Gaming Power Supply
RD
Quick User Guide
Series
Table of Contents
Introduction .......................................................... 02 Product Features .................................................. 02 Package Contents ................................................ 02 Electronic Specifications ...................................... 03 Connectors ........................................................... 04 Installation ............................................................ 04 Safety & Warning .................................................. 05 Troubleshooting .................................................... 05
Thank you for purchasing a
1
Rosewill retain it for your future reference.
Power Supply Please read the instruction manual before using and
Gaming Power Supply
RD Series
Introduction
Rosewill is the platform of choice for avid PC gamers and the Rosewill RD Power Supply series is built to the highest quality standard and delivers the ultimate performance for enthusiasts.
Product Features
• 80 PLUS Certified • Active Power Factor Correction • Safety and EMI Approval UL, FCC • 120 mm Silent Fan • Sleeved Cables • Protection: SCP, OVP, UVP, OPP
Package Contents
• RD Series Power Supply Unit x1 • AC Power Cord x1 • User Manual x 1 RD Series
2
Gaming Power Supply
RD Series
Electronic Specifications
Model No. : RD400S
Model No.
AC Input Voltage Current DC Output RD400S 100V 240V 6.3A
3.15A
Max Output Current Max Combined Wattage Total Output +3.3V
14A 100W +5V 14A +12V 30A 360W 400W -12V 0.3A
+5V SB 2.5A
3.6W
12.5W
Model No. : RD450S
Model No.
AC Input Voltage Current RD450S 100V 240V 8A 4A DC Output +3.3V
+5V Max Output Current Max Combined Wattage Total Output 14A 110W 16A +12V 34A 408W 450W -12V 0.3A
+5V SB 2.5A
3.6W
12.5W
Model No. : RD500S
Model No.
AC Input Voltage Current RD500S 100V 240V 8A 4A DC Output +3.3V
+5V Max Output Current Max Combined Wattage Total Output 14A 110W 16A +12V 38A 456W 500W -12V 0.3A
+5V SB 2.5A
3.6W
12.5W
3
Gaming Power Supply
RD Series
Connectors
RD Series
Cable RD400S RD450S RD500S 20+4 PIN Main Board Connector 1 4 PIN CPU Connector 1 1 1 1 1 8 PIN CPU Connector 1 1 1 6+2 PIN PCI-E Connector 1 1 S-ATA Connector 4 4 2 4 4 PIN Molex Connector 2 2 2 4 PIN Floppy Connector 1 1 1
Installation
If replacing an existing PSU in a system, you will first need to remove the old PSU.
Please proceed as follows:
1. Disconnect the AC power cord from your existing power supply unit.
2. Disconnect the power supply from all the components in the PC, make sure that all the connectors are unplugged. 3. Remove the four screws from the rear of the case that hold the old power supply to the chassis, and then remove the old power supply unit from case.
Installing the Power Supply:
1. Make sure the I/O switch of the PSU is at off “O” position.
2. Install the Power supply unit in the appropriated space in the PC case and secure it by screwing the four screws into the rear of the power supply.
3. Connect the 20+4 pin main power cable to the motherboard 20+4 pin socket. The detachable 4 pin section of the connector can be separated to support a 20 pin connection or section together to support a 24 pin socket.
4
Gaming Power Supply
RD Series 4. Connect the 4+4 PIN (8 PIN) power cable to the mainboard. If your mainboard supports only 4 PIN jack, connect only the right side of the connector to the mainboard.
+12V CPU power connector (EPS 8 Pin/4+4Pin) Pin1 COM COM Pin2 Right Pin3 Pin4 +12V DC +12V DC Pin1 COM COM COM COM Pin4 Pin5 +12V DC +12V DC +12V DC +12V DC Pin5 5. If you are using a graphics card with a 6 PIN/8 PIN connector please connect the respective connector to the socket on the board. the socket on board.
8. Make sure all the cables are securely seated.
position.
10.Your PSU is now connected and ready.
If your graphics card supports more than one socket, please connect the respective connector to 6. Connect the SATA or Peripheral 4 PIN Molex connectors to the hard disk or SSDs or optical drive. 7. Connect any others internal components that require power to the appropriate connector.
9. Connect the AC power cord into the back of the power supply and Switch on I/O switch at input “I”
Safety & Warning
• Due to the high voltage inside the power supply, do not attempt to remove the cover of power supply. The warranty will be void if the cover is removed. • Do not insert any objects into the open ventilation or fan grill area of the power supply.
• Do not store the power supply in high humidity and high temperature environment, • Do not plug or unplug the power cord with wet hand.
Troubleshooting
If you installed the new power supply and the system is not working properly, please check the following:
• Make sure the AC power cord is plugged correctly into PSU inlet socket and power switch is at input “I” position.
• Make sure the wall socket, extension power cord, power strip or surge protector in use, fully functional and wall power switch turned on.
• Make sure that all the connectors from power supply are correctly plugged into the mainboard.
• Make sure there are no short circuits within the systems that could result from defective hardware or misplaced connectors.
• If your are not sure, take all parts out of the housing and only leave the mainboard inside together with the power supply. Disconnect all plugs, check them and then connect them again to the respective sockets.
5
Technical Support Information
[email protected] 1-800-575-9885 --------------------------------------------------------------------------------- Thank you for purchasing a quality Rosewill product.
Please register your product at : www.rosewill.com
for complete warranty information and support for your product.
RD Series_B
