BOSS WAZA-AIR Wireless Personal Guitar Amplification System Owner Manual

6. Verify that “WAZA-AIR MIDI (Bluetooth)” is shown for “CONNECT.” WAZA-AIR MIDI (Bluetooth) 7. Tap [OK] to start communication.

If you can’t connect

Check each of the following five items one at a time.

1 In the settings of the WAZA-AIR unit, is the Bluetooth function turned on?

Verify that the WAZA-AIR unit’s Bluetooth indicator is blinking or lit.

If it is unlit, press the Bluetooth Multi Function button to make it blink.

2

In step 2 of the procedure (p. 2), could

you have tapped a model name shown on the mobile device?

When you turn the Bluetooth switch on in step 2, “WAZA-AIR MIDI” might appear in the list of “DEVICES” but you should not tap it. If you tapped

it, clear the pairing, and try the procedure again from step 1.

Clearing the pairing

1. Tap the “i” located beside “Connected,” and then “Forget This Device.” 2. Turn the Bluetooth switch off.

3 Turn Bluetooth on and off once again

Turn Bluetooth on/off again.

4 Close all apps, and try the procedure again

from step 1 (p. 2)

If you’ve checked mobile device.

1

–

3

and still cannot connect to the app, close all apps that are running on your If the WAZA-AIR is paired, clear the pairing.

Closing the app

Double-click the home button, and swipe up on the app screen.

* If you’re using the iPhone X (XR, or Xs) the procedure for closing an app is different. Close the app as appropriate for the iPhone X.

5 Power-off the mobile device and the WAZA-AIR unit, and then power them on again

If you’ve checked to the app, power-off the mobile device and the WAZA-AIR, wait for about 10 seconds, and power them on again.

1

–

4

and still cannot connect If the WAZA-AIR is paired, clear the pairing.

If you’ve checked

1

– to the app, contact your dealer or a Roland customer service center.

5

and still cannot connect