aN
К ЗЕМЛЮ
IN SOUR OWN VAS
Gaming Power Supply
(a {LH Er
Quick User Guide
RXSEWILL
Table of Contents
с
Introduction... recen nee eee 02
Product Features .........................e.eeeeee ice R KK KR 02
Package Contents .....................eeeeeeierreeeneee eee. 02
Electronic Specifications 02
CONNECTIONS cece AA 03
Installation... ees 03
Safety R Warning ................-.-eee==eíeeeeeeneeecene e. 04
Troubleshooting ..................—......eee=eeeeeereeiee ree 04
Thank you for purchasing a Rosewill Power Supply
Please read the instruction manual before using and
retain it for your future reference.
1
RY{S EW IL L Gaming Power Supply HERCULES-1600S
Introduction
Rosewill is the platform of choice for avid PC gamers and the Rosewill HERCULES Power Supply is
built to the highest quality standard and delivers the ultimate performance for enthusiasts.
Product Features
* 80 Plus Gold Certified to Deliver over 90% Efficiency
* Modular Cable Management
* Supports ATX 12V v2.3/EPS 12V v2.92 and Backwards Compatiable with ATX 12V v2.01
* Supports Crossfire and SLI
* Active Power Factor Correction (PFC) with PF value of 0.90
* Maximum Protection: Over-Voltage, Over-Current Protection, Short Circuit Protection, Under-
Voltage Protection, Over Temperature Protection, and Over Power Protection
* Long Lasting, Ultra-Quiet 135 mm Fan with Auto Speed Control
* MTBF > 100,000 Hours
Package Contents
HERCULES-1600S
e HERCULES Power Supply Unit x 1
e Modular cable set x 1
e Cable bag x 1
® User manual x 1
e AC power cord x 1
* Mounting screws x 4
Electronic Specifications
Model No. : HERCULES-1600S
AC Input
Model No. DC Output | +3.3V | +5V | +12V1|+12V2 | -12V | +5VsB
Voltage | Current
Max Output | o5a | 25A | 110A | 50a | 0.5A | 3.5A
Current
115V Max
HERCULES-1600S | \v | 18 | Combined 150W 1560W | 6.0W | 17.5W
Wattage
Total Output 1600W
RY{S EW IL L Gaming Power Supply HERCULES-1600S
Connectors
HERCULES-1600S
Cable hd
24 PIN +12V EPS 6+2 PIN S-ATA 4 PIN Molex | 4 PIN Floppy
Main Board 4+4 PIN PCI-E Connector Peripheral Connector
Connector Connector Connector Connector
Hard-Wired Modular
Q'ty
1 | 1 16 | 16 | 6 | 2
Installation
If replacing an existing PSU in a system, you will first need to remove the old PSU.
Please proceed as follows:
1. Disconnect the AC power cord from your existing power supply unit.
2. Disconnect the power supply from all the components in the PC, make sure that all the connectors
are unplugged.
3. Remove the four screws from the rear of the case that hold the old power supply to the chassis,
and then remove the old power supply unit from case.
Installing the Power Supply:
1. Make sure the 1/O switch of the PSU is at off “O” position.
2. Install the Power supply unit in the appropriated space in the PC case and secure it by screwing
the four screws into the rear of the power supply.
3. Connect the 24 pin mian power cable to the motherboard 24 pin socket.
4. Connect the 4+4 PIN (8 PIN) power cable to the mainboard. If your mainboard supports only 4 PIN
jack, connect only the right side of the connector to the mainboard.
+12V CPU power connector Right Pin Pin5
(EPS 8 Pin/4+4Pin) Pini Pin3 COM [a] a +12V DC
||
НЕ COM cam +12V DC > com |El [df] +12v DC
com | (ajaj +12\ ос =] com [a] a +12V DC
Pin2 Pind com |@ [dE +12vDC
Pin4 Pin5
Ol
. If you are using a graphics board with a 6 PIN/8 PIN connector please connect the respective
connector to the socket on the board.
If your graphics supports more than one socket, please connect the respective connector to the
socket on board.
RY{S EW IL L Gaming Power Supply HERCULES-1600S
6. Connect the SATA or Peripheral 4 PIN Molex connectors to the hard disk or SSDs or optical drive.
7. Connect any others internal components that require power to the appropriate connector.
8. Make sure all the cables are securely seated.
9. Connect the AC power cord into the back of the power supply and Switch on I/O switch at input
position.
10. Your PSU is now connected and ready.
Safety & Warning
* Due to the high voltage inside the power supply, do not attempt to remove the cover of power
supply. The warranty will be void if the cover is removed.
e Do not insert any objects into the open ventilation or fan grill area of the power supply.
e Do not store the power supply in high humidity and high temperature environment,
e Do not plug or unplug the power cord with wet hand.
Troubleshooting
If you installed the new power supply and the system is not working properly,
please check the following:
* Make sure the AC power cord is plugged correctly into PSU inlet socket and power switch is at
input “I” position.
* Make sure the wall socket, extension power cord, power strip or surge protector in use, fully
functional and wall power switch turned on.
* Make sure that all the connectors from power supply are correctly plugged into the mainboard.
* Make sure there are no short circuits within the systems that could result from defective hardware
or misplaced connectors.
* |f your are not sure take all parts out of the housing and only leave the mainboard inside together
with the power supply. Disconnect all plugs, check them and then connect them again to the
respective sockets.
RWCSEWILL
ВИ
Kesewill Technical Support Information
techsupport e rosewill.com 1-800-575-9885
Thank you for purchasing a quality Rosewill product.
Please register your product at : www.rosewill.com
for complete warranty information and support for your product.
HERCULES-1600S_B
">
