Rosewill RNX-N150UBEv3 Wi-Fi Adapter User Manual

Rosewill RNX-N150UBEv3 Wi-Fi Adapter User Manual

3

4

5

6

7

8

9

Profile name You can give a name to this profile, so you can remember its purpose easily. It can be any phrase to help you remember.

Network Name (SSID) The SSID (Service Set IDentifier, i.e. access point’s name). This field will be filled as the access point you selected when SSID is not hidden and grayed out. If SSID is hidden, you have to input correct SSID you yourself.

This is a c o m p u t e r - t o computer (ad hoc) network Channel Network Authentication Check this box if you wish to connect to another computer / network device by ad hoc method. When not accessing to wireless access point, you have to check this box.

Select wireless channel for ad hoc connection. This option only appears when you’re using ad hoc connection.

Select the network authentication type from drop-down menu. This setting must be identical with the setting of wireless access point you with to connect.

Data encryption Select the data encryption type from drop-down menu. This setting must be identical with the setting of wireless access point you with to connect.

ASCII / PASSPHRASE When the encryption type is ‘WEP’, it’s required to input a set of ‘passphrase’ to connect to wireless access point. Check ‘ASCII’ or ‘PASSPHRASE’ depends on the security setting of access point, and input it in the box; if you select ‘PASSPHRASE’ you also need to select the length of the key. The passphrase must be identical with the setting of wireless access point you with to connect.

Key index Select WEP key index. For most of access points you can select ‘1’, but please refer to the setting of the access point.

N e t w o r k k e y / Confirm network key When the encryption type is ‘WPA’ or ‘WPA2-PSK’, it’s required to input a set of ‘passphrase’ to connect to wireless access point. Please input the same passphrase in two boxes for confirmation.

EAP TYPE / Tunnel / Provision Mode When authentication type is any of 802.1X, you have to select EAP type, tunnel, and provision mode from dropdown menu. This setting must be identical with your 802.1x authentication server.

Username / Identity / Domain / Password Please input 802.1x related authentication information here.

Certificate If certification is required to authenticate with 802.1x authentication server, please select a local certificate from dropdown list.

PAC Check this box and PAC (Privilege Access Certificate) will be automatically selected.

10

11

12

13

14

15

16

17

Profile name You can give a name to this profile, so you can remember its purpose easily. It can be any phrase to help you remember.

Network Name (SSID) The SSID (Service Set IDentifier, i.e. access point’s name). This must be identical with the SSID of the access point you wish to connect.

This is a computer-to computer (ad hoc) network Channel Network Authentication Check this box if you wish to connect to another computer / network device by ad hoc method. When not accessing to wireless access point, you have to check this box.

Select wireless channel for ad hoc connection. This option only appears when you’re using ad hoc connection.

Select the network authentication type from drop-down menu. This setting must be identical with the setting of wireless access point you with to connect.

Data encryption EAP TYPE / Tunnel / Provision Mode Select the data encryption type from drop-down menu. This setting must be identical with the setting of wireless access point you with to connect.

ASCII / PASSPHRASE When the encryption type is ‘WEP’, it’s required to input a set of ‘passphrase’ to connect to wireless access point. Check ‘ASCII’ or ‘PASSPHRASE’ depends on the security setting of access point, and input it in the box; if you select ‘PASSPHRASE’ you also need to select the length of the key. Key index The passphrase must be identical with the setting of wireless access point you with to connect.

Select WEP key index. For most of access points you can select ‘1’, but please refer to the setting of the access point.

N e t w o r k k e y / Confirm network key When the encryption type is ‘WPA’ or ‘WPA2-PSK’, it’s required to input a set of ‘passphrase’ to connect to wireless access point. Please input the same passphrase in two boxes for confirmation.

When authentication type is any of 802.1X, you have to select EAP type, tunnel, and provision mode from dropdown menu. This setting must be identical with your 802.1x authentication server.

Username / Identity / Domain / Password Please input 802.1x related authentication information here.

Certificate If certification is required to authenticate with 802.1x authentication server, please select a local certificate from dropdown list.

PAC Check this box and PAC (Privilege Access Certificate) will be automatically selected.

18

19

20

21

22

Show Tray Icon Check this box to show an icon on system tray.

Radio Off Disable Adapter Windows Zero Config Uncheck this box to hide it.

Switch wireless radio off. Wireless network functionalities are disabled.

Disable wireless network adapter. All functionalities of configration menu will disappear. To resume, unckeck ‘Disable Adapter’.

Use Windows Zero Configuration to manage wireless connections. See section 2.2.2.

23

24

25

26

27

28

29

30

Network Name (SSID) Channel Please input the SSID (the name used to identify this wireless access point) here. Up to 32 numerical characters can be accepted here, excepting space.

Please select the wireless channel you wish to use, from 1 to 13.

31

Network Authentication Select network authentication mode from dropdown menu.

Data Encryption Select data encryption method from dropdown menu.

ASCII / PASSPHRASE Key Index If the encryption method is WEP, check either ‘ASCII’ or ‘PASSPHRASE’ box and input it in the box as WEP passphrase.

Select WEP key index (1-4). If you don’t know which one you should use, select 1.

Network key / Confirm network key IF network authentication mode is WPA, please input WPA passphrase in both box.

32

Beacon Interval DTIM Period Preamble Mode Set Defaults Apply Please input wireless beacon time interval here.

Please input DTIM (Delivery Traffic Indication Message) here.

Select wireless frame preamble mode (long or short) from dropdown menu.

Reset all settings back to factory default value.

Save changes.

33

34

Scenario Solution

I can’t find any wireless access point / wireless device in

‘Site Survey’ 1. 2.

Click

‘Rescan’

for few more times and see if you can find any wireless access point or wireless device. Please move closer to any known wireless access point. function.

3. 4.

Ad hoc’ function must be enabled for the wireless device you wish to establish a direct wireless link. Please adjust the position of network card (you may have to move your computer if you’re using a notebook computer) and click

‘Rescan’

button for few more times. If you can find the wireless access point or wireless device you want to connect by doing this, try to move closer to the place where the wireless access point or wireless device is located.

Nothing happens when I click

‘Open Config Utility’ 1.

into your computer’s USB port.

2.

Please make sure the wireless network card is inserted Reboot the computer and try again.

3.

Remove the card and insert it into another USB port.

4.

Remove the driver and re-install.

5.

Contact the dealer of purchase for help.

I can not establish connection with a certain wireless access point

1.

Click for few more times.

2.

3.

4.

If the SSID of access point you wish to connect is hidden (nothing displayed in ‘SSID’ field in correct SSID.

key.

Please go to

‘Status’ ‘Site Survey’

function), you have to input correct SSID of the access point you wish to connect. Please contact the owner of access point to ask for You have to input correct passphrase / security key to connect an access point with encryption. Please contact the owner of access point to ask for correct passphrase / security The access point you wish to connect only allows network cards with specific MAC address to establish connection. menu and write the value of

‘MAC Address’

down, then present this value to the owner of access point so he / she can add the MAC address of your network card to his / her access point’s list.

The network is slow / having problem when transferring large files

1.

Move closer to the place where access point is located.

2.

There could be too much people using the same radio channel. Ask the owner of the access point to change the channel number.

Please try one or more solutions listed above.

35

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement