advertisement
▼
Scroll to page 2
Coliseum Installation Series Overview The new Canadian made Coliseum C15W installation loudspeaker uses a solid birch plywood cabinet construction, all metal grill and rotatable ABS 80° x 50° horn. Ample integrated flypoints for firm attachment to custom designed Yorkville flyware ensure cost effective rigging in single cabinet or arrays. Additional Omnimount compatible rigging points make the 500 watt C15 an ideal solution for larger commercial installation or House of Worship PA applications. Optional FH2W - C12W / C15W Flying Hardware The FH2W hardware kit has been specifically designed to expand the C12W and C15W's already advanced mounting capabilities. A single FH2W installation kit is the ideal rigging solution for installing either Yorkville Coliseum Series C12W or C15W speakers in single point hangs for solo cabinets or two-box arrays. The staggered hole pattern in the FH2W allows for a multitude of tilt angles simply by moving the shackle towards front or the rear of the bracket. If further down-tilt is required, simply attach an eyebolt in the pullback position of the cabinet in addition to the hang point. When using C12W or C15W cabinets in two cabinet arrays, the FH2W splays the loudspeakers at the ideal angles to minimize interference and lobing. Features • 500 Watts / 8 ohms • 15-inch Woofer • 1-inch Horn Driver with 3-inch Voicecoil • 80° x 50° Rotatable Horn • Nine Integrated 1/4-20 flypoints • Optional Versatile FH2W Flying Hardware Available • Also Compatible with 120.0WA Omnimount Bracket • Solid Birch Cabinet Construction • Extensive Internal Metal Bracing for Added Security and Long Term Reliability • All Metal Grille • Speakon™ & Terminal Strip Input y o r k v i l l e. c o m C15W Coliseum Installation Series C15W Specifications System Type Two Way Active or Passive Passive Program Power (Watts) 500 Biampable No Nominal Impedance (Ohms) 8 Sensitivity (dB @1Watt/1m) 99 Max SPL (dB) 126 Frequency Response (Hz +/- 3dB) 50 - 20k Crossover Frequency (Hz) 1100 Driver Configuration 15 inch / 1 inch HF Driver(s) 1 inch Mylar HF Horn Rotatable ABS Waveguide HF Dispersion (°H x °V) 80 x 50 Rotatable HF Protection CTL Inputs - Speakon 4-pin 2 Inputs - Screw Terminal 1 Pair Flying Hardware 1/4 inch Optional Flying Hardware FH2W Flyware is available Enclosure Materials 15mm (5/8inch) 11-ply Russian birch Grille Perforated Metal Covering / Finish Two Part White Epoxy Other Details Has rear mounted rigging points for Omnimount 120.0WA bracket Dimensions (DWH xbackW, inches) 15.4 x 20.9 x 28.7 x 15.7 Dimensions (DWH xbackW, cm) 39.1 x 53.1 x 72.9 x 39.8 Weight (lbs/kg) 75 / 34.2 Specifications subject to change without notice y o r k v i l l e. c o m
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project