Brother MFC-J885DW User's Guide
Brother MFC-J885DW is a multi-function printer that can print, copy, scan, and fax documents. It has a print speed of up to 12ppm for black and white documents and 10ppm for color documents. The MFC-J885DW also has a built-in scanner with a resolution of up to 1200 x 2400 dpi. It can scan documents to a variety of file formats, including PDF, JPEG, and TIFF. The MFC-J885DW also has a built-in fax machine with a speed of up to 33.6kbps. It can send and receive faxes from a variety of locations, including landlines, mobile phones, and email addresses. The MFC-J885DW is a versatile and affordable multi-function printer that is perfect for home or small office use.
Advertisement
Advertisement
Basic User's Guide MFC-J680DW MFC-J880DW MFC-J885DW
Online User's Guide
This Basic User's Guide contains basic instructions and information for your Brother machine.
For more advanced instructions and information, see the Online User's Guide at solutions.brother.com/manuals
If you need to call Customer Service
Please complete this information for future reference:
1
Model Number: (Circle your model number)
Serial Number: 1
Date of Purchase: Place of Purchase:
MFC-J680DW/MFC-J880DW/MFC-J885DW
The serial number is on the back of the machine. Retain this User’s Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service.
Register your product online at http://www.brother.com/html/registration
By registering your product with Brother, you will be recorded as the original owner of the product. Your registration with Brother: • may serve as confirmation of the purchase date of your product should you lose your receipt; • may support an insurance claim by you in the event of product loss covered by insurance; and, • will help us notify you of enhancements to your product and special offers.
The most convenient and efficient way to register your new product is online at http://www.brother.com/html/registration.
© 2015 Brother Industries, Ltd. All rights reserved.
Brother Numbers
IMPORTANT
For technical help, you must call the country where you bought the machine. Calls must be made
from within
that country.
Register Your Product
By registering your product with Brother International Corporation, you will be recorded as the original owner of the product. Your registration with Brother: • may serve as confirmation of the purchase date of your product if you lose your receipt; • may support an insurance claim by you in the event of product loss covered by insurance; and, • will help us notify you of enhancements to your product and special offers.
Complete and fax the Brother Warranty Registration and Test Sheet, or register on-line at
http://www.brother.com/registration FAQs (Frequently Asked Questions)
The Brother Solutions Center is our one-stop resource for all your Fax Machine/Multi-Function Center needs. Download the latest software and utilities and read FAQs and troubleshooting tips to learn how to get the most from your Brother product.
http://support.brother.com
• Check here for Brother driver updates.
• To keep your machine’s performance up to date, check here for the latest firmware upgrade.
i
For Customer Service In USA:
http://www.brother-usa.com/support (Self-Service/Email/Chat) 1-877-BROTHER (1-877-276-8437) 1-901-379-1215 (assistance via fax) 1-877-268-9575 (test your fax sending and fax receiving operations)
In Canada:
http://www.brother.ca/support (Self-Service Videos, Email, Chat, Facebook and Twitter Help)
Service Center Locator (USA only)
For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437) or visit http://www.brother-usa.com/service.
Service Center Locations (Canada only)
For the location of a Brother authorized service center, visit http://www.brother.ca/support.
ii
Ordering Accessories and Supplies
For best quality results use only genuine Brother supplies, which are available at most Brother retailers. If you cannot find the supplies you need and have a Visa, MasterCard, Discover, American Express credit card, or PayPal account, you can order directly from Brother. Visit us online for a complete selection of the Brother accessories and supplies that are available for purchase.
NOTE
In Canada, only Visa and MasterCard are accepted.
In USA:
1-877-552-MALL (1-877-552-6255) 1-800-947-1445 (assistance via fax)
http://www.brothermall.com
In Canada: http://www.brother.ca
Order Information Description
Ink Cartridge Standard Yield
Item
LC201BK / LC201Y / LC201C / LC201M
LC203BK / LC203Y / LC203C / LC203M
BP71GLTR BP71GP20
BP60MPLTR (USA only) LG3077001 (USA only) LEW532001 (English for USA and Canada) LEW532002 (French for Canada) LEU309001 (MFC-J680DW) LEU308001 (MFC-J880DW/MFC-J885DW) 1 For more information about the replacement supplies, visit http://www.brother.com/pageyield.
iii
Notice - Disclaimer of Warranties (USA and Canada)
BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKE NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES IN THE USA AND SOME PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU. IN ANY EVENT BROTHER’S LICENSOR’S LIABILITY TO YOU FOR ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE FORM OF THE ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
iv
You Can Use the Following Features Mobile Connect
Use Brother iPrint&Scan to check the machine status and access various functions from mobile devices.
(MFC-J880DW/MFC-J885DW) If your Android ™ device supports Near Field Communication (NFC), print and scan just by touching your device to the NFC logo on the control panel.
By installing Brother iPrint&Scan on your mobile device and connecting to the machine, you can use the following convenient features: • Print You can print photos, documents, and web pages from your mobile device. You can also print files from various web services.
• Scan You can scan photos and documents and save them to your mobile device.
• Copy You can use your mobile device to edit scanned images (crop and rotate images), and then print them using the machine.
• Fax You can fax photos and documents that are stored on your mobile device. You can also view faxes, which are received by the machine, on your mobile device.
• Check the Machine Status You can check the remaining ink levels and other information, and view error solutions.
For more information, see the
Mobile Print/Scan Guide for Brother iPrint & Scan
: solutions.brother.com/manuals
Web Connect / Brother Apps
Scan and upload images and files to popular web services directly from your machine.
Capture and convert information directly from your machine without your computer.
For more information, see the
Web Connect Guide
: solutions.brother.com/manuals Printing Scanning
v
User's Guides and Where to Find Them Which Guide?
Product Safety Guide Quick Setup Guide Basic User's Guide
What's in It?
Read this Guide first. Please read the Safety Instructions before you set up your machine.
See this Guide for trademarks and legal limitations.
Follow the instructions for setting up your machine, and installing the drivers and software for the operating system and connection type you are using.
Learn the basic Fax, Copy, Scan and PhotoCapture Center operations and basic machine maintenance. See troubleshooting tips.
Online User's Guide Web Connect Guide This guide includes the contents of the Basic User’s Guide, and additional information about the machine’s settings and operations, security features, troubleshooting tips, and maintenance instructions.
In addition to information about the PC-Print, Scan, Copy, Fax, PhotoCapture Center and Brother ControlCenter operations, useful information is included about using the machine on a network.
This Guide provides useful information about accessing Internet services from the Brother machine, as well as downloading images, printing data and uploading files directly to Internet services.
AirPrint Guide Google Cloud Print Guide This Guide provides details about how to use Google Cloud Print ™ services for printing over the Internet.
Mobile Print/Scan Guide for Brother iPrint&Scan This Guide provides information for using AirPrint to print from OS X v10.8.5 or later and your iPhone, iPod touch, iPad, or other iOS device to your Brother machine without installing a printer driver.
This Guide provides useful information about printing from your mobile device and scanning from your Brother machine to your mobile device when connected to a Wi-Fi ® network.
1 Visit solutions.brother.com/manuals.
Where Is It?
Printed / In the box Printed / In the box Printed / In the box HTML and PDF file / Brother Solutions Center
PDF file / Brother Solutions Center
PDF file / Brother Solutions Center
PDF file / Brother Solutions Center
PDF file / Brother Solutions Center
vi
Basic Operations and Where to Find Instructions
The contents of the Basic User's Guide are also included in the Online User's Guide with more details.
Features Setup Copy Print Fax Scan Photo Additional information Contents
Load paper Connect the machine to your computer Connect the machine to your mobile device Copy a document Various types of copies (2-sided copies, and so on) Print from your computer (Windows ® / Macintosh) Print from your mobile device (Brother iPrint&Scan) Print using the AirPrint function Print using the Google Cloud Print function Print data downloaded from a cloud service Send and receive a fax Transfer a fax to your computer Send and receive a fax using your computer Send and view a fax using your mobile device (Brother iPrint&Scan) Scan from the machine Scan from your computer Scan from your mobile device (Brother iPrint&Scan) Save scanned data to a cloud service Print a photo Error messages Troubleshooting Specifications
Guide
Basic User's Guide Quick Setup Guide Quick Setup Guide Basic User's Guide Online User's Guide Basic User's Guide Mobile Print/Scan Guide AirPrint Guide Google Cloud Print Guide Web Connect Guide Basic User's Guide Online User's Guide Basic User's Guide Mobile Print/Scan Guide Basic User's Guide Basic User's Guide Mobile Print/Scan Guide Web Connect Guide Basic User's Guide Basic User's Guide Basic User's Guide Online User's Guide
vii
2 1
The Online User's Guide Helps You Get the Most Out of Your Machine
We hope that you find this guide helpful. To learn more about your machine's features, please take a look at our Online User's Guide. It offers:
Quicker navigation!
Search box Navigation index in a separate panel
Comprehensive!
Every topic in one guide
Simplified Layout!
Provides step-by-step instructions Feature summary at the top of the page 3 4 1. Search Box 2. Navigation 3. Summary 4. Step-by-Step
To View Online User's Guides
To view the Online User's Guide and other available guides, visit solutions.brother.com/manuals.
For Windows users only: you can also access your machine's guides by using Brother Utilities.
The Brother Utilities tool is included in the standard installation and, once installed, you can find it either as a shortcut on your desktop, or from the Windows Start menu.
viii
Questions or Problems? Please take a look at our FAQs, solutions, and videos online.
Go to your model's FAQs & Troubleshooting page on the Brother Solutions Center at http://support.brother.com
•
Provides several ways to search!
•
Displays related questions for more information
•
Receives regular updates based on customer feedback
Since the Brother Solutions Center is updated regularly, this screenshot is subject to change without notice.
ix
Definitions of Notes
We use the following symbols and conventions throughout this User's Guide:
IMPORTANT
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in damage to property or loss of product functionality.
NOTE
NOTE specifies the operating environment, conditions for installation, or special conditions of use.
Tips icons provide helpful hints and supplementary information.
Bold
Bold style identifies buttons on the machine's control panel or computer screen.
Italics
Italicized style emphasizes an important point or refers you to a related topic.
[Courier New]
Courier New font identifies messages shown on the machine's LCD.
• Most of the illustrations in this User's Guide show the MFC-J880DW.
x
For the Latest Driver Updates
Go to your model's
Downloads
page on the Brother Solutions Center at http://support.brother.com to download drivers.
To keep your machine’s performance up-to-date, check there for the latest firmware upgrades.
Compilation and Publication Notice
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product's descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.
xi
Table of Contents
Basic User's Guide
1
2
Uninstall the Brother Software and Drivers (Windows ® ) .................................7
3
Load Paper in the Manual Feed Slot .............................................................10
Change the Check Paper Size Setting ..........................................................13
4 5
Print Photos from ControlCenter4 (Windows ® ) .............................................16
Scan Using ControlCenter4 Home Mode (Windows ® ) ..................................22
Scan Using the Scan Button on Your Brother Machine...........................................23
Scan Using the Scan Button on the Machine ................................................23
xii
6
7 A B
Preview and Print Photos and Movie Files from Media .................................25
PhotoCapture Center print settings overview ................................................25
Telephone Line Interference/VoIP..................................................................26
Choose the Correct Receive Mode................................................................28
Set the F/T Ring Time (Pseudo/Double-ring).................................................29
Set the Number of Rings Before the Machine Answers (Ring Delay) ...........29
Store Address Book Numbers .......................................................................30
Change or Delete Address Book Names or Numbers ...................................30
Voice Over Internet Protocol (VoIP)...............................................................32
Connection of an External Telephone Answering Device (TAD)....................32
External and Extension Telephones ..............................................................32
Send Faxes from Your Computer ..................................................................37
Receive Faxes on Your Computer (Windows ® only) .....................................37
Check the Print Alignment from Your Brother Machine ...........................................41
Transfer Your Faxes or Fax Journal Report...................................................51
Wireless LAN Report Error Codes.................................................................52
Troubleshooting for Other Fax Problems.......................................................55
xiii
C
Troubleshooting for Other Print Problems .....................................................59
D
xiv
1
General Information
Control Panel Overview MFC-J680DW
1 2 3
1. 2.7" Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on this Touchscreen.
Adjust the angle of the Touchscreen LCD and Touchpanel by lifting it.
2. Touchpanel (Back)
Press to go back to the previous menu.
(Home)
Press to return to the Home screen.
While the machine is in Sleep Mode, the Home icon blinks.
(Cancel)
Press to cancel an operation (available when illuminated in red).
1
3.
Power On/Off
Press to turn on the machine .
Press and hold down to turn off the machine. The Touchscreen will display [Shutting Down] and will stay on for a few seconds before turning itself off. If you have connected an external telephone or TAD, it is always available.
If you turn off the machine using , it will still clean the print head periodically to maintain print quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.
MFC-J880DW/MFC-J885DW
1 2 3 4
1.
NFC (Near Field Communication) logo
• If your Android ™ device supports the NFC feature, you can print from your device or scan documents to your device by touching it to the NFC logo on the control panel.
2. 2.7" Touchscreen Liquid Crystal Display (LCD)
Access menus and options by pressing them on this Touchscreen.
Adjust the angle of the Touchscreen LCD and Touchpanel by lifting it.
2
3. Touchpanel (Back)
Press to go back to the previous menu.
4.
(Home)
Press to return to the Home screen.
While the machine is in Sleep Mode, the Home icon blinks.
(Cancel)
Press to cancel an operation (available when illuminated in red).
Power On/Off
Press to turn on the machine .
Press and hold down to turn off the machine. The Touchscreen will display [Shutting Down] and will stay on for a few seconds before turning itself off. If you have connected an external telephone or TAD, it is always available.
If you turn off the machine using , it will still clean the print head periodically to maintain print quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.
3
Touchscreen LCD Overview
There are two Home screens that you can access by pressing d or c .
From the Home screens, you can access Wi Fi setup, Shortcuts, Ink levels and Setup screens.
Home Screen 1
1 2 3 4 5 6 7 This screen shows the machine’s status when the machine is idle. This Home screen is also called the Ready Mode screen. When displayed, this indicates that your machine is Ready for the next command.
Home Screen 1 provides access to [Fax] , [Copy] and [Scan] operations.
Home Screen 2
1 2 3 2.
Quiet Mode
This icon appears when the [Quiet Mode] setting is set to [On] .
The Quiet Mode setting can reduce printing noise. When Quiet Mode is turned on, the print speed becomes slower.
(MFC-J680DW/MFC-J885DW in USA only) Demo appears when you purchase a Brother machine. After you print from a computer or use iPrint&Scan, Demo will disappear from the Home screen.
While Demo appears, not displayed.
(
Quiet Mode
) is 3.
Wireless Status
Each icon in the following table shows the wireless network status.
Your machine has not been connected to the wireless access point.
Press this button to configure wireless settings. For more information, see the
Quick Setup Guide
.
Wireless network is connected.
A three-level indicator in each of the Home screens displays the current wireless signal strength.
The wireless access point cannot be detected.
The wireless setting is disabled.
4 5 6 7 Home Screen 2 provides access to additional features, such as [Photo] , [Web] and [Apps] operations.
1.
Date & Time
Displays the date and time set on the machine.
You can configure wireless settings by pressing the Wireless Status button.
4.
[Shortcuts]
Create Shortcuts for frequently-used operations such as sending a fax, copying, scanning and using Web Connect.
4
• There are three Shortcuts screens.
You can program four shortcuts on each screen.
• To display the other Shortcuts screens, press d or c .
5.
[Ink]
Displays the available ink volume. Press to access the [Ink] menu.
When an ink cartridge is near the end of its life or having a problem, an error icon is displayed on the ink color.
6.
[Settings]
7.
Press to access the [Settings] menu.
Modes:
•
[Fax]
Press to access Fax mode.
•
[Copy]
Press to access Copy mode.
•
[Scan]
Press to access Scan mode.
•
[Photo]
Press to access Photo mode.
•
[Web]
Press to connect the Brother machine to an Internet service.
• For more information, see the
Web Connect Guide
: solutions.brother.com/ manuals
[Apps]
8.
Press to connect the Brother machine to the Brother Apps service.
For more information, see the
Web Connect Guide
: solutions.brother.com/ manuals
[Stored Fax(es):]
8 When
is set to [Off] , [Stored Fax(es)] memory.
displays how many received faxes are in the machine's Press [Print] to print the faxes.
1 MFC-J880DW/MFC-J885DW only
5
9.
[New Fax(es):]
(MFC-J880DW/MFC-J885DW) 9 When [Fax Preview] is set to [On] , [New Fax(es)] memory.
displays how many new faxes you have received and stored in the Press [View] to view the faxes on the Touchscreen.
10.
Warning icon
10 • This product adopts the font of ARPHIC TECHNOLOGY CO.,LTD.
• DO NOT touch the LCD immediately after plugging in the power cord or turning on the machine. Doing this may cause an error.
Cloud Service Notifications
If you use Brother Web Connect and [New Function Notice] on the Home screen.
is set to [On] , notifications about cloud services will appear Check for new notifications by pressing [Detail] .
The warning icon appears when there is an error or maintenance message; press [Detail] to view it, and then press to return to Ready mode.
IMPORTANT
DO NOT press the LCD with a sharp object such as a pen or stylus. It may damage the machine.
6
Access Brother Utilities (Windows ® ) Brother Utilities
is an application launcher that offers convenient access to all Brother applications installed on your computer.
1
Do one of the following: • (Windows ® XP, Windows Vista ® and Windows ® 7) Click
(Start)
>
All Programs
>
Brother
>
Brother Utilities
.
• (Windows ® 8) Tap or click (
Brother Utilities
) either on the
Start
screen or the desktop.
• (Windows ® 8.1) Move your mouse to the lower left corner of the
Start
screen and click (if you are using a touch-based device, swipe up from the bottom of the
Start
screen to bring up the
Apps
screen).
When the
Apps
screen appears, tap or click (
Brother Utilities
).
2
Select your machine.
3
Choose the operation you want to use.
Uninstall the Brother Software and Drivers (Windows
®
)
1
Launch (
Brother Utilities
).
2
Click the drop-down list, and then select your model name (if not already selected). Click
Tools
in the left navigation bar, and then click
Uninstall
.
Follow the instructions in the dialog box to uninstall the software and drivers.
7
2
Paper Handling
Load Paper Load paper in the paper tray
3
Gently press and slide the paper width guides (1) and then the paper length guide (2) to fit the paper size.
1 • If the [Check Paper] setting is set to [On] and you pull the paper tray out of the machine, a message appears on the LCD asking if you want to change the paper type and paper size. Change the Paper Size and Paper Type settings if needed, following the on-screen instructions.
• Load only one size and type of paper in the paper tray at a time.
• When you load a different paper size in the tray, you must change the Paper Size setting in the machine or the paper size setting on your computer.
1
Pull the paper tray completely out of the machine.
2 When you are using Legal size paper, press the square paper tray expansion button (1) and slide out the paper tray until the square paper tray expansion button locks into the square LGL hole.
1
2
Open the output paper tray cover (1).
1
8
4
Fan the stack of paper well.
5
Gently load paper in the paper tray with the printing surface
face down
.
To add paper before the tray is empty, remove the paper from the tray and combine it with the paper you are adding.
Always fan the stack of paper well to prevent the machine from feeding multiple pages.
6
Gently adjust the paper width guides (1) to fit the paper.
Make sure the paper guides touch the edges of the paper.
1 Make sure the paper is flat in the tray and the paper length guide (1) touches the edges of the paper.
7
Close the output paper tray cover.
Slowly push the paper tray completely into the machine.
1
IMPORTANT
• Be careful not to push the paper in too far; it may lift at the back of the tray and cause paper feed problems.
• Loading more than 20 sheets of Photo 2L (5" x 7")/(13 x 18 cm) paper may cause paper jams.
8
While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
1 2
9
Load Photo Paper
Use the photo bypass tray, which is located on the top of the output paper tray cover, to print on Photo (4" x 6")/(10 x 15 cm) or Photo L (3.5" x 5")/(89 x 127 mm) size paper.
In Canada, the photo bypass tray is called the photo paper tray.
1
Press the blue photo bypass tray release button (1) and slide the output paper tray cover forward until it locks into the photo printing position (2).
1 2 guides (1) touch the edges of the paper and the paper is flat in the tray.
1
IMPORTANT
When you have finished printing photos, return the photo bypass tray to the Normal printing position. If you do not, you will get a [No Paper Fed] error when you use cut sheet paper.
Photo Bypass Tray in the Normal printing position 2
Load up to 20 sheets of photo paper in the photo bypass tray with the printing surface
face down
.
Photo Bypass Tray in the Photo printing position 3
Gently adjust the paper width guides to fit the paper. Make sure the paper width
Related Information
• Print Photos from ControlCenter4 (Windows ® ) on page 16
Load Paper in the Manual Feed Slot
Load special print media in this slot one sheet at a time.
10
IMPORTANT
• DO NOT load more than one sheet of paper in the manual feed slot at any one time. Doing this may cause a paper jam.
• DO NOT load paper in the manual feed slot when you are printing from the paper tray.
Doing this may cause a paper jam.
3
Slide the manual feed slot paper guides to fit the width of the paper you are using.
1
Open the manual feed slot cover.
4
Load only one sheet of paper in the manual feed slot with the printing surface
face up
.
2
Lift up the paper support.
11
5
Using both hands, gently adjust the manual feed slot paper guides to fit the paper.
until it locks into place, and then unfold the paper support flap (2).
6
Using both hands, push one sheet of paper into the manual feed slot until the front edge touches the paper feed rollers. Let go of the paper when you hear the machine pull it. The LCD displays [Manual Feed Slot ready.] [OK] .
. Read the instruction displayed on the LCD, and then press 2 1 • If the document does not fit on one sheet, the Touchscreen will prompt you to load another sheet of paper. Place another sheet of paper in the manual feed slot, and then press [OK] on the Touchscreen.
• When you are using envelopes, load the envelopes with the printing surface
face up
and the flap on the left as shown in the illustration.
7
While holding the paper tray in the machine, pull out the paper support (1) • When loading an envelope, or a sheet of thick paper, push the envelope into the manual feed slot until you feel the paper feed rollers grab it.
Related Information
• Error and Maintenance Messages on page 44
12
Change the Check Paper Size Setting
If the Check Paper setting is set to settings.
[On] and you pull the paper tray out of the machine, the LCD displays a message asking if you want to change the Paper Size and Paper Type The default setting is [On] .
Change the Paper Size and Paper Type
Set the Paper Size and Paper Type settings for the paper tray.
• To get the best print quality, set the machine for the type of paper you are using.
• When you change the size of the paper you load in the tray, you must change the Paper Size setting on the LCD at the same time.
1
Press [Settings] > [All Settings] > [General Setup] > [Check Paper] .
2
Press [On] or [Off] .
3
Press .
Related Information
• Error and Maintenance Messages on page 44
1
Do one of the following: • (MFC-J680DW) Press Type] .
[Settings] > [Paper • (MFC-J880DW/MFC-J885DW) Press [Settings] > [Tray Setting] > [Paper Type] .
2
Press a or b to display the [Plain Paper] , [Inkjet Paper] , [Brother BP71] or [Other Glossy] option, and then press the option you want.
3
Press [Paper Size] .
4
Press want.
a or b to display the paper size options, and then press the option you
5
Press .
The machine ejects paper with the printed surface face up onto the paper tray at the front of the machine. When you use glossy paper, remove each sheet at once to prevent smudging or paper jams.
13
Related Information
• Error and Maintenance Messages on page 44
Recommended Print Media
For the best print quality, we recommend using the Brother paper listed in the table.
Brother paper
Paper Type Item
Premium Plus Glossy Photo Letter 4" x 6" BP71GLTR BP71GP20
Handle and Use Print Media
• Store paper in its original packaging and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat.
• Avoid touching the shiny (coated) side of photo paper.
IMPORTANT
DO NOT use the following kinds of paper: • Damaged, curled, wrinkled, or irregularly shaped 1 1 1.
0.08 in. (2 mm) or greater curl may cause jams to occur.
• Extremely shiny or highly textured • Paper that cannot be arranged uniformly when stacked • Paper made with a short grain
Paper capacity of the output paper tray cover
Up to 50 sheets of Letter, Legal or A4 20 lb (80 g/m²) paper.
• Photo paper must be picked up from the output paper tray cover one page at a time to avoid smudging.
14
3
Print from Your Computer Print a Document (Macintosh)
For printing instructions, see the
Online User's Guide
:
Print from Your Computer (Macintosh)
.
Print a Document (Windows
®
) Print on Both Sides of the Paper Automatically (Automatic 2-sided Printing) (Windows
®
)
1
Select the print command in your application.
2
Select
Brother MFC-XXXX
(where XXXX is the name of your model).
3
Click
.
4
Complete your print operation.
For more information, see the
Online User's Guide
:
Print from Your Computer (Windows ® )
.
• Make sure the back cover is closed.
• If paper is curled, straighten it and put it back in the paper tray.
• Use regular paper or thin paper. DO NOT use bond paper.
• If the paper is thin, it may wrinkle.
1
Select the print command in your application.
2
Select
Brother MFC-XXXX
(where XXXX is the name of your model), and then click the printing properties or preferences button.
The printer driver window appears.
15
3
In the
Orientation
field, select either the
Portrait
or
Landscape
option to set the orientation of your printout.
If your application software contains a similar layout feature, we recommend using the one in the application.
4
Click the
2-sided / Booklet
drop-down list, and then select
2-sided
.
5
Click the
2-sided Settings
button.
6
Select one of the options from the
2
‑
sided Type
menu.
7
Select the
Binding Offset
in inches or millimeters.
check box if you want to specify the offset for binding
8
Click
OK
to return to the printer driver window.
9
Change other printer settings if needed.
The Borderless feature is not available when using this option.
10
Click
OK
again, and then complete your print operation.
Print More Than One Page on a Single Sheet of Paper (N in 1) (Windows
®
)
1
Select the print command in your application.
2
Select
Brother MFC-XXXX
(where XXXX is the name of your model), and then click the printing properties or preferences button.
The printer driver window appears.
3
In the
Orientation
field, select either the
Portrait
or
Landscape
option to set the orientation of your printout.
If your application software contains a similar layout feature, we recommend using the one in the application.
4
Click the
Multiple Page
drop-down list, and then select the
2 in 1
,
4 in 1
,
9 in 1
, or
16 in 1
option.
5
Click the
Page Order
drop-down list, and then select your page order.
6
Click the
Border Line
drop-down list, and then select your border line type.
7
Change other printer settings if needed.
8
Click
OK
, and then complete your print operation.
Print Photos from ControlCenter4 (Windows
®
)
You can print and edit photos using various ControlCenter features.
In the following steps, the ControlCenter Home mode is used as an example.
1
Make sure you have loaded the correct media in the paper tray.
2
Click the (
ControlCenter4
) icon in the task tray, and then click
Open
.
16
3
Click the
Photo
tab.
4
Select the folder that contains the image you want to print.
5
Select images you want to print by clicking the image in the image viewer and selecting the check box under the image.
6
Specify the number of copies you want to print (1-99) by clicking .
7
Click
.
The print settings window appears.
8
Configure the settings for the
Paper Size
,
Media Type
, and
Layout
options.
9
Click the
Start Printing
button.
Related Information
17
4
Copy
Copy a Document
1
Make sure you have loaded the correct size paper in the paper tray.
2
Do one of the following: • Place the document
face down
on the scanner glass.
3
• Place the document
face down
in the ADF.
(If you are copying multiple pages, we recommend using the ADF.) Press [Copy] .
The Touchscreen displays:
4
Change the copy settings, if needed.
• When you load paper other than Letter size Plain Paper, you must change the [Paper Size] and [Paper Type] settings by pressing the [Options] button.
• (No. of Copies ) Enter the number of copies in one of the following ways: • Press [-] or [+] on the Touchscreen.
• Press to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard.
Press [OK] .
• [Options] Press to change the copy settings for the next copy only.
• When finished, press [OK] .
• After you have finished choosing new options, you can save them by pressing the [Save as Shortcut] button.
5
Press [Black Start] or [Color Start] .
To stop copying, press .
18
Copy Settings Copy Options
To change copy settings, press the [Options] button.
Option
Quality Paper Type Paper Size Enlarge/Reduce Density Stack/Sort
Description
Select the Copy resolution for your type of document.
• When you select the Normal or Fast option, Plain Paper is the only Paper Type option.
Select a paper type.
If you are copying on special paper, set the machine for the type of paper you are using to get the best print quality.
Select a paper size.
If you are copying on paper other than Letter size, you must change the Paper Size setting.
100% Enlarge Reduce Select an enlargement ratio for the next copy.
Select a reduction ratio for the next copy.
Fit to Page Custom(25-400%) Adjusts the copy size to fit on the paper size you have set.
Enter an enlargement or reduction ratio.
Increase the density to make the text darker.
Decrease the density to make the text lighter.
Select to stack or sort multiple copies.
Stack A
B B
A A Sort A
B B
A
B
Page Layout
Make N in 1, 2 in 1 ID, or Poster copies.
4 in1 19
Option Description
Poster 2-sided Copy
Select to copy on both sides of the paper.
1-sided→2-sided 2-sided→2-sided Advanced Settings
2 2 Ink Save Mode (MFC-J880DW/MFC-J885DW) Prints colors lighter and emphasizes the outlines of images.
Thin Paper Copy (MFC-J880DW/MFC-J885DW) Avoid bleeding through thin paper when copying.
Book Copy (MFC-J880DW/MFC-J885DW) Correct dark borders and skew when copying from the scanner glass.
20
Option Description
Watermark Copy (MFC-J880DW/MFC-J885DW) Place text in your document as a watermark.
Remove Background Color Removes the document's background color in copies. The white background becomes more apparent. This saves some ink and may make certain copies easier to read.
Set New Default Factory Reset Save as Shortcut
Saves the copy settings that you use most often by setting them as the default settings.
Restores any changed copy settings to the factory settings.
Add the current settings as a shortcut.
(MFC-J880DW/MFC-J885DW) The Ink Save Mode, Thin Paper Copy, Book Copy and Watermark Copy features are supported by technology from Reallusion, Inc.
21
5
Scan
Scan from Your Computer (Windows ® )
There are several ways you can use your computer to scan photos and documents on your Brother machine. Use the software applications provided by Brother, or use your favorite scanning application.
Scan Using ControlCenter4 Home Mode (Windows
®
)
Select
Home Mode
as the mode setting for ControlCenter4.
1
Load your document.
2
Click the (
ControlCenter4
) icon in the task tray, and then click
Open
.
3
Click the
Scan
tab.
6
Click (
Scan
).
The machine starts scanning, and the scanned image appears in the image viewer.
7
If you scanned multiple pages using the ADF, click the left or right arrow buttons to preview each scanned page.
8
Crop the scanned image, if needed.
9
Do one of the following: • Click data.
(
Save
) to save scanned • Click data.
(
) to print scanned • Click (
Open with an Application
) to open scanned data in another application.
• Click (
Send E-mail
) to attach scanned data to an email.
• Click (
OCR
) to convert your scanned document to an editable text file.
4
Select the
Document Type
.
5
Change the document's
Scan Size
, if needed.
22
Scan Using the Scan Button on Your Brother Machine Scan Using the Scan Button on the Machine
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software.
1
Do one of the following: • Place the document
face down
on the scanner glass.
2
Press [Scan] > [to File] .
3
If the machine is connected over the network, press a or b to display the computer where you want to send data, and then press the computer name.
If the LCD prompts you to enter a PIN, use the LCD to enter the four-digit PIN for the computer, and then press [OK] .
4
Do one of the following: • To change the settings, press [Options] , and then go to the next step.
• Press [Start] to start scanning without changing additional settings.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
5
Press the [Scan Settings] option, and then press [Set at Device] .
To use the machine.
[Scan Settings] option, a computer with the ControlCenter software installed must be connected to the • Place the document
face down
in the ADF.
(If you are scanning multiple pages, we recommend using the ADF.)
23
6
Select the scan settings you want to change, and then press [OK] .
• [Scan Type] • Select the scan type for your document.
[Resolution] Select the scan resolution for your document.
• [File Type] Select the file format for your document.
• [Scan Size] Select the scan size for your document.
• [Remove Background Color] Change the amount of background color that is removed.
7
Press [Start] .
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to complete the scanning job.
24
6
PhotoCapture Center
Print Photos Directly from Media Preview and Print Photos and Movie Files from Media
Preview your photos on the LCD before you print them. Print images from movie files that are stored on a memory card or USB flash drive.
1
Open the media slot cover.
2
Put the memory card or USB flash drive in the correct slot.
3
Press [Photo] > [View Photos] .
4
Press d or c to display the photo you want to print, and then press it.
If you want to print all the photos, press [Print All] , and then press the [Yes] button to confirm.
5
Enter the number of copies in one of the following ways: • Press [-] or [+] on the Touchscreen.
• Press to display the keyboard on the Touchscreen, and then enter the number of copies using the Touchscreen keyboard.
Press [OK] .
6
Press [OK] .
7
Repeat the last three steps until you have selected all the photos you want to print.
8
Press [OK] .
9
Read and confirm the displayed list of options.
10
To change the print settings, press [Print Settings] .
11
Press [Start] .
PhotoCapture Center print settings overview
The Print Settings you change are temporary for your current printout. The machine returns to its default settings after printing is complete.
You can save the print settings you use most often by setting them as the default.
For more information, see the
Online User's Guide
.
25
7
Fax
Before Faxing Set Your Station ID
Set the machine's Station ID if you want the date and time to appear on each fax you send.
1
Press [Settings] > [All Settings] > [Initial Setup] > [Station ID] .
2
Press [Fax] .
3
Enter your fax number (up to 20 digits) on the Touchscreen, and then press [OK] .
4
Press [Name] .
5
Enter your name (up to 20 characters) using the Touchscreen, and then press [OK] .
• Press to cycle between letters, numbers and special symbols.
(The available characters may differ depending on your country.) • If you entered an incorrect character and want to change it, press d or c to move the cursor to it. Press and then enter the correct character.
• To enter a space, press [Space] .
6
Press .
NOTE
(USA only) The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or electronic device to send any message via a telephone fax machine unless such messages clearly contain, in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machines or such business, other entity or individual.
Telephone Line Interference/ VoIP
If you are having problems sending or receiving a fax due to possible interference on the telephone line or if you are using a VoIP system, we recommend changing the modem speed to minimize errors in fax operations.
1 2
Press [Settings] > [All Settings] > [Initial Setup] > [Compatibility] .
Press [Normal] or [Basic(for VoIP)] .
• [Basic(for VoIP)] reduces the modem speed to 9,600 bps and turns off color fax receiving and ECM, except for color fax-sending. Unless interference is a recurring problem on your telephone line, you may prefer to use it only when needed.
To improve compatibility with most VoIP services, Brother recommends changing the compatibility setting to [Basic(for VoIP)] .
26
• [Normal] sets the modem speed at 14,400 bps.
3
Press .
• VoIP (Voice over IP) is a type of phone system that uses an Internet connection, rather than a traditional phone line.
Related Information
• Error and Maintenance Messages on page 44
• Fax and Telephone Problems on page 54
Receive Modes
Some receive modes answer automatically ( [Fax Only] these modes.
and [Fax/Tel] ). You may want to change the Ring Delay before using
Fax Only
[Fax Only] mode automatically will answer every call as a fax.
Fax/Tel
[Fax/Tel] mode helps you manage incoming calls, by recognizing whether they are fax or voice calls and handling them in one of the following ways: • Faxes will be received automatically.
• Voice calls will start the F/T ring to tell you to pick up the line. The F/T ring is a pseudo/double-ring made by your machine.
Manual
[Manual] mode turns off all automatic answering functions (unless you are using Distinctive Ring feature).
To receive a fax in [Manual] mode, lift the handset of the external telephone or press the Hook button. When you hear fax tones (short repeating beeps), press the Start button, and then select [Receive] to receive a fax. You can also use the Easy Receive feature to receive faxes by lifting a handset on the same line as the machine.
External TAD
[External TAD] calls.
mode lets an external answering device manage your incoming Incoming calls will be handled in the following ways: • Faxes will be received automatically.
• Voice callers can record a message on the external TAD.
Related Information
• Fax and Telephone Problems on page 54
27
Choose the Correct Receive Mode
The correct Receive Mode for you is determined by the external devices and telephone subscriber services (Voice Mail, Distinctive Ring and so on) you will be using on the same line as the Brother machine.
Will you be using a Distinctive Ring number for receiving faxes? (USA and Canada only)
Brother uses the term "Distinctive Ring" but different telephone companies may have other names for this service, such as Custom Ringing, RingMaster, Personalized Ring, Teen Ring, Ident-A-Ring, Ident-A Call, Data Ident-A-Call, Smart Ring and SimpleBiz Fax & Alternate Number Ringing.
Will you be using Voice Mail on the same telephone line as your Brother machine?
If you have Voice Mail on the same telephone line as your Brother machine, there is a strong possibility that Voice Mail and the Brother machine will conflict with each other when receiving incoming calls.
Select Manual Mode as your Receive Mode.
If you do not want to answer every call manually to determine whether it's a voice call or a fax, contact your telephone provider and ask about Distinctive Ring services.
Will you be using a Telephone Answering Device on the same telephone line as your Brother machine?
Your external telephone answering device (TAD) will answer every call automatically.
Voice messages are stored on the external TAD and fax messages are printed. Select [External TAD] as your Receive Mode.
Will you be using your Brother machine on a dedicated fax line?
Your machine automatically answers every call as a fax. Select [Fax Only] as your Receive Mode.
Will you be using your Brother machine on the same line as your telephone?
•
Do you want to receive voice calls and faxes automatically?
Select [Fax/Tel] mode when your Brother machine and your telephones share the same line.
Important Note:
[Fax/Tel] You cannot receive voice messages on either Voice Mail or an answering machine if you select mode.
•
Do you expect to receive very few faxes?
Select [Manual] as your Receive Mode. You control the telephone line and must answer every call yourself.
1
Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Receive Mode] .
If you cannot change the [Receive Mode] option, make sure the Distinctive Ring feature is set to [Off] .
2
Press a or b to display the [Fax Only] , [Fax/Tel] , [External TAD] , or [Manual] option, and then press the option you want.
3
Press .
Related Information
• Fax and Telephone Problems on page 54
• Troubleshooting for Other Fax Problems on page 55
28
Set the F/T Ring Time (Pseudo/Double-ring)
When you set the Receive Mode to [Fax/ Tel] line.
, if the call is a fax, your machine will receive it automatically. However, if it is a voice call, the machine will sound the F/T ring (pseudo/double-ring) for the time you set in the F/T Ring Time option. When you hear the F/T ring, it means that a voice caller is on the Because the F/T ring is a setting only on your Brother machine, extension and external telephones will not ring; however, you can still answer the machine's call on any telephone.
1
Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [F/T Ring Time] .
2
Press how long the machine will double ring to alert you to a voice call ( [20Secs] , [30Secs] , [40Secs] , or [70Secs] ).
3
Press .
Even if the caller hangs up during the pseudo/double-ringing, the machine will continue to ring for the set time.
Set the Number of Rings Before the Machine Answers (Ring Delay)
When somebody calls your machine, you will hear the normal telephone ring sound. The number of rings is set in the Ring Delay option.
• The Ring Delay setting sets the number of times the machine rings before it answers in [Fax Only] and [Fax/ Tel] modes.
• If you have external or extension telephones on the same line as the machine, keep the Ring Delay setting of [4] .
1
Press [Settings] > [All Settings] > [Fax] > [Setup Receive] > [Ring Delay] .
2
Press the number of times you want the line to ring before the machine answers (0, 1, 2, 3, or 4).
• If you select countries).
[0] , the machine will answer immediately and the line will not ring at all (available only for some
3
Press .
29
Store Numbers
You can set up your machine to store fax numbers in the Address Book.
If you lose electrical power, the Address Book numbers that are in the machine's memory will not be lost.
Store Address Book Numbers
You can store up to 100 Addresses with a name, and each name can have two numbers.
1
Press [Fax] > [Address Book] .
2
Do the following steps: a. Press [Edit] > [Add New Address] > [Name] .
b. Enter the name (up to 16 characters) using the Touchscreen. Press [OK] .
c. Press [Address 1] .
d. Enter the first fax or telephone number (up to 20 digits) using the Touchscreen. Press [OK] .
• Press [Pause] [Pause] to insert a pause between numbers. You can press as many times as needed to increase the length of the pause.
e. To store the second fax or telephone number, press [Address 2] (up to 20 digits) using the Touchscreen. Press [OK] .
. Enter the second fax or telephone number f. Press [OK] to confirm.
To store another Address Book number, repeat these steps.
3
Press .
Change or Delete Address Book Names or Numbers
You can change or delete an Address Book name or number that has already been stored.
1
Press > [Edit] .
[Fax] > [Address Book]
2
Press a or b to display [Change] , and then press it.
To delete numbers, press a or b to display [Delete] press [OK] , and then press it. Select the numbers you want to delete by pressing them to display a red check mark, then .
Press [Yes] to confirm.
3
Press a or b to display the number you want to change, and then press it.
4
Do one of the following: • To change the name, press [Name] .
Enter the new name (up to 16 characters) using the Touchscreen.
Press [OK] .
• To change the first fax or telephone number, press [Address 1] .
Enter the new fax or telephone number (up to 20 digits) using the Touchscreen.
Press [OK] .
• To change the second fax or telephone number, press [Address 2] .
Enter the new fax or telephone number (up to 20 digits) using the Touchscreen.
Press [OK] .
30
How to change the stored name or number: To change a character, press d or c to position the cursor to highlight the character you want to change, and then press . Enter the new character.
5
Press [OK] to finish.
6
Press .
31
Telephone Services and External Devices
You may be able to use the following services and connections with your Brother machine.
These are summaries of ways to connect your machine. For more information about each topic, see the
Online User's Guide
.
Voice Mail
If you have Voice Mail service and your Brother machine on the same line, they will conflict with one another when receiving incoming calls. If you want the Brother machine to share a single line with your Voice Mail, you must either put the Brother machine's in Manual Mode or subscribe to your telephone company’s Distinctive Ring service.
Distinctive Ring
Distinctive Ring is a telephone-company service that allows you to have two different phone numbers on a single line. Each telephone number has its own ring pattern.
You can program your Brother machine to receive faxes automatically on one of the two numbers.
Voice Over Internet Protocol (VoIP)
VoIP is a phone system that uses an Internet connection instead of a traditional telephone line. Telephone providers frequently bundle VoIP with Internet and cable services. Your Brother machine may not work with some VoIP systems. For more information, contact your VoIP provider.
Connection of an External Telephone Answering Device (TAD)
Your Brother machine can receive faxes automatically when it shares a line with an external TAD. You must connect the TAD to the jack labeled EXT. on the Brother machine and set the machine's Receive Mode to External TAD.
External and Extension Telephones
You can connect a separate telephone to the jack labeled EXT. on the Brother machine. If you answer an incoming fax on the external telephone, you can make the machine receive it by pressing pressing
* 5 1
.
* 5 1
, or by pressing Fax Start, and then choosing Receive. If you answer an incoming fax on an extension telephone that shares the line with the Brother machine, you can transfer the fax to the machine by If the machine answers a voice call and pseudo/double-rings for you to take over, press
# 5 1
to take the call on an extension telephone.
32
Fax Using Your Machine Send a Fax
1
Load your document in the ADF or on the scanner glass.
2
Press [Fax] .
3
(MFC-J880DW/MFC-J885DW) If [Fax Preview] is set to [On] , press [Fax] > [Sending Faxes] .
The Touchscreen displays: Enter the fax number in one of the following ways: • Dial Pad (Enter the fax number manually.) Press all digits of the number using the Touchscreen.
• [Redial] (Redial the last number you dialed.) • Press [Call History] > [Redial] .
[Outgoing Call] history.) (Select a number from the Outgoing Call Press [Call History] > [Outgoing Call] .
Choose the number you want, and then press [Apply] .
• [Caller ID history] (Select a number from the Caller ID history.) • Press [Call History] > [Caller ID history] .
Choose the number you want, and then press [Apply] .
[Address Book] (Select a number from the Address Book.) Press [Address Book] .
Do one of the following: • Choose the number you want, and then press [Apply] .
• Press , and then enter the first letter of the name and press [OK] . Press the name you want to dial. If the name has two numbers, press the number you want. Press [Apply] .
4
If you want to change the fax settings, press [Options] .
5
Press a or b to display the setting you want to change, and then press it.
6
Press the option you want.
7
When finished, press [OK] .
8
Press [Fax Start] .
33
9
Do one of the following: • If you are using the ADF, the machine starts scanning and sending the document.
• If you are using the scanner glass and selecting [Black] in the [Color Setting] , the machine starts scanning the first page.
Go to the next step.
• If you are using the scanner glass and selecting [Color] in the [Color Setting] a color fax.
, the Touchscreen asks if you want to send Press [Yes (Color fax)] and sending the document.
to confirm. The machine starts dialing
10
When the Touchscreen displays [Next Page?] , do one of the following: • Press [No] when finished scanning pages.The machine starts sending the document.
• Press [Yes] to scan another page.
Place the next page on the scanner glass, and then press [OK] . The machine starts scanning the page.
Repeat this step for each additional page.
Set Fax Preview to On
Related Models:
MFC-J880DW/MFC-J885DW Use the Fax Preview feature to view received faxes on the LCD.
• This feature is available only for black and white faxes.
• When Fax Preview is turned on, a backup copy of received faxes will not be printed for Fax Forwarding, PC-Fax Receiving and Forward to Cloud operations, even if you set Backup Print to [On] .
• Although printed faxes show the received date and time when Fax Receive Stamp is turned on, the Fax Preview screen will not display the received date and time.
1
Press
2
Press [Settings] .
[Fax Preview] .
3
Press [On] (or [Off] ).
4
Press [Yes] .
The Touchscreen displays a message saying future received faxes will not be printed.
5
Press [Yes] .
6
Press .
If faxes are stored in the memory when you change Fax Preview to Off, do one of the following: • If you do not want to print the stored faxes, press [Continue] .
Press [Yes] to confirm.
Your faxes will be deleted.
• To print all the stored faxes, press [Print All Faxes Before Delete] .
• If you do not want to turn off Fax Preview, press [Cancel] .
34
Preview New Faxes
Related Models:
MFC-J880DW/MFC-J885DW When a fax is received, a message appears on the LCD.
• This feature is available only for black and white faxes.
• To see a fax you already previewed, press [Fax] and [Received Faxes] .
1
Press [View] .
2
The fax list includes old and new faxes.
A blue mark appears next to new faxes.
Press the fax you want.
If you want to print or delete all the faxes in the list, press [Print/Delete] .
Do one of the following: • Press [Print All(New Faxes)] to print all faxes you have not yet viewed.
• Press [Print All(Old Faxes)] to print all faxes you have viewed.
• Press [Delete All(New Faxes)] to delete all faxes you have not yet viewed.
• Press [Delete All(Old Faxes)] to delete all faxes you have viewed.
3
Perform the following operations by pressing the buttons shown in the table:
Button Result
Enlarge the fax.
Reduce the fax.
a or b d or c Scroll vertically.
Scroll horizontally.
Rotate the fax clockwise.
Delete the fax.
Press Yes to confirm.
Go back to the previous page.
Go to the next page.
Go back to the fax list.
Start Print the fax.
If the fax is a single page, it starts printing. A Touchscreen message asks if you want to delete the fax from the machine's memory.
To delete the fax, press Yes .
To keep the fax in the machine's memory, press No .
35
Button Result
If the fax has multiple pages, do one of the following: • Press Print All Pages to print the whole message. A Touchscreen message asks if you want to delete the fax from the machine's memory. To delete the fax, press Yes .
To keep the fax in the machine's memory, press No .
• Press Print Displayed Only to print only the displayed page.
• Press Print From Displayed last page.
to print from the displayed page to the • If your fax is large there may be a delay before it is displayed.
• The Touchscreen displays the current page number and total pages of the fax message. If your fax message is over 99 pages, the total number of pages appears as “XX.”
4
Press .
36
Fax Using Your Computer (PC-FAX) Send Faxes from Your Computer
The Brother PC-FAX feature lets you send a file, created in any application on your computer, as a standard fax and even attach a cover page.
For Windows ® : For more information, see the
Online User's Guide
:
PC-FAX for Windows ®
.
For Macintosh: For more information, see the
Online User's Guide
:
PC-FAX for Macintosh
.
Receive Faxes on Your Computer (Windows
®
only)
Use Brother's PC-FAX software to receive faxes on your computer, screen them, and print only those faxes you want.
1 2 3 4
From your application select
File
, and then
.
(The steps may vary depending on your application.) The Print dialog box appears.
Select
Brother PC-FAX
.
Click
.
The
Brother PC-FAX
user interface appears.
Enter the recipient’s fax number.
a. Use your computer keyboard or click the
Brother PC-FAX
user interface's numeric keypad.
b. Click
Add Send Address
.
You can also select a stored number from the
Address Book
.
• Even if you turn off your computer (at night or on the weekend, for example), your machine will receive and store your faxes in its memory. The number of received faxes that are stored in the memory appears on the LCD.
• When you start your computer and the PC-Fax Receive software runs, your MFC transfers your faxes to your computer automatically.
• For PC-Fax Receive to work, the PC FAX Receive software must be running on your computer.
• Before you can set up PC-Fax Receive, you must install the MFL-Pro Suite software on your computer. Make sure your Brother machine is connected to your computer and turned on.
• If your machine displays an error and is unable to print faxes from memory, use PC-FAX to transfer your faxes to a computer.
•
PC-Fax Receive is not available for Macintosh
.
5
Click
Start
.
Your document is sent to the Brother machine and then faxed to the recipient.
Contact the application's vendor if you need more support.
37
1
Do one of the following: • (Windows ® XP, Windows Vista ® and Windows ® 7) Click
Start
>
All Programs
>
Brother
>
Brother Utilities
>
PC FAX
>
Receive
.
• (Windows ® 8) Click (
Brother Utilities
), and then click the drop-down list and select your model name (if not already selected).
Click
PC-FAX
in the left navigation bar, and then click
Receive
.
2
Confirm the message and click
Yes
.
The
PC-FAX Receive
window appears.
The (
PC-FAX Receive
) icon also appears in your computer task tray.
38
A
Routine Maintenance
Clean the Scanner
1
Unplug the machine from the AC power outlet.
2
Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with a non-flammable glass cleaner.
1 3
Check the Print Quality
If faded or streaked colors and text appear or if text is missing on your printouts, the print head nozzles may be clogged. Print the Print Quality Check Sheet and look at the nozzle check pattern.
1
Press [Ink] > [Improve Print Quality] > [Check Print Quality] .
2
3
In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-flammable glass cleaner. (ADF models only) 1 You can also press [Settings] > [Maintenance] > [Improve Print Quality] > [Check Print Quality] .
2
Press [Start] .
The machine prints the Print Quality Check Sheet.
3
Check the quality of the four color blocks on the sheet.
4
The Touchscreen asks about the print quality. Do one of the following: • If all lines are clear and visible, press [No] , and then press the Print Quality check.
to finish • If lines are missing (see
Poor
, below), press [Yes] .
OK
2
Related Information
• Troubleshooting for Other Fax Problems on page 55
• Troubleshooting for Other Print Problems on page 59
39
Poor
When a print head nozzle is clogged, the printed sample looks like this.
5
The Touchscreen asks you to check the print quality of each color. Press the number of the pattern (1–4) that most closely matches the printing result.
6
Do one of the following: • If print head cleaning is needed, press [Start] to start the cleaning procedure.
• If print head cleaning is not needed, the Maintenance screen reappears on the LCD. Press .
7
After the cleaning procedure is finished, the Touchscreen asks if you want to print the Print Quality Check Sheet again. Press [Yes] , and then press [Start] .
The machine prints the Print Quality Check Sheet again. Check the quality of the four color blocks on the sheet again.
If you clean the print head and the print has not improved, try installing a new Genuine Brother Brand replacement ink cartridge for each problem color. Try cleaning the print head again. If the print has not improved, contact Brother Customer Service.
IMPORTANT
DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
After the print head nozzle is cleaned, the horizontal lines are gone.
Related Information
• Troubleshooting for Other Print Problems on page 59
40
Check the Print Alignment from Your Brother Machine
If your printed text becomes blurred or images become faded after transporting the machine, adjust the print alignment.
When the print alignment is not adjusted correctly, text looks blurry or crooked, like this.
After the print alignment is adjusted correctly, text looks like this.
1
Press [Ink] > [Improve Print Quality] > [Alignment] .
You can also press [Settings] > [Maintenance] > [Improve Print Quality] > [Alignment] .
2
Press [Next] , and then press [Start] .
The machine starts printing the Alignment Check Sheet.
(A)
4
Press .
Related Information
• Troubleshooting for Other Print Problems on page 59
3
For the (A) pattern, press [OK] .
a or b to display the number of the test print with the fewest visible vertical stripes (1-9), and then press it (in the example above, row number 6 is the best choice). Press Repeat this step for the rest of the patterns.
41
B
Troubleshooting
Use this section to resolve problems you may encounter when using your Brother machine.
Identify the Problem
Even if there seems to be a problem with your machine, you can correct most problems yourself.
First, check the following: • The machine's power cord is connected correctly and the machine's power is on.
• All of the machine's orange protective parts have been removed.
• The ink cartridges are installed correctly.
• The Scanner Cover and the Jam Clear Cover are fully closed.
• Paper is inserted correctly in the paper tray.
• The interface cables are securely connected to the machine and the computer, or the wireless connection is set up on both the machine and your computer.
• (For network models) The access point (for wireless), router, or hub is turned on and its link button is blinking.
• Check the LCD or the machine's status in
Status Monitor
on your computer.
Find the Error
Using the Status Monitor
Find the Solution
• A green icon indicates the normal stand-by condition.
• A yellow icon indicates a warning.
• A red icon indicates an error has occurred.
• A gray icon indicates the machine is offline.
• Double-click the icon in the task tray.
• (Windows ® ) If you check
Load Status Monitor on Startup
computer.
, the Status Monitor will launch automatically each time you start your • Click the
Troubleshooting
button to access Brother's troubleshooting website.
42
Find the Error
Using the LCD
Find the Solution
1. Follow the messages on the LCD.
2. See the instructions in the following Error and Maintenance Messages table.
3. If you cannot resolve the error, please refer to the
Online User's Guide
:
Error and Maintenance Messages
or see FAQs on the Brother Solutions Center at http://support.brother.com
43
Error and Maintenance Messages
The most common error and maintenance messages are shown in the table. To see more detailed information, read the
Online User's Guide
.
You can correct most errors and perform routine maintenance yourself. If you need more tips, go to your model's
FAQs & Troubleshooting
page on the Brother Solutions Center at http:// support.brother.com.
(MFC-J880DW/MFC-J885DW) If the Touchscreen displays errors and your Android message and data rates may apply.) ™ device supports the NFC feature, touch your device to the NFC logo on the control panel to access the Brother Solutions Center and browse the latest FAQs from your device. (Your mobile telephone provider's Make sure the NFC settings of both your Brother machine and your Android ™ device are set to On.
Error Message
B&W 1-sided Print Only Replace ink.
Cannot Detect
Action
One or more of the color ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more information, see the
Online User's Guide
:
Replace the Ink Cartridges
.
The machine will stop all print operations and you will not be able to use the machine until you change to a new ink cartridge in the following cases: • If you unplug the machine or take out the ink cartridge.
• (Windows ® ) If you select
Slow Drying Paper
in the
Basic
tab of the printer driver.
(Macintosh) If you select
Slow Drying Paper
in the
Print Settings
drop-down list of the printer driver.
Take out the new ink cartridge and reinstall it slowly and firmly until it latches.
For more information, see the
Online User's Guide
:
Replace the Ink Cartridges
.
Remove the used ink cartridge and install a new one.
Use a new Genuine Brother Innobella Ink Cartridge. If the error is not cleared, call Brother Customer Service.
Slowly turn the ink cartridge so that the ink supply port is pointing downward, and then reinstall the cartridge.
Check the model numbers of the ink cartridges and install the correct ink cartridges.
See
Related Information
:
Supply Specifications
at the end of this section.
44
Error Message
Cannot Detect Ink Volume Cannot Print Replace ink.
Connection Failed
Action
Use a new Genuine Brother Innobella Ink Cartridge. If the error is not cleared, call Brother Customer Service.
One or more of the ink cartridges have reached the end of their lives.
Replace the ink cartridges.
For more information, see the
Online User's Guide
:
Replace the Ink Cartridges
.
•
You can still scan even if the ink is low or needs to be replaced.
You tried to poll a fax machine that is not in Polled Waiting mode.
Check the other fax machine's polling setup.
Data Remaining in Memory Disconnected Document Jam/too Long DR Mode in Use High Temperature Hub is Unusable.
Image Too Long (MFC-J880DW/ MFC-J885DW) Image Too Small (MFC-J880DW/ MFC-J885DW) Press . The machine will cancel the job and clear it from the memory. Try to print again.
Try to send or receive again.
If calls are stopped repeatedly and you are using a VoIP (Voice over IP) system, try changing the Compatibility to Basic (for VoIP).
See
Related Information
:
Telephone Line Interference/VoIP
at the end of this section.
The document was not inserted or fed correctly, or the document scanned from the ADF was too long.
See
Related Information
:
Document Jams
at the end of this section.
The machine is in Distinctive Ring mode. You cannot change the Receive Mode from Manual to another mode.
Set Distinctive Ring to Off.
For more information, see the
Online User's Guide
:
Turn off Distinctive Ring
.
After cooling the room, allow the machine to cool down to room temperature. Try again when the machine has cooled down.
Hubs, including a USB flash drive with a built in hub, are not supported. Unplug the device from the USB direct interface.
The proportions of your photo are irregular so effects could not be added.
Choose a regularly proportioned image.
The size of your photo is too small to trim.
Choose a larger image.
45
Error Message
Ink Absorber Pad Full Ink Absorber Pad NearFull Ink Low Jam A Inside/ Front Repeat Jam A Inside/Front Jam B Front Repeat Jam B Front
Action
The ink absorber box or flushing box must be replaced. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced.
Reasons for cleaning are: 1. The machine automatically cleans itself after you remove the power cord and plug it back in.
2. After a paper jam has been cleared, the machine automatically cleans itself before the next received page is printed.
3. The machine automatically cleans itself after sitting idle for more than 30 days (infrequent use).
4. The machine automatically cleans itself after ink cartridges of the same color have been replaced 12 times.
The ink absorber box or flushing box must be replaced soon. Call Brother Customer Service or a Brother Authorized Service Center to have your machine serviced.
One or more of the ink cartridges are near the end of their lives.
Order a new ink cartridge. You can continue printing until the Touchscreen displays Cannot Print .
For more information, see the
Online User's Guide
:
Replace the Ink Cartridges
.
•
You can still scan even if the ink is low or needs to be replaced.
Remove the jammed paper.
See
Related Information
:
Printer Jam or Paper Jam
at the end of this section.
Make sure the paper length guide is set to the correct paper size.
DO NOT extend the paper tray when you load A5 or smaller size paper.
Do not put more than one sheet of paper in the manual feed slot at any one time. Wait until the Touchscreen displays Where to Place the Paper before you feed the next sheet of paper in the manual feed slot.
Remove the jammed paper.
See
Related Information
:
Printer Jam or Paper Jam
at the end of this section.
Make sure the paper length guide is set to the correct paper size.
DO NOT extend the paper tray when you load A5 or smaller size paper.
46
Error Message
Jam C Rear Low Temperature Media card error Media Error Media is Full.
No Caller ID No Ink Cartridge
Action
Remove the jammed paper.
See
Related Information
:
Printer Jam or Paper Jam
at the end of this section.
Make sure the paper length guide is set to the correct paper size.
DO NOT extend the paper tray when you load A5 or smaller size paper.
Clean the paper pick-up rollers.
For more information, see the
Online User's Guide
:
Clean the Paper Pick-up Rollers
.
After warming the room, allow the machine to warm up to room temperature. Try again when the machine has warmed up.
Multiple data storage devices were in the machine when it was turned on.
Remove the memory card(s) or USB flash drive that you are not using.
Remove the memory card from the media drive (slot) of the machine and format it correctly.
Put the card firmly into the slot again to make sure it is in the correct position. If the error remains, check the media drive (slot) of the machine by putting in another memory card that you know is working.
Your machine can only save to your memory card or USB flash drive if it contains fewer than 999 files. Delete unused files and try again.
Delete unused files from your memory card or USB flash drive to make some free space, and then try again.
There is no incoming call history. You did not receive calls or you have not subscribed to the Caller ID service from your telephone company.
If you want to use the Caller ID feature, call your telephone company.
For more information, see the
Online User's Guide
:
Caller ID
.
Take out the new ink cartridge and re-install it slowly and firmly until it latches.
For more information, see the
Online User's Guide
:
Replace the Ink Cartridges
.
47
Error Message
No Paper Fed Out of Fax Memory Out of Memory
Action
Do one of the following: • Refill the paper tray, and then follow the on-screen instructions.
• Remove and reload the paper, and then follow the on-screen instructions.
The photo bypass tray is in the wrong position.
Return the photo bypass tray to the Normal printing position when you use cut sheet paper.
The paper was not inserted in the center position of the manual feed slot.
Remove the paper and reinsert it in the center of the manual feed slot, and then follow the on-screen instructions.
See
Related Information
:
Load Paper in the Manual Feed Slot
at the end of this section.
The Jam Clear Cover is not closed correctly.
Do one of the following: • Clear the data from the memory. To gain extra memory, you can turn off Memory Receive.
For more information, see the
Online User's Guide
:
Turn Off Memory Receive
.
• Print the faxes that are in the memory.
For more information, see the
Online User's Guide
:
Print a Fax Stored in the Machine's Memory
.
If a fax-sending or copy operation is in progress:
• Press or Quit or Close and wait until the other operations that are in progress finish, and then try again.
• Press Send Now to send the pages scanned so far.
• Press Partial Print to copy the pages scanned so far.
• Clear the data in the memory. To gain extra memory, you can turn off Memory Receive.
For more information, see the
Online User's Guide
:
Turn Off Memory Receive
.
• Print the faxes that are in the memory.
For more information, see the
Online User's Guide
:
Print a Fax Stored in the Machine's Memory
.
48
Error Message
Paper Size Mismatch Paper Tray not detected Repetitive No Paper Fed Touchscreen Init.
Failed Tray removed
Action
1. Check that the paper size you chose on the machine's display matches the size of the paper in the tray.
See
Related Information
:
Change the Paper Size and Paper Type
at the end of this section.
2. Make sure you loaded the paper in a Portrait position, by setting the paper guides at the indicators for your paper size.
3. After you have checked the paper size and the paper position, follow the on-screen instructions.
If you are printing from your computer, make sure the paper size you chose in the printer driver matches the size of paper in the tray.
For more information, see the
Online User's Guide
:
Print Settings (Windows ® )
or
Print Options (Macintosh)
.
Slowly push the paper tray completely into the machine.
Paper or a foreign object has prevented the paper tray from being inserted properly.
Pull the paper tray out of the machine, and remove the jammed paper or foreign object. If you cannot find or remove the jammed paper, see
Related Information
:
Printer Jam or Paper Jam
at the end of this section.
Clean the paper pick-up rollers.
For more information, see the
Online User's Guide
:
Clean the Paper Pick-up Rollers
.
The Touchscreen was pressed before the power on initialization was completed.
Make sure nothing is touching or resting on the Touchscreen, especially when plugging the machine in.
Debris may be stuck between the lower part of the Touchscreen and its frame.
Insert a piece of stiff paper between the lower part of the Touchscreen and its frame and slide it back and forth to push out the debris.
This message is displayed when the setting to confirm the paper type and size is enabled.
To not display this confirmation message, change the setting to Off.
See
Related Information
:
Change the Check Paper Size Setting
at the end of this section.
49
Error Message
Unable to Clean XX Unable to Initialize XX Unable to Print XX Unable to Scan XX
Action
A foreign object, such as a paper clip or a piece of ripped paper, is in the machine.
Open the scanner cover and remove any foreign objects and paper scraps from inside the machine.
If the error message continues, transfer your faxes to another fax machine or your computer before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and reconnect it.
(MFC-J880DW/MFC-J885DW: The machine can be turned off without losing faxes stored in the memory. ) For more information, see the
Online User's Guide
:
Transfer Your Faxes or Fax Journal Report
.
Transfer your faxes to another fax machine or your computer before disconnecting the machine so you will not lose any important messages. Then, disconnect the machine from the power for several minutes and reconnect it.
(MFC-J880DW/MFC-J885DW: The machine can be turned off without losing faxes stored in the memory. ) For more information, see the
Online User's Guide
:
Transfer Your Faxes or Fax Journal Report
.
A broken device is connected to the USB direct interface.
Unusable Device Disconnect device from front connector & turn machine off & then on Unusable Device Please disconnect USB device.
Wrong Ink Cartridge Wrong Ink Color Unplug the device from the USB direct interface, then press turn the machine off and then on again.
A USB device or USB flash drive that is not supported has been connected to the USB direct interface.
to Unplug the device from the USB direct interface. Turn the machine off and then on again.
The ink cartridge model number is not compatible with your machine.
Verify the cartridge model number will work with your machine.
See
Related Information
:
Supply Specifications
at the end of this section.
Check which ink cartridges are not matched by color to their ink cartridge positions and move them to their correct positions.
50
Related Information
• Load Paper in the Manual Feed Slot on page 10
• Change the Check Paper Size Setting on page 13 • Change the Paper Size and Paper Type on page 13
• Telephone Line Interference/VoIP on page 26
• Printer Jam or Paper Jam on page 61
• Supply Specifications on page 69
Transfer Your Faxes or Fax Journal Report
If the LCD shows: • [Unable to Clean XX] • [Unable to Initialize XX] • [Unable to Print XX] • [Unable to Scan XX] We recommend transferring your faxes to another fax machine or to your computer.
You can also transfer the Fax Journal report to see if there are any faxes you must transfer.
For more information, see the
Online User's Guide
:
Transfer Your Faxes or Fax Journal Report
.
51
Troubleshooting for Wireless LAN setup Wireless LAN Report Error Codes
If the Wireless LAN Report shows that the connection failed, check the error code on the printed report and see the corresponding instructions in the table:
Error Code
TS-01 TS-02 TS-04
Problem and Recommended Solutions
The wireless setting is not activated, change the wireless setting to ON.
If a network cable is connected to your machine, disconnect it and change the wireless setting of your machine to ON.
The wireless access point/router cannot be detected.
1. Check the following two points: • Unplug the power to your wireless access point/router, wait for 10 seconds, and then plug it back in.
• If your WLAN access point/router is using MAC address filtering, confirm that the MAC address of the Brother machine is allowed in the filter.
2. If you manually entered the SSID and security information (SSID/ authentication method/encryption method/Network Key), the information may be incorrect.
Reconfirm the SSID and security information and re-enter the correct information if needed.
The Authentication/Encryption methods used by the selected wireless access point/router are not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the wireless access point/router. Your machine supports the following authentication methods: • WPA-Personal TKIP or AES • WPA2-Personal AES • Open WEP or None (without encryption) • Shared key WEP If your problem is not solved, the SSID or network settings you entered may be incorrect. Confirm the wireless network settings.
For Ad-Hoc Mode, change the authentication and encryption methods of your computer for the wireless setting. Your machine supports Open authentication only, with optional WEP encryption.
52
Error Code
TS-05 TS-06 TS-07 TS-08
Problem and Recommended Solutions
The security information (SSID/Network Key) is incorrect.
Confirm the SSID and Network Key. If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.
The wireless security information (Authentication method/Encryption method/ Network Key) is incorrect.
Confirm the wireless security information (Authentication method/Encryption method/Network Key) listed in TS-04. If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only.
The machine cannot detect a wireless access point/router that has WPS or AOSS ™ enabled.
If you would like to configure your wireless settings using WPS or AOSS ™ , you must operate both your machine and the wireless access point/router.
Confirm that your wireless access point/router supports WPS or AOSS ™ and try starting again.
If you do not know how to operate your wireless access point/router using WPS or AOSS ™ , see the documentation provided with your wireless access point/router, ask the manufacturer of your wireless access point/router, or ask your network administrator.
Two or more wireless access points that have WPS or AOSS ™ enabled are detected.
• Confirm that only one wireless access point/router within range has the WPS or AOSS ™ method active and try again.
• Try starting again after a few minutes to avoid interference from other access points.
53
Fax and Telephone Problems
If you cannot send or receive a fax, check the following:
1
Connect one end of the telephone line cord to the area labeled "LINE", and then connect the other end of the telephone line cord directly to a telephone wall jack.
If you can send and receive faxes when the telephone line is directly connected to the fax, the problem may be unrelated to the machine. Please contact your telephone service provider for connection issues.
2
Check the receive mode.
See
Related Information
: • •
Receive Modes Choose the Correct Receive Mode
3
Try changing the compatibility settings.
You may be able to send and receive faxes by lowering the connection speed.
For more information, see
Related Information
:
Telephone Line Interference/VoIP
.
If the problem still is not resolved, turn the machine off, and then turn it on.
Related Information
• Telephone Line Interference/VoIP on page 26
• Choose the Correct Receive Mode on page 28
54
Troubleshooting for Other Fax Problems Difficulties
Cannot send a fax.
Cannot receive a fax.
Left and right margins are cut off or a single page is printed on two pages.
Suggestions
Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack of the machine.
Make sure your machine has a dial tone by pressing the Hook button in Fax mode. If you subscribe to DSL, VoIP, or MagicJack services, call your service provider for connection instructions.
Print the Transmission Verification Report and check for an error.
Ask the other party to check that the receiving machine has paper.
Check all line cord connections. Make sure the telephone line cord is plugged into the telephone wall jack and the LINE jack of the machine.
Make sure your machine has a dial tone by pressing the Hook button in Fax mode. If you hear static or interference on your fax line, contact your local telephone provider.
If you are using a telephone answering machine (External TAD mode) on the same line as the Brother machine, make sure your answering machine is set up correctly.
1. Plug the telephone line cord directly from the telephone wall jack to your Brother machine’s LINE jack.
2. Remove the protective cap from your Brother machine’s EXT jack, and then plug the telephone line cord from your answering machine into the EXT jack.
3. Set your answering machine to answer within four rings.
If you are having problems receiving faxes or voice messages, set your answering machine to answer within two or three rings.
4. Record the outgoing message on your answering machine.
• Record five seconds of silence at the beginning of your outgoing message.
• Limit your speaking to 20 seconds.
• End your outgoing message with your Fax Receive Code for people sending manual faxes. For example: “After the beep, leave a message or press *51 and Start to send a fax.” 5. Set your answering machine to answer calls.
6. Set your Brother machine’s Receive Mode to External TAD.
See
Related Information
:
Choose the Correct Receive Mode
at the end of this section.
Make sure your Brother machine’s Easy Receive feature is turned On.
Easy Receive is a feature that allows you to receive a fax even if you answered the call on an external or extension telephone.
Turn on Auto Reduction.
55
Difficulties
Dialing does not work.
(No dial tone) Poor sending quality.
Vertical black lines when sending.
Suggestions
Check all line cord connections.
Change Tone/Pulse setting. (Available only for some countries) Try changing your resolution to Fine or S.Fine.
Make a copy to check your machine’s scanner operation. If the copy quality is not good, clean the scanner.
See
Related Information
:
Clean the Scanner
at the end of this section.
Black vertical lines on faxes you send are typically caused by dirt or correction fluid on the glass strip. Clean the glass strip.
See
Related Information
:
Clean the Scanner
at the end of this section.
Related Information
• Choose the Correct Receive Mode on page 28
• Clean the Scanner on page 39
56
Print or Scan Problems
IMPORTANT
Using non-Brother supplies may affect the print quality, hardware performance, and machine reliability.
If you cannot print or scan a document, check the following:
1
All of the machine's protective parts have been removed.
2
The interface cables are securely connected to the machine and the computer.
3
The printer or scanner driver has been installed correctly.
4
(Scan problem only) Confirm the machine is assigned with an available IP address. (Windows ® ) a. Do one of the following: (Windows ® XP, Windows Vista ® and Windows ® 7) Click
(Start)
>
All Programs
>
Brother
>
Brother Utilities
.
Click the drop-down list and select your model name (if not already selected). Click
Scan
in the left navigation bar, and then click
Scanners and Cameras
.
(Windows ® 8) Click (
Brother Utilities
), and then click the drop-down list and select your model name (if not already selected). Click
Scan
in the left navigation bar, and then click
Scanners and Cameras
.
b. Do one of the following: (Windows ® XP) Right-click a scanner device, and then select
Properties
. The Network Scanner Properties dialog box appears.
(Windows Vista ® , Windows ® 7 and Windows ® 8) Click the
Properties
button.
c. Click the
Network Setting
tab to confirm the machine's IP address.
57
Try printing with your machine. If the problem still remains, uninstall and reinstall the printer driver.
5
If the problem still remains after trying all the above, try the following: For a USB interface connection • Change the USB cable for a new one.
• Use a different USB port.
For a Wired Network connection • Change the LAN cable for a new one.
• Use a different LAN port on your hub.
• Make sure your machine's wired connection is on.
For a Wireless Network connection • Confirm your machine's Wireless status on the LCD.
Your machine has not been connected to the wireless access point. Set up the wireless network connection.
The wireless connection setting is disabled. Enable the WLAN connection and set up the wireless network connection.
The wireless access point cannot be detected. Set up the wireless network connection again.
The wireless network is connected. A three-level indicator in the LCD displays the current wireless signal strength.
You can configure wireless settings by pressing each wireless status button.
If you cannot print on both sides of paper, check the following:
6
Change the paper size setting in the printer driver to Letter.
58
Troubleshooting for Other Print Problems Difficulties
Poor print quality White horizontal lines appear in text or graphics.
The machine prints blank pages.
Characters and lines are blurred.
Printing appears dirty or ink seems to run.
Photo paper does not feed correctly.
Vertical black lines or streaks appear in copies.
Black marks or spots appear in copies.
Suggestions
Check the print quality.
See
Related Information
:
Check the Print Quality
at the end of this section.
Make sure the Media Type setting in the printer driver or the Paper Type setting in the machine’s menu matches the type of paper you are using.
For more information, see the
Online User's Guide
:
Print Settings (Windows ® )
or
Print Options (Macintosh)
.
Check the print quality.
See
Related Information
:
Check the Print Quality
at the end of this section.
Check the print quality.
See
Related Information
:
Check the Print Quality
at the end of this section.
Check the printing alignment.
See
Related Information
:
Check the Print Alignment from Your Brother Machine
at the end of this section.
If you are using photo paper, make sure the glossy side of the photo paper is face down in the tray and you have set the correct paper type.
If you are printing a photo from your computer, set the Media Type in the printer driver.
When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose.
Black vertical lines on copies are typically caused by dirt or correction fluid on the glass strip. Clean the glass strip, scanner glass, and the white bar and white plastic above them.
See
Related Information
:
Clean the Scanner
at the end of this section.
Check that the speck of dirt has been removed.
Black marks or spots on copies are typically caused by dirt or correction fluid on the scanner glass. Clean the scanner glass and white plastic above it.
See
Related Information
:
Clean the Scanner
at the end of this section.
Check that the speck of dirt has been removed.
Related Information
• Clean the Scanner on page 39 • Check the Print Quality on page 39
• Check the Print Alignment from Your Brother Machine on page 41
59
Document and Paper Jams Document Jams Document is Jammed inside the ADF Unit
Related Information
• Error and Maintenance Messages on page 44
1
Take any paper that is not jammed out of the ADF.
Document is Jammed in the Top of the ADF Unit
2
Lift the document cover.
3
Pull the jammed document out to the left.
1
Take out any paper from the ADF that is not jammed.
2
Open the ADF cover.
3
Remove the jammed document by pulling it upward.
4
Close the ADF cover.
5
Press .
IMPORTANT
To avoid future document jams, close the ADF cover correctly by pressing it down in the center.
4
Close the document cover.
5
Press .
Remove Paper Scraps Jammed in the ADF
1
Lift the document cover.
60
2
Insert a piece of stiff paper, such as cardstock, into the ADF to push any small paper scraps through.
3 4
Close the document cover.
Press .
Printer Jam or Paper Jam
Locate and remove the jammed paper.
Related Information
• Error and Maintenance Messages on page 44
Paper is Jammed Inside and in the Front of the Machine (Jam A Inside/ Front)
If the LCD displays [Jam A Inside/ Front] or [Repeat Jam A Inside/ Front] , follow these steps:
1
Unplug the machine from the AC power outlet.
IMPORTANT
(MFC-J680DW) Before you unplug the machine from the power source, you can transfer your faxes that are stored in the machine's memory to your computer or another fax machine so you will not lose any important messages.
For more information, see the
Online User's Guide
:
Transfer Your Faxes or Fax Journal Report
.
2
Pull the paper tray (1) completely out of the machine.
1
61
3
Pull the two green levers inside the machine to release the jammed paper.
6
If the LCD displays [Repeat Jam A Inside/Front] , move the print head (if needed) to take out any paper remaining in this area. Make sure scraps of paper are not left in the corners of the machine (1) and (2).
1
4
Place both hands under the plastic tabs on both sides of the machine to lift the scanner cover (1) into the open position.
1
IMPORTANT
• DO NOT touch the encoder strip, a thin strip of plastic that stretches across the width of the machine (1). Doing this may cause damage to the machine.
1 2
5
Slowly pull the jammed paper (1) out of the machine.
1 • If the print head is in the right corner as shown in the illustration (2), you cannot move the print head. Close the scanner cover, and then reconnect the power cord.
Open the scanner cover again, and then hold down until the print head moves to the center. Then unplug the machine
62
from the power source and take out the paper.
• If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper.
Hold the concave areas with the triangle marks shown in the illustration (3) to move the print head.
2
8
Slowly pull the jammed paper (1) out of the machine.
1 If the LCD displays [Repeat Jam A Inside/Front] , do the following: a. Make sure you look carefully inside (1) for any scraps of paper.
3 1 • If ink gets on your skin or clothing, immediately wash it off with soap or detergent.
7
Gently close the scanner cover using both hands.
b. Squeeze both levers (1), and then open the Jam Clear Cover at the back of the machine.
1 c. Slowly pull the jammed paper out of the machine.
63
9
d. Close the Jam Clear Cover. Make sure the cover is closed completely.
Put the paper tray firmly back in the machine.
IMPORTANT
(MFC-J680DW) Before you unplug the machine from the power source, you can transfer your faxes that are stored in the machine's memory to your computer or another fax machine so you will not lose any important messages.
For more information, see the
Online User's Guide
:
Transfer Your Faxes or Fax Journal Report
.
2
Pull the paper tray (1) completely out of the machine.
1
10
While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
3
Pull the two green levers inside the machine to release the jammed paper.
2 1
11
Reconnect the power cord.
Paper is Jammed in the Front of the Machine (Jam B Front)
If the LCD displays [Jam B Front] or [Repeat Jam B Front] , follow these steps:
1
Unplug the machine from the AC power outlet.
64
4
Slowly pull out the jammed paper (1).
d. Close the Jam Clear Cover. Make sure the cover is closed completely.
1 If the LCD displays [Repeat Jam B Front] , do the following: a. Make sure you look carefully inside (1) for any scraps of paper.
5
Put the paper tray firmly back in the machine.
1 b. Squeeze both levers (1), and then open the Jam Clear Cover at the back of the machine.
6
While holding the paper tray in the machine, pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
1 c. Slowly pull the jammed paper out of the machine.
2 1
7
Reconnect the power cord.
Paper is Jammed in the Back of the Machine (Jam C Rear)
If the LCD displays [Jam C Rear] , follow these steps:
1
Unplug the machine from the AC power outlet.
65
IMPORTANT
(MFC-J680DW) Before you unplug the machine from the power source, you can transfer your faxes that are stored in the machine's memory to your computer or another fax machine so you will not lose any important messages.
For more information, see the
Online User's Guide
:
Transfer Your Faxes or Fax Journal Report
.
2
Pull the paper tray (1) completely out of the machine.
4
Squeeze both levers (1), and then open the Jam Clear Cover at the back of the machine.
1
5
Slowly pull the jammed paper out of the machine.
1
3
Pull the two green levers inside the machine to release the jammed paper.
6
Close the Jam Clear Cover. Make sure the cover is closed completely.
7
Put the paper tray firmly back in the machine.
Depending on the paper size, it is easier to remove the jammed paper from the front of the machine rather than from the back of the machine.
8
While holding the paper tray in the machine, pull out the paper support (1)
66
until it locks into place, and then unfold the paper support flap (2).
1
9
Reconnect the power cord.
2
67
C
Appendix
Enter Text on Your Brother Machine
• The characters that are available may differ depending on your country.
• The keyboard layout may differ depending on the function you are setting.
When you need to enter text on your Brother machine, a keyboard will appear on the Touchscreen.
• Press to cycle between letters, numbers and special characters.
• Press to cycle between lowercase and uppercase letters.
• To move the cursor to the left or right, press d or c .
Inserting spaces
• To enter a space, press [Space] . Or, you can press c to move the cursor.
Making corrections
• If you entered an incorrect character and want to change it, press d or c to highlight the incorrect character. Press , and then enter the correct character.
• To insert a character, press d or c to move the cursor to the correct place, and then enter the character.
• Press characters.
for each character you want to erase, or press and hold to erase all the
68
Supply Specifications Ink Service Life of Ink Cartridge Replacement Supplies What is Innobella?
The machine uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly.
Starter ink cartridges are included in the box with your Brother machine. The first time you install the ink cartridges, the machine will use extra ink to fill the ink delivery tubes. This is a one-time process that enables high-quality printing. Replacement ink cartridges will print the number of pages specified later in this table. Starter cartridge yield is approx. 80% of the yield of the LC201 replacement cartridges.
For more information about replacement supplies, visit us at http://www.brother.com/pageyield Innobella is a range of genuine supplies offered by Brother. The name "Innobella" derives from the words "Innovation" and "Bella" (meaning "Beautiful" in Italian) and is a representation of the "innovative" technology providing you with "beautiful" and "long lasting" print results.
When you print photo images, Brother recommends Innobella glossy photo paper (BP71 series) for high quality. Brilliant prints are made easier with Innobella Ink and paper.
1 Approx. cartridge yield is declared in accordance with ISO/IEC 24711 If you are using Windows ® , double-click the Brother CreativeCenter icon on your desktop to access our
FREE
website designed as a resource to help you easily create and print customized materials for business and home use with photos, text and creativity.
Mac users can access Brother CreativeCenter at this web address: http://www.brother.com/creativecenter
Related Information
• Error and Maintenance Messages on page 44
69
D
Index
A
Accessories and Supplies..................... iii
Address Book
changing and deleting..................... 30 setting up.........................................30
ADF (automatic document feeder).18, 23
Automatic
fax receive.......................................27
B
Brother
Brother numbers.................................i
Customer Service.............................. ii
FAQs (Frequently Asked Questions)..i
product support..................................ii
service centers.................................. ii
C
Cleaning
scanner........................................... 39
Control Panel Overview......................... 1
Copy.................................................... 18
settings............................................19
D
Distinctive Ring.............................. 28, 32
Document
how to load................................18, 23
E
Entering Text........................................68
Envelope..............................................10
Error messages................................... 44
F
Fax
station ID......................................... 26 telephone line compatibility............. 26
Fax receive.......................................... 27
Fax, from computer..............................37
J
paper............................................... 61
M
Manual
receive.............................................27
Manual feed slot.................................. 10
P
Paper
check paper setting......................... 13
how to load .......................................8
Photo bypass tray................................ 10
PhotoCapture Center...........................25
Print..................................................... 15
alignment check.............................. 41
quality check................................... 39
R
Receive Mode................................ 27, 28
S
Scan.....................................................22
Supplies............................................... 69
T
TAD (Telephone Answering Device),
external..................................... 27, 32
Transferring your faxes or Fax Journal
report...............................................51
Troubleshooting
document and paper jams ..............60
error and maintenance messages ..44
70
fax and telephone problems ...........54
print or scan problems ....................57
V
Voice Mail............................................ 32
VoIP systems................................. 26, 32
W
Warranty is in the box
Notice of disclaimer ......................... iv
Wireless LAN report.............................52
71
Brother International Corporation 200 Crossing Boulevard P.O. Box 6911 Bridgewater, NJ 08807-0911 USA Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville, Dollard-des-Ormeaux, QC, Canada H9B 3H6
Visit us on the World Wide Web http://www.brother.com
These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries.
Made from 100% recycled paper (excludes cover) USA/CAN Version 0
Advertisement
Key Features
- Home & office Inkjet Colour printing
- 6000 x 1200 DPI
- Printing colours: Black, Cyan, Magenta, Yellow
- A4
- Colour copying Colour scanning Colour faxing
- Apple AirPrint, Brother iPrint & Scan, Google Cloud Print, Mopria Print Service
- Direct printing
- USB port Wi-Fi
- Internal memory: 128 MB
- 8.3 kg