BOSS WAZA Tube Amp Expander Tube Amp Expander Owner Manual

BOSS WAZA Tube Amp Expander Tube Amp Expander Owner Manual

Using WAZA Tube Amp Expander IR Loader

This document explains basic operation of WAZA Tube Amp Expander IR Loader (subsequently referred to as “IR Loader”).

Added Functions in the WAZA Tube Amp Expander (Ver.2)

The functions added in WAZA Tube Amp Expander Ver.2 are described below.

Added functions

5 The number of IR data that can be loaded has been increased to 32 (USER1–USER32).

Preparing to Use IR Loader Mac OS users

1. Download “WAZA Tube Amp Expander IR Loader” from the product support page.

2. Double-click the downloaded file to decompress it.

3. Inside the folder created by decompressing the file, double-click “WAZA-TAE IR Loader Installer.pkg.”

Installation begins.

Proceed with installation as directed by the installation screens.

When the display indicates “The installation was successful. The software was installed.,” click the [Close] button.

Installing the USB Driver

Before you use IR Loader, the appropriate USB driver for the product you’re using must be installed on your computer.

1. From the product support page, download the WAZA-TAE Driver.

To obtain the latest USB driver, access the following URL, and download and install the appropriate driver for the product you’re using.

http://www.boss.info/support/ 2. Double-click the downloaded WAZA-TAE Driver.

Installation begins.

Proceed with the installation as directed by the installation screens.

When the screen indicates “Installation has been completed.” click the [Close] button.

The WAZA-TAE Driver has been installed on your computer.

Installing IR Loader

MEMO

Before you install IR Loader, the USB driver must be installed in your computer as described in “Installing the USB Driver.”

Windows users

1. Download “WAZA Tube Amp Expander IR Loader” from the product support page.

2. Double-click the downloaded file to decompress it.

3. Inside the folder created by decompressing the file, double-click “WAZA-TAE IR Loader Installer.exe.”

Installation begins.

Proceed with installation as directed by the installation screens.

When the screen indicates “Installation has been completed.” click the [Close] button.

© 2019 Roland Corporation

1

Using WAZA Tube Amp Expander IR Loader Starting IR Loader

* WAZA Tube Amp Expander IR Loader cannot be used simultaneously with WAZA Tube Amp Expander Editor. Close editor before you start this application.

1. Use a USB cable to connect the WAZA Tube Amp Expander to your computer, and then turn on the power of the WAZA Tube Amp Expander.

2. In the [Start] menu, choose [All Programs]

&

[WAZA Tube Amp Expander]

&

[WAZA Tube Amp Expander IR Loader].

The “Connect” dialog box appears.

Loading IR Data into the WAZA Tube Amp Expander

1. Click the [Load] button.

The IR data selection dialog box appears.

Mac OS users

From the Finder, in the application/BOSS/WAZA Tube Amp Expander folder, double-click [WAZA Tube Amp Expander IR Loader (.app)].

3. Choose “WAZA-TAE” for MIDI IN and MIDI OUT, and then click the [OK] button.

2. Select the IR data that you want to load, and click the [Open] button.

Conversion of IR data begins so that it can be loaded into the WAZA Tube Amp Expander.

When IR data conversion ends, the load-destination selection dialog box appears.

MEMO

5 It might take some time for IR data to be converted.

5 The converted IR data is automatically given a name. You can edit this name as necessary.

3. Select the load-destination (“USER-1”–”USER-32”), and click the [OK] button.

The converted IR data is loaded.

Format of IR data that can be loaded

Format (extension) Sampling frequency Bit rate

WAV (.wav) 44.1, 48, 96 kHz 16, 24-bit linear format

2

When loading is completed, you return to the main screen.

02

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement