINTENANCE
REMINDERS FOR THE MAINTENANCE TECHNICIAN
The manufacturer will not be liable for any damage or injury resulting from failure to observe the following rules
• Read this manual carefully. It provides important information
for safe installation, use and maintenance of the appliance.
• Installation, conversion to a different type of gas and appliance maintenance must be carried out by qualified technicians
authorized by the manufacturer, in compliance with current
safety standards and the instructions in this manual.
• Identify the specific appliance model. The model number is
detailed on the packing and on the appliance data plate.
• The appliance must be installed in a well-ventilated room.
• Do not obstruct any air vents or drains present on the appliance.
• Do not tamper with appliance components.
13.2
POTATO WARMER
The appliance does not heat.
Possible causes:
Heating cannot be adjusted
Possible causes:
• Temperature thermostat defective.
14 REPLACING COMPONENTS
REMINDERS FOR REPLACING COMPONENTS.
• Disconnect the appliance electric supply, if present, before
carrying out any operation.
• After replacing a gas system component, check for gas leaks
at connection points.
• After replacing an electrical system component, check it is
correctly wired.
14.1
ELECTRIC BAIN MARIE
Replacing the heating element and the indicator light
• Remove the control panel.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse order.
Working thermostat replacement
•
•
•
•
Remove the control panel.
Remove the bulb from its seat on the well.
Remove and replace the component.
Re-assemble all parts. For assembly, proceed in reverse order.
14.2
POTATO WARMER
12 COMMISSIONING
Following installation, conversion to a different type of gas or
any maintenance operations, check appliance operation.In the
event of any malfunction, consult the next Paragraph "Troubleshooting".
Replacing the infrared heating
12.1 ELECTRICAL APPLIANCES
Replacing the heating element
Switch on the appliance as directed in the instructions and reminders for use given in Chapter " INSTRUCTIONS FOR USE
" and check:
• the current values of each phase.
• the correct operation of the heating elements.
• Pull out the control knobs , remove control panel and the container.
• Disconnect the faulty heating element, removeand replace it.
Have care to fit in right position the fixing flange seal (better
replace it).
13 TROUBLESHOOTING
15 CLEANING THE INTERIOR
13.1
• Check the condition of the inside of the appliance.
• Remove any built-up dirt.
• Check and clean the fumes exhaust system.
ELECTRIC BAIN MARIE
The appliance does not heat.
Possible causes:
• Temperature thermostat defective.
• Heating elements defective.
Heating cannot be adjusted
Possible causes:
20
• Remove the healting support.
• Remove and replace the component.
• Re-assemble all parts. For assembly, proceed in reverse order.
16 MAIN COMPONENTS
16.1
•
•
•
•
ELECTRIC BAIN MARIE
Working thermostat
Heating element
Indicator light
Control knob
16.2
•
•
•
•
•
POTATO WARMER
Working thermostat
Indicator light
Control knob
Infrared heating element
Heating element
21

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project