Akura ACLTDVD1921W 21" LCD TV/DVD Combi Instruction Manual

Akura ACLTDVD1921W 21" LCD TV/DVD Combi Instruction Manual
19” LCD TV / DVD Combi
Instruction Manual
ACLTDVD1921W
Customer Help Line: 01422 263313
Opening Hours: Mon-Fri 8am-8pm, Sat 9am-4pm, Sun 11am-4pm
Or visit our website at www.ekey.co.uk
Dear Customer.
Thank you for purchasing this 19” LCD DVD/DVBt combi television.
When unpacking please ensure you have the following items :TV set. Remote Control. 2 x “AAA” battery cells. Mains Adaptor. Mains
input connecting lead. AV lead. Stereo Audio lead. User Instruction
Manual. Quick Start Guide.
LCD TV OPERATION
1- Important Safety Precaution
Before connecting the Tv, please read this book carefully, noting
Warnings and Safety information. Please keep this book safe for future
use.
INDEX
LCD TV Operation.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Important Safety Instructions………………………………….2
Main Functions………………………………………………….4
Installing Remote control batteries……………………………4
Product Overview……………………………………………….5
Remote Control………………………………………………….7
Input Connections……………………………………………….8
Operating Instructions…………………………………………10
Teletext………………………………………………………….11
Menu Operations……………………………………………….13
DVD operation………………………………………………….16
User Help Guide………………………………………………..26
Disc care………………………………………………………..27
Mains plug wiring information…………………………………27
Product Specification…………………………………………..28
Wall Mounting…………………………………………………..28
-1 -
-2 -
1.User Safety Information
On/Off button. This button does not disconnect the Tv from the Mains Supply. To
disconnect from the Mains supply, unplug the mains adaptor at the wall socket.
2- Main functions
1. Receives Analog Tv signals.
2.
Displays Teletext.
3. Plays DVD,CD, VCD discs
Mains Adaptor. Do not use alternative mains adaptors. If using in a Mobile home
or Caravan, you may use a DC lead designed for such use. (Not supplied).
Do not trap or place objects on the mains wire.
4. Displays CVBS, S-Video, VGA (analog) Scart, Audio L/R inputs.
5. Output. Audio (RF) PCM (coaxial)
6. Stereo loudspeakers. 2 x 3W nominal
Physical Damage. Should the Tv or Mains adaptor case become damaged or
faulty, do NOT attempt a repair, do not remove safety covers, there are NO
serviceable parts inside. Consult the Customer Help Line. Do not hit or drop the
Tv. The LCD screen contains many thousands of pixels which may become
damaged. This is not covered by warranty.
7. Full function Infra red Remote Control.
3- Fitting the Remote Control Batteries
Water / Fire. Do not use the Tv in wet or damp areas, such as steamy kitchens,
bathrooms or near swimming pools. Should either the Tv or mains adaptor become
wet, or water enter the ventilation slots, disconnect from the mains supply and call
the “Help Line”. Do not disconnect from the mains supply with wet hands, this may
cause a fatal electric shock.
Do not place the Tv near naked flames, heaters or open fires.
Leaving the Tv. During thunderstorms, or when leaving the Tv for long periods,
such as holidays, unplug the Tv from the mains supply and the aerial lead (if using
an outdoor or communal aerial).
Placing The tv. Place on a firm stable surface such as a table. Do not face direct
sunlight. Do not block or cover ventilation slots, this may cause the Tv to overheat
and possibly cause a fire.
Cleaning. To clean the Tv use a soft damp cloth. For stubborn sticky stains use a
mild detergent solution. Do not use abrasive or petrol based cleaners, you will
irreversibly damage the LCD screen.
Battery Safety and Disposal.
Do NOT break open or throw on a fire. Contact your local waste authority for correct disposal.
Do not mix battery types, such as Re chargable and Alkaline
Always replace as a pair.
Do NOT attempt to recharge Alkaline batteries, they will explode and cause injury.
-3 -
-4 -
Indicator Light Status
4- Product Overview
When the unit is on, the indicator light turns green. The indicator light is red when the
TV is in standby mode.
(2) Illustration of Connector
12
1
2
3
VOL
4
VOL
5
6
CH
CH
COAXIAL
DC
SCART
PC AUDIO
VGA
R AUDIO L
VIDEO
S - VIDEO
Connector Description.
7
13
9
8
RF. TV aerial input connector. 75 Ohms unbalanced Tv aerial or RF interface input
S-VIDEO input. Connect a S-Video source such as DVD player.
VIDEO input. Connect a CVBS video input source such as TV games.
AUDIO L/R input. Connect audio from CVBS or S-Video sources.
VGA Input. Connect your PC (VGA) to use as a PC Monitor.
PC AUDIO input. Connect your PC Audio output when using VGA.
SCART. Multi connection Input and Output point. Standard connection to VCR/DVD and
Tv games.
DC input. DC Supply input from Mains Adaptor 12V 3.2A or 12 V DC supply from
Mobile home or Caravan supply.
ITEM
BUTTON NAME
1
TV/AV
2
FUNCTION DESCRIPTION
COAXIAL Output. PCM Audio output to Hi Fi equipment.
Select the input signals :DVD / TV / SCART / AV / S-VIDEO / PC
MENU
Enter into MENU / ENTER
3
VOL-
Volume down
4
VOL+
Volume up
5
CH-
TV channel down
6
CH+
TV channel up
7
POWER
Switches the TV to standby and on again
8
REMOTE SENSOR
9
Show red in standby mode, show green when your TV is
POWER INDICATOR
switched ON.
Infrared sensor for the remote control.
10
11
RF
/
12
13
... ...
-5-
-6-
... ...
...
6- Connection between different input signals
5- Remote Control Overview
Remote control Illustration
Keys description on the remote control
A) Connect with PC signal
You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not
supplied).
POWER
POWER
MUTE
AUTO
Switch on LCD TV when at standby mode
MUTE
Press to mute the sound. Press again or press VOL+ to unmute.
P.MODE A.MODE DISPLAY NICAM
AUDIO
P.MODE
1. VGA input (Remember to tighten the screws.)
2. PC Audio Input
Press repeatedly to cycle through the available video picture modes:
STANDARD
FRESH
PERSONAL
A.MODE
MILD
Press to cycle through the different sound settings:
PERSONAL
VOICE
MUSIC
THEATRE
NICAM/AUDIO
PC AUDIO
VGA
Press to select the NICAM modes. /Change audio mode:left-right-mono-stereo.
NUMBER BUTTONS
LCD
MENU
DVD
MENU
DVD
STEUP
INPUT
Press 0-9 to select a TV channel directly when you are watching TV. The channel changes
after 2 seconds. To enter page number in teletext mode and select the chapter in DVD.
-/-Press this button to enter a program number for multiple program channel such as 2-1,etc.
Connection steps˖
Returns to the previously viewed programme.
z
THUMBSTICK(
ENTER
/
/
/
/ ENTER )
Allows you to navigate the on-screen menus and adjust the system settings to your
preference.
Make sure that the power of the LCD-TV and the PC are off;
z
Connect a D type 15-pin VGA interface cable (not supplied) to the VGA video interface connector
LCD MENU
on the PC. Then connect the other end to the VGA video interface connector on the back of the
Brings up the LCD main menu to the screen in analogue TV mode.
LCD-TV. Tighten the screws on the VGA connectors once they are firmly connected;
DVD MENU
CH-
VOL+
CH+
TEXT
HOLD
VOLINDEX
SIZE
9 : 7 8
MIX SUBPAGE REVEAL
;4
ANGLE
ZOOM
REPEAT
A-B
Read the user guide supplied with your computer and ensure that it has a VGA connector;
z
Brings up the DVD main menu to the screen in DVD mode.
z
INPUT
z
Press the TV/AV button to set the video input mode of the LCD-TV to “PC”;
Press to cycle through the input source in following:
AV
SCART
TV
DVD
z
Our LCD-TV can support the resolutions list in table 2. If the resolution you want is not listed, the
PC-RGB
Turn on the power of the LCD-TV first, and then turn on the power of the PC;
LCD-TV may not display the image properly,
S-VIDEO
DISPLAY
z
Press to display the source and channel’s information.
z press the AUTO button to automatically adjust the picture.
/
CH+/-
Use the VOL- / VOL+ on the control panel or remote controller to adjust the volume.
Press to scan through or to select a channel.
PROG
INTRO
Table 2
VOL+/-
Resolution
Press to increase / decrease the sound level.
GOTO
SUB-T
SLOW
STEP
TITLE
TEXT/BACKWARD
Switch On or Off the teletext mode. /DVD playing backward fast.
Horizontal frequency
INDEX/
INDEX
SLEEP
EXIT
ΰKHzα
Request the index page. /DVD skip backward button.
Vertical frequencyΰHzα
SIZE/
SIZE
Change display size in teletext mode. /DVD skip forward button.
640x480
800x600
1024x768
720x400
20-55
20-55
20-70
31.47
60-85
60-85
60-75
70
32.5-60
32.5-60
25-80
28.322
SUBPAGE/ANGLE
Clock
ΰMHzα
Sub coded page access.. /DVD angle switch button
REVEAL/ZOOM
Reveal or hidden the hidden words. /DVD zoom button
PROGRAM
To select the DVD program playback.
REPEAT
Repeat playback .
AB
Press to AB playback.
PLAY/PAUSE
Press to play or pause the DVD playing.
STOP/MIX
Press to stop the DVD playing.
Switch to the teletext with mix mode.
SLOW/STEP
Press to slow / step the speed of DVD playing.
AUTO/OPEN
Press to do auto configuration directly /Open the DVD door.
SLEEP
B) Connect to external AV devices using Composite and S-VIDEO inputs
Lets you select amount of time before your TV turn itself off
HOLD/FORWARD
Hold On or Off for current page display/Playing forward fast.
DVD SETUP
To display the setup menu of DVD on the screen.
TITLE
To switch the dialogue at the bottom of the screen.
1.
2.
3.
4.
DC input.
Left & Right Audio input.
VIDEO input
S-VIDEO input
DC
EXIT
Exit menu mode.
INTRO
INTRO menu mode.
SUB-T
GOTO
Select the caption in DVD mode.
Time/chapter play back button.
-7-
-8-
R AUDIO L
VIDEO
S-VIDEO
Connection steps˖
7- Basic operating instructions
z
Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video
connectors;
z
Make sure that the power of the LCD-TV and the AV device are off;
Turn on the LCD-TV
z
Connect a Composite video cable (supplied) to the yellow composite video connector input on the
When the Power button is pressed and the LCD-TV is turned on, the indicator
light on the front of the LCD-TV changes from red to green. When the LCD-TV
is turned on, the input mode is displayed on the screen. When the LCD-TV is
turned off using the Power button, the LCD-TV will go into standby mode and
the indicator light turns red.
back of the LCD-TV. Now insert the other end of the composite cable into the yellow composite
connector output on the AV device.
z
Alternatively connect a S-Video Cable (not supplied, provide better image quality) to the S-Video
connector on the back of the LCD-TV. Now insert the other end of the S-Video cable into the
S-Video connector on the AV device;
z
Note:Whe display of the input mode will disappear in 3 seconds.
Connect the RCA audio cables (supplied, white and red connectors) from the AV devices’ RCA
audio output connectors to the RCA audio input connectors on the back of the LCD-TV;
z
Turn on the power of the LCD-TV first, and then turn on the power of the AV device;
z
Press the TV/AV button to set the video input mode of the LCD-TV to “S-VIDEO” mode or “AV”
Switch Among Different Inputs: TV/ DVD/ SCART/ AV/ S-VIDEO/ PC-RGB
mode;
TV
DVD
SCART
Press the TV/AV button to select the input mode you want.
Each time you press the TV/AV button,
C) Connect with TV signal
AV
S - VIDEO
PC-RGB
TV/ DVD/ SCART/ AV/ S-VIDEO/ PC-RGB
1.
will appear on the screen in the order.
Antenna / 75 Ÿ aerial input.
Note:
The display of the input mode will disappear in 3 seconds.
Connection steps˖
z
Make sure that the power of the LCD-TV is off;
z
Connect an antenna cable (CATV) to the corresponding interface connector (75 Ө ANT) on the
Audio control
back of the LCD-TV. Connect the other end of the antenna cable to the antenna connector on the
wall or on your digital cable / satellite receiver. Now you are able to view regular cable TV;
z
z
Turn on the power of the LCD-TV;
Press the TV/AV button to set the video input mode of the LCD-TV to “TV” mode. The channel
1. Press the VOL+ button to increase the volume. A number will appear
on screen indicating the volume level.
2. Press the VOL- button to decrease the volume. A number will appear
on screen indicating the volume level.
number appears in the top left side of the screen;
z
You can use key CH + / CH - button or the number keys on the remote control to select the
Mute
channel you want to watch;
1. Press the MUTE button to mute the sound temporarily. A Mute icon
appears on the screen.
2. Press the MUTE button again to restore the sound. The Mute icon
disappears.
D) Connect with SCART signal
SCART inpu t
SCART
Note˖
When you turn the LCD-TV off, the mute function is canceled automatically.
Connection steps˖
z
z
Read the user guide supplied with your AV devices and ensure that it has a scart connector;
Make sure that the power of the LCD-TV is off;
z
Connect a SCART cable to the corresponding interface connector on the back of the LCD-TV;
z
Turn on the power of the LCD-TV;
z
Press the TV/AV button to set the video input mode of the LCD-TV to “SCART” mode;
-9-
- 10 -
Press Reveal to reveal hidden words e.g. quiz page answers. Press again to hide.
Select the TV channel you want
Red/Green/Yellow/Blue Buttons
Fast Text operation. Press the required colour button to jump to the section required quickly.
You can use the number keys on the remote control to directly select TV channels.
The LCD-TV can store up to 99 channels (1 to 99 ), and you can press the keys on the remote control
or on the panel to make a selection.
HOLD Button
Press HOLD to retain the Teletext page when viewing multi-page information
Press again to return to automatic page update.
1- Press the relevant key on the remote control if you want to
choose any channel from 1 to 9.˄for example: if you want to
choose channel 8, just press the key number 8.˅
INDEX Button
Press INDEX to return to the main index page.
Depending on the way information is transmitted, this may have to be pressed more than once to return to the
main index page.
2- If you want to choose a channel bigger than 9, please press the
“-/--” button until “- -” is indicated on the screen. Enter the two
digits of the channel number you want to watch.˄for example:
select channel 16˅
SUBPAGE Button
When Teletext information exceeds more than one page, it may take some time for the automatic changing of the
sub pages to reach the sub page you require.
It is possible to enter your required sub page and continue watching the normal programme until the correct sub
page is found.
Select the required page number using buttons 0-9.
If the top of the page indicates that sub pages are being transmitted yet the page does not change, then the
number at the top of the page is there indicate that the broadcaster has updated the page’s contents, there are
no sub pages.
Press SUBPAGE, page number/---- will be displayed at the Bottom right of the screen.
Enter desired sub page number before the page number/---- disappears. To select page 6 enter 0,0,0 and 6.
3- If you want to choose a channel bigger than 99, please press the
“-/--” button until “- - -” is indicated on the screen. Enter the three
digits of the channel number you want to watch.˄for example:
select channel 116˅
NICAM
Usually set to stereo to provide the best reproduction, but if reception deteriorates or if the service
is not available then switch to Mono.
Mono(M1) and (M2) can also be selected if a mono signal is being transmitted.
Text Button
Press TXT one time to enter Teletext mode and only the text page can be visible.
Press TXT two times to enter Teletext mode and both the TV picture and text page can be visible.
Press TXT three times to leave Teletext mode
NICAM Button
Press NICAM to switch sound mode.
9- Menu operations
8- TELETEXT
You can modify certain parameters of the LCD-TV in the menu system. Please read the following
descriptions to get an understanding of each adjustable parameter.
Page numbers can be entered directly using the numeric buttons.
Size button. Press SIZE to change the display magnification. : Normal
=> Enlarged upper screen => Enlarged lower screen => Normal.
HOLD
;4
INDEX
SIZE
MIX SUBPAGE REVEAL
/
CH=/CH- Selection
CH+/CH- will advance or reverse the page number by one, with each
press of the button.
Input mode PC
TEXT
9 : 7 8
Teletext features may vary depending on the Broadcasting Companies and is only
available if the channel selected is transmitting Teletext. Pressing the Picture
button whilst in Teletext operation will switch the current status to TV. When in
Teletext mode, the volume may still be altered to the desired listening level.
ANGLE
ZOOM
PROG
INTRO
REPEAT
A-B
GOTO
SUB-T
SLOW
STEP
TITLE
SLEEP
1-
Press MENU button to either display the “PC” or “GENERAL” or “AUDIO” menu.
2-
Press CH+ / CH- buttons to scroll through the parameters
3-
Press VOL- / VOL+ buttons to make changes to the parameters
4-
Press the EXIT button to exit the menu .
EXIT
Reveal button
- 11 -
- 12 -
Name of menu
Picture of menu
Instructions
1. Brightness : Adjusts the brightness of
the picture, the image becomes brighter
as the number increases.
2. Contrast : Adjusts the contrast of the
picture, the image increases in contrast
as the number increases.
3. Colour setting : Select between
9300k / 6500k and user define.
4. Auto Config: Auto adjusts the H / V
position, Clock and Phase automatically.
Use this in most cases.
5. H-Position : Adjusts horizontal
position.
6. V-Position : Adjusts vertical position.
7. Phase : Removes any horizontal
distortion and sharpens the displayed
characters.
8. Clock : Adjusts the TFT/LCD to match
the input source.
PC MENU
Name of menu
Picture of menu
Instructions
Picture Menu
1. Brightness : Adjusts the brightness
of the picture, the image becomes
brighter as the number increases.
2. Contrast : Adjusts the contrast of the
picture, the image increases in contrast
as the number increases.
3. Colour. Adjusts the colour saturation.
4. Sharpness :Adjusts the level of detail
enhancement. ( Not available in DVD
mode).
VIDEO MENU
GENERAL MENU
Audio Menu.
1. Volume : Adjusts the volume level.
2. Balance : Adjusts the balance between
Left and Right audio channels.
3. Audio Preset : Four different settings.
Personal , Voice, Music, Theatre.
4. Treble : Adjusts the audio treble level.
5. Bass : Adjusts the audio bass level.
Note items 4 and 5 can only be set in
“Personal mode”.
AUDIO MENU
GENERAL MENU
Z OOM
FULL
General Menu
1. Language : Selects the OSD
language. Chose between English,
French, German, Spanish, Italian and
Portuguese.
2. Blue Screen : Displays a blue screen
in “No Signal” conditions.
3. Noise Reduction : Reduces the noise
of the picture in certain conditions.
4. Input Source. Displays the current
input source, and selects the alternative
inputs with each press of the > button.
5. O
Z OM : 16:9 and 4:3 State Transition
6. Reset : Resets the Tv to “factory
default”.
Input mode AV /S-Video / SCART / DVD:
1-
Press MENU button to either display the “VIDEO” or “GENERAL” or “AUDIO” menu.
2-
Press CH+ / CH- buttons to scroll through the parameters.
3-
Press VOL- /VOL+ buttons to make changes to the parameters.
4-
Press the MENU button to exit the menu.
- 13 -
ZOOM
FULL
General Menu
1.Language: Selects the OSD language.
Chose between English, French, German
, Spanish, Italian and Portuguese.
2. Blue Screen : Displays a blue screen
in “No Signal” conditions.
3. Noise Reduction : Reduces the noise
of the picture in certain conditions.
4. Input Source. Displays the current
input source, and selects the alternative
inputs with each press of the > button.
5. O
Z OM : 16:9 and 4:3 State Transition
6. Reset : Resets the Tv to “factory
default”.
Audio Menu.
1. Volume : Adjusts the volume level.
2. Balance : Adjusts the balance
between Left and Right audio channels.
3. Audio Preset : Four different settings.
Personal , Voice, Music, Theatre.
4. Treble : Adjusts the audio treble level.
5. Bass : Adjusts the audio bass level.
Note items 4 and 5 can only be set in
“Personal mode”.
AUDIO MENU
Input mode: TV
1-
Press MENU button to either display the “VIDEO” or “TV” or “GENERAL” or “AUDIO” menu.
2-
Press KEY CH+ / CH- to scroll through the parameters.
3-
Press VOL-/ VOL+ buttons to make changes to the parameters.
4-
Press the EXIT button to exit the menu.
- 14 -
Name of menu
Picture of menu
Instructions
VIDEO MENU
TV MENU
CHANNEL
CHANNEL NAME
6
********
TV MENU
- 15 -
Picture Menu
1. Brightness : Adjusts the brightness of
the picture, the image becomes brighter
as the number increases.
2. Contrast : Adjusts the contrast of the
picture, the image increases in contrast
as the number increases.
3. Colour. Adjusts the colour saturation.
4. Sharpness :Adjusts the level of detail
enhancement. ( Not available in DVD
mode).
Tuning Menu.
1. Channel : Displays the current channel and
select using the ◄/► buttons.
2. Channel name:Show that the current channel.
3. System : This sets the “Sound standard” of
the country you are in. The TV is “defaulted” to
“I”. Other systems available are :- B/G “western
Europe”, D/K “eastern Europe”. To change use
the ◄/► buttons.
4. Skip : Select the channel you want to skip as
in (1). Select “Skip” and then turn “on or off”
using the ◄/► buttons. When “on” a channel is
skipped, using the CH+/CH- buttons, however
the station can still be selected using the
numeric buttons.
5. AFC : “Auto frequency control”. Leave turned
“ON” It will “auto turn off” when tuning.
6. Fine Tune : In unusual circumstances the
sound or picture may be improved. Turn the
AFC “off” to adjust Fine tune.
7.SWAP : When “Auto Searching” the stations
should be placed into the correct locations
automatically, eg :- BBC1, BBC2, ITV,CH4,
CH5. In certain circumstances this may not
happen. To “swap” locations, select SWAP then
press ►. Select “From” and use the ◄/►
buttons to select the number you wish to move
from. Select “To” with the ▼/▲, and use the
◄/► buttons to select the number you wish to
move to. Select “SWAP” and press ►. The
station will now move to the new location. The
station in the “To” location, will now move to the
“From” location (swap). If all the stations need
re locating, start with the “lowest To” number,
locate BBC1 in the “From” section. Select “To”
and adjust to “1”, with the ▼/▲ buttons. Select
“Swap” and press ►. Press ► again to return to
the Swap menu. Continue until all stations are
in the correct order.
8. Manual Search : In certain circumstances
a station may be missed in “Auto Search”, or
another station may need to be added.
Select “Channel” and “input” the location
number required. Select “Manual Search” and
press ►. You will be asked to chose “Up” or
“Down”. Use the ◄/► to select and press
“Enter”. The Tv will now start to search. When
the Tv finds a station it will stop, if this is the
correct one, let the menu “time out” and the
station will be stored. If it not the correct
station press the Up/Down selection again
and continue until the correct station is found.
9. Auto Search : Select “Auto Search” and
press ►. The Tv will now search the entire
bands. When complete the Tv will display the
station stored in location 1. Sometimes the Tv
will store a poor station, in location 1, this is
when the “Manual Search” will be needed.
GENERAL MENU
ZOOM
FULL
General Menu
1.Language: Selects the OSD language.
Chose between English, French, German
, Spanish, Italian and Portuguese.
2. Blue Screen : Displays a blue screen
in “No Signal” conditions.
3. Noise Reduction : Reduces the noise
of the picture in certain conditions.
4. Input Source. Displays the current
input source, and selects the alternative
inputs with each press of the > button.
5. O
Z OM : 16:9 and 4:3 State Transition
6. Reset : Resets the Tv to “factory
default”.
Audio Menu.
1. Volume : Adjusts the volume level.
2. Balance : Adjusts the balance
between Left and Right audio channels.
3. Audio Preset : Four different settings.
Personal , Voice, Music, Theatre.
4. Treble : Adjusts the audio treble level.
5. Bass : Adjusts the audio bass level.
Note items 4 and 5 can only be set in
“Personal mode”.
AUDIO MENU
10- DVD Operation
Basic operation
1. Turn ON and OFF the DVD function
- Turn on the LCD TV and then press INPUT repeatedly to select DVD mode.
2. Inserting DVD disc
Insert the DVD/CD disc into the slot with the Label facing “AWAY” from you “shiny side forward”. The player will load the disc
automatically. There will be an on screen notice indicating “CLOSE” and then “READ”. After loading the disc content, the
player will start playing automatically. If there is already a disc inside the player, do NOT attempt to put another disc inside.
Note :- With some discs, after loading the contents of the disc, you may need to press “Play” or select from the Disc menu.
IMPORTANT :- Ensure the disc is loaded correctly, with the shiny side facing forward. If playing a dual side disc, ensure the
title you want to play is facing away from you..
3. Play the DVD
- According to the disc content, the disc menu will display for your selection. When playing the disc, you may use
button
to toggle between Play and Pause mode. This product also supports Menu, Title, Sequential and Program playback.
4. Menu playback (for DVD discs)
- Press DVDMENU button
For DVD discs, the screen will display the DVD Disc Menu (Root Menu)
- For DVD discs, use the navigation buttons to select and Play the highlighted contents;
- Press ENTER or
button to start from the highlighted content.
- Return to the Root Menu when playing the disc
For DVD discs, press DVDMENU to display the Disc Menu.
- STOP
- 16 -
Press
button once to stop. Press
button to resume from where you stopped.
Press button Twice to stop. Press
button to start from beginning.
In order to protect the disc, press button then press EJECT button to take the disc out. When the disc is ejected, hold
the disc edge slightly and take it from the eject direction to prevent scratches.
When not using the DVD function (in stand-by mode or using others modes for a long time), please take out the disc to
protect the DVD loader and the disc.
5. Title playback (for DVD disc only)
- Press TITLE button, there will have an on screen indication “TITLE”.
- Press the direction or numeric buttons to select your favorite title.
- Then will play from the first chapter of the selected title.
C
5
:
9
:
1
[
]
5
[
]
9
[
]
12
[
]
2. Previous/Next (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
2
]
]
6
]
]
10
11
[
[
]
]
14
7
[
[
15
[
[
]
]
- While playing the disc;
Press
button to play to the last Title / Chapter / track.
Press
button to play to the next Title / Chapter / track
]
8
[
]
13
[
]
16
[
]
:
6
:
10
:
3
:
7
:
11
:
3
[
[
:
4
[
:
8
:
12
PLAY
CLEAR
PLAY
- According to the highlight area input the title and chapter number by numeric buttons, press
to the <PLAY> by navigation buttons, press ENTER button to start.
CLEAR
button to start; or move
- For DVD discs, the above functions may vary due to different DVD disc's structure.
3. Forward/ Backward (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- There are 4 speeds for forward. Press
button to toggle between different speeds in sequent. (FORWARDx2 /
FOR WARDx4 / FORWARDx8 / FORWARDx20 / Play).
While in backward, you may press
to resume normal speed.
For CD, HD-CD, Digital Audio, backward also has audio output.
For DVD discs, if backward to first title / chapter, it will start from the beginning.
NOTE: For DVD discs, During Forward or Backward, the sound will be off.
- While playing the disc, you may use slow motion function.
This products can play the following format of disc.
Recorded Time
Single side:120mins. Approx
DVD
button will stop the playback.
button will stop the playback.
4. Slow motion(for DVD discs)
Supporting DVD format
Disc Size (Diameter)
If the current track is the first one, press
If the current track is the last one, press
- While playing the disc, you may use forward or backward function.
- While playing the program, you may press PROGRAM button to display the program menu for edit. To clear the program
by moving to <CLEAR> and press ENTER button. Or press
button to end the program. When press
button again,
the disc will play by sequent.
- While playing the program, there will have an on screen indication “PRG PLAY” and the current title and chapter number.
Disc Type
2
4
NOTE: From track 1-10, use numeric buttons directly; For tracks over 10, press - / -- button first. (E.g. Track 15, press - / -then 5)
PROGRAM
2
4
1
3
- For CD, CD-G & HD-CD discs, while playing the disc, you may play your favorite tracks by numeric buttons.
- For Digital Audio / JPEG disc, you may play your favorite tracks by numeric buttons from the content menu.
- If input track number is not valid, it will not function.
CD /CD-G/ D-CD discs
T
2
1. Play (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- Using Program playback, you can select max. 16 tracks from the disc to playback in programmed order.
- OSD for program playback as below.
C
1
- For DVD disc, press
button from root or title menu; while playing the DVD, you may play your favorite title directly with
title selection by pressing the TITLE button.
7. Program playback (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
T
4
DVD Functions operating instructions
- For DVD discs, press button will enter the disc menu.
For others, while it stopped, press
button to start in sequent.
PROGRAM
T C
1
:
As it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes
and discs can have an optional region code. If you load a disc of a different region code into your player you will see the
region code notice on the screen. The disc will not playback and should be unloaded. The region code for this player is 2
(refer to the symbols below).
ALL
6. Sequential playback (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
DVD/ Digital Audio/JPEG discs
NOTE: Also support DVD-RW, DVD+RW, DVD+R, CD-R, CD-RW playback.
Region Code 2
Recorded Content
Double side:240mins. Approx
DVD format:
Compressed digital
audio and video
12cm
Remarks
There are 6 speeds for slow motion. Press
button to toggle between different speeds in sequent. (SF1/2, SF1/3,
SF1/4, SF1/5, SF1/6, SF1/7, Play).
While in slow motion, you may press
to resume normal speed.
NOTE: During Slow motion, the sound will be off.
5. Pause (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- FOR CD, CD-G, HD-CD & Digital Audio/JPEG discs, press
button to pause; press
button to resume.
- FOR DVD, press
button to pause; press
button to playback frame by frame; press button to resume.
6. Repeat (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
DVD-R
12cm
120mins. Approx
Compressed digital
audio and video
CD
12cm
74mins. Approx
CD-DA: Digital audio
HD-CD
12cm
74mins. Approx
HD-DA: Digital audio
Digital Audio
/JPEG
12cm
600mins. Approx
Digital audio
- 17 -
- Press REPEAT button once to display the current repeat mode.
For CD, CD-G, HD-CD, discs, while playing in sequent, you may use the repeat playback.
There are 2 repeat modes, press REPEAT to toggle between different modes in sequent. (REP: OFF, /REP:1,
/REP: ALL).
For Digital Audio / JPEG discs, press REPEAT to toggle between different modes in sequent. (REP:
OFF/ REP: 1/ REP: DIR /REP: ALL).
For DVD discs, you may setup the repeat playback mode. There are 3 repeat modes, press REPEAT to toggle between
different modes in sequent. (REP: OFF / REP: CHAPTER / REP: TITLE / REP: ALL).
7. Display (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- Press Display button to activate the on screen roll-down menu for the current Title, Chapter, time and other information
- 18 -
For DVD discs, (2 pages) Press Display button once to display first page as shown below:
Disc Type
DVD
Chapter
TT 1/ 6
-/-(Current/Full)
CH
1 /1
Elapsed disc time
2
00:03:37
12. Subtitle (for DVD discs)
- Press SUBTITLE button once to display current sub-title.
- Press again to toggle between different subtitle modes in sequent.
NOTE: For Multi-languages subtitle DVD discs, press SUBTITLE button to select your favorite subtitle
language.
13. Angle (for DVD disc)
Tiltle
-/- (Current/ Full)
- Press ANGLE button once to display current playback angle.
- Press again to toggle between different playback angle codes in sequent. (E.g. Angle -/- (Current/Full) or OFF)
Press Display button again to display second pages shown below:
Audio
Language
1 / 1
-/- (Current/ Full) or OFF
Audio Type
NOTE: Only for DVD with multi-angle, press ANGLE button to select your favorite playback angle. Selectable playback
angle depends on the availability of the DVD contents.
Angle ON/OFF
2CH
OFF
OFF
14. Mute (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- Press MUTE button to mute the audio output. There will have an on screen symbol indicate “MUTE”.
- Press again to cancel, or Press VOL + to cancel and adjust the volume.
- In case there is no audio output, try to press MUTE button to cancel mute.
Subtitle -/-(Current/Full)or OFF
Press Display button again to turn off the on screen display.
For CD, CD-G, HD-CD, Digital Audio /JPEG discs, Press Display button once to display first page: Disc type,Track -/(Current / Full), Mute status, Repeat mode status, Current track time.
- Press Display button again to turn off the on screen display.
8. Goto (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- This function allows you to play your favorite Title / Chapter / track. Press GOTO button to activate the on screen scrolldown menu for edit. According to the highlighted area, input your favorite Title / chapter / Track number by numeric buttons
or input the playback time. After editing, press ENTER to start. If the input is invalid, it will not function.
9. PREVIEW (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- For DVD discs, while the disc had stopped, press PREVIEW button.
The screen will split to 9 small displays to play each track by 3 sec. according to the tracks order.
Press
/
button to navigate the 9 small screens.
Press
button to playback the current selection.
Press 1 - 9 button to activate corresponding small screen directly.
- For CD, CD-G, DTC-CD, HD-CD discs, while the disc had stopped, press PREVIEW button. It will start to play each track
by 15 sec. according to the tracks order.
Press numeric buttons directly to select the tracks for preview
Press
button to playback the current track
While playing the discs, you may also press PREVIEW button to activate this function.
NOTE: - If started the disc menu, preview will not function.
- if the current track started over 15 sec. this function will start from next track.
15. ZOOM (for DVD/ Digital Audio and JPEG discs )
- Press ZOOM button to zoom in the picture.
- There are 6 zoom modes, press ZOOM button to toggle between different zoom modes in sequent. (Zoom2 - Zoom3 Zoom4 - Zoom1/2 - Zoom1/3 - Zoom1/4 - Zoom OFF)
- In Zoom2-4, you may use the navigation buttons to pan the picture for your favorite portion.
16. Repeat A- B (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- In normal Playback, fast forward or fast reverse, press A-B button at where you want to start the repeat portion. There will
have an on screen indication “REPEAT A “.
- In normal Playback, fast forward or fast reverse, press A-B button again at where you want to stop the repeat portion.
There will have an on screen indication “REPEAT A B“.
- The repeat function started to playback the portion from A to B automatically.
- Press A-B button again to cancel. There will have an on screen indication “A B CANCEL”.
For CD/HD-CD/Digital Audio discs, repeat A-B is only function within the same track. When playing the others, repeat
A-B will cancel automatically.
For DVD discs, repeat A-B is only function within the same Title /Chapter. When playing the others, repeat
A-B will cancel automatically.
17. Volume (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
- Press - VOL / VOL + buttons to adjust the output volume.
NOTE: Playback DVD discs in original code, is not adjustable
Digital Audio/JPEG Playback
After loading the Digital Audio / JPEG disc, it wil start to scan for the stored Digital Audio /JPEG folders. Then will firstly display
the Digital Audio contents automatically and start to play the first file (highlighted file).
Screen as follow:
10. AUDIO (for DVD/ CD/ CD-G/HD-CD and Digital Audio/ JPEG discs )
Display current
Digital Audio
playback function
- Press AUDIO button once to display current audio mode.
- Press again to toggle between different audio modes in sequent.
For CD, CD-G, HD-CD, Digital Audio discs: (Stereo - L - R)
Note: Switching to Auto L / R audio channel may be varied due to different discs contents. Bilingual DVD
discs can use AUDIO button to switch between different languages.
11. Language (for DVD discs)
- Press AUDIO button once to display current language.
- Press again to toggle between different languages mode in sequent.
For DVD discs: (1 - 2 - 3 - 4)
NOTE: For Multi-languages DVD discs, press AUDIO button to select your favorite language.
- 19 -
Display current
Digital Audio
playback function
Highlight file for
current playback.
Buttons for switching
between Digital Audio
and JPEG playback
function.
- 20 -
Scroll bar to view
next page.
- Using the navigation buttons to check your favorite folder and playback the first file or move to your favorite file.
System Setup
NOTE:
- Press ◄ ► buttons to move the highlight to folders, documents or mode selection.
- Press numeric buttons to select the contents directly. For number over 10, press -/-- button first. (e.g. File number 15,
press -/-- then 5.)
- When playing back Digital Audio files, there is a list of files displayed.
This menu enables you to set the picture format for your DVD
- Playing the JPEG discs, press PROGRAM button to select slide effects. There are 17 slide modes, press PROGRAM
button to toggle between different modes in sequent. (Start from top Start from bottom Start from left Start from right
Start from upper left corner Start from upper right corner Merge from left / right Horizontal blades Vertical blades Merge
form 4 corners Random Playback Slide effect OFF).
- When play or pause with picture playback, you may use navigation buttons to flip / rotate the picture.
TV color system
NTSC
This format is used by some other countries, e.g. USA
PAL
This is the format used in the UK and the default setting.
AUTO
This format can be used if your DVD is capable of both PAL and NTSC formats.
▲ button to flip horizontally.
▼ button to flip vertically.
◄ button to rotate left 90˚.
► button to rotate right 90˚.
SYSTEM SETUP
- When play or pause with picture playback, you may use D.MENU button to enter preview mode to dislay 12 pictures.
Press
/
button to select next / previous page or press numeric buttons to view the corresponding pictures.
- The maximum JPEG image size that can be displayed is 1280 x 1024.
Function Settings
TV SYSTEM
TV TYPE
PASSWORD
RATING
RESUME
DEFAULT
NTSC
PAL
AUTO
DVD Function General setup
NOTE: PAL format is generally used for TVs in the UK.
Check your TV user guide for supported formats.
If NTSC is selected with a non-compatible television
you may experience interference or picture scrolling.
SYSTEM SETUP
TV SYSTEM
TV TYPE
PASSWORD
RATING
RESUME
DEFAULT
TV Type
DVDs are produced in a variety of screen aspect ratios. This menu enables you to select one of the three aspect ratios:
SYSTEM SETUP
- Press DVD SETUP button to activate the DVD player OSD
menu;
- Press ◄ / ► button to move and highlight between
different sub-menu. Press ▲ / ▼ ENTER button to enter
the highlighted sub-menu.
TV SYSTEM
TV TYPE
PASSWORD
RATING
RESUME
DEFAULT
4:3PS
4:3LB
16:9
4:3 PS (Normal)
4:3 LB (Normal)
16:9 (Wide)
- Select the most appropriate aspect ratio for the DVD
being viewed.
- Press DVD SETUP button to exit the OSD menu.
NOTE: In Setup mode, the following functions will be cancel or pause :
TITLE, SUB-TITLE, DISPLAY, PLAY, STOP, SLOW / STEP, AUDIO, FF, FR, PREV, NEXT, GOTO,
ZOOM, ANGLE, PROGRAM, PREVIEW, REPEAT, REPEAT A-B.
4:3PS (Normal)
Normal Pan and Scan is used for most normal television broadcasts.
It has an aspect ration of 4:3. If you select this setting when viewing a DVD,
the picture will fill the screen but, you will not see the left and right edges
of the picture.
- 21 -
- 22 -
4:3LB (Normal)
Default Setting
Normal Letter Box will show the DVD in its original aspect ratio so depending
on the size of your television screen, you may see black borders above and
below the picture.
- Press ENTER button to restore factory default.
Teletext
16:9 (Wide)
SYSTEM SETUP
Choose this setting if you have a widescreen television. it is the default setting.
Teletext operation
operation
NOTE:
- Playback screen size may vary according to the discs contents.
- For discs with 4:3 contents, using any mode would only display a 4:3 screen
- Screen ratio selection should be according to the connected TV / Display
aspect ratio.
TV SYSTEM
TV TYPE
PASSWORD
RATING
RESUME
DEFAULT
RESTORE
PassWord
- The default setting is locked. No Rating selection or change password could be done. To edit the Rating setting, please
enter default password “0000” by numeric buttons, then press ENTER button to confirm.
Language Setup
- To change password, input any 4 digit number when the lock is unlocked. Once the 4 digit number is entered, that will be
your new password.
Press DVD SETUP button to enter the DVD OSD menu.
TV SYSTEM
TV TYPE
PASSWORD
RATING
RESUME
DEFAULT
- OSD Language
Use navigation buttons to select the OSD LANGAUGE setup
icon, press ENTER button to confirm. There are 6 languages
for your selection, press ▲ & ▼ buttons to toggle between
different languages ENGLISH / GERMAN /PORTUGUESE/
FRENCH /ITALAN / SPANISH. Press ENTER button to confirm.
LANGU. SETUP
SYSTEM SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
----
Rating
- Playback for some discs with rating, you can select the rating setting according to your preference. Rating restriction
divided in eight different category from KID SAFE to ADULT.
SYSTEM SETUP
1 KID SAFE
2G
3 PG
4 PG13
5 PG-R
6R
7 NC-17
8 ADULT
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
PORTUGUESE
- Audio Language
Use navigation buttons to select the AUDIO LANG setup icon, press ENTER button to confirm. There are 8 languages for
you selection, press ▲ & ▼ buttons to toggle between different languages. (ENGLISH / FRENCH / SPANISH / PORTUGESE
GERMAN / LATIN / JAPAN / CHINESE ). Press ENTER button to confirm.
LANGU. SETUP
TV SYSTEM
TV TYPE
PASSWORD
RATING
RESUME
DEFAULT
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
NOTE: Only editable when password is unlocked. And only
can function when password is locked. It does not,
however, reset either the Password or the Rating
setting.
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
PORTUGUESE
OFF
NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc
automatically. The default language setting is English.
- 23 -
- 24 -
- Subtitle Language
Use navigation buttons to select the SUBTITLE LANG setup icon, press ENTER button to confirm. There are 7 languages
for you selection, press ▲ & ▼ buttons to toggle between different languages. (ENGLISH / FRENCH / SPANISH /
PORTUGESE/ GERMAN / JAPAN / CHINESE / OFF) Press ENTER button to confirm.
11- User Help Guide
LANGU. SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
PORTUGUESE
OFF
NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc
automatically. The default language setting is English.
MENU Language
LANGU. SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
PORTUGUESE
OFF
- Use navigation buttons to select the MENU LANG setup icon,
press ENTER button to confirm. There are 8 languages for you
selection, press ▲ & ▼ buttons to toggle between different
languages. (ENGLISH / FRENCH/ SPANISH / PORTUGESE
GERMAN / LATIN / JAPAN / CHINESE) Press ENTER button
to confirm.
NOTE: If the selected language is not included in you DVD disc content, it will select the default language of the disc
automatically. The default language setting is English.
Audio Setup
Audio Output
AUDIO SETUP
DOWNMIX
AUDIO OUT
LT/RT
STEREO
VSS
- Use navigation buttons to select the DOWNMIX setupicon,
press ENTER button to confirm.
- There are 3 modes for your selection; use navigation buttons
to select different modes, press ENTER button to confirm.
AUDIO SETUP
DOWNMIX
AUDIO OUT
SPDIF/OFF
SPDIF/RAM
SPDIF/PCM
- Use navigation buttons to select the AUDIO OUT
setupicon, press ENTER button to confirm.
- There are 3 modes for your selection; use navigation buttons
to select different modes, press ENTER button to confirm.
- 25 -
If you are still having difficulty please call the Technical help line. Ring 01422 263313
(Normal rates apply).
Opening hours Mon-Fri 8 am – 8pm. Sat 9 am – 4pm. Sun 11am – 4pm “Bank holidays
as Sun”
Or try our website :- www.ekey.co.uk (24Hr) Emails should be responded to within 3 - 4
hours should the consumer have difficulty getting through.
- 26 -
14- Product specifications
12- Disc Care
Items
Relevant illustrations
LCD
19.0 TFT LCD
Brightness
300cd/m2
Life-span of the screen backlight
50,000 hours
View angle
Horizontal view angle (L / R)˖ 80° / 80°
Vertical view angle (H / L)˖ 80° / 80°
PC input
Horizontal frequency˖20~70kHz
Vertical frequency˖60~85Hz
Resolution
1440 * 900
Features
Compatible areas
EUROPE
TV standard
PAL SECAM BG DK I L/L’
Number of channels 99
PC
Input interface
13- Mains plug wiring
DB15 VGA input interface
AV video ǃS video
Composite video input interfaceǃS video input interface
TV
75ȍ ANT.
SCART
CVBS/RGB signal in,CVBS signal out
Audio
Audio 1 (leftǃright audio input interface)
Audio 2 (leftǃright audio input interface)
Audio Output
3W×2
OSD language
English, French,Spanish,Portugese,German,Italy
Power supply
AC 220V~ (110-240V~/50Hz)
Power consumption
< 60W
Accessories
Operating instructions
Remote control
2AAA size batteries
Adapter
AC power line
15- VVall Mounting
The Tv is provided with mounting holes for a VESA approved wall mounting bracket (NOT
SUPPLIED). Remove the Two Posi screws holding the base to the base bracket and lift the
IMPORTANT
For your safety. If the mains plug needs replacing, proceed as follows :DO NOT CONNECT THE CENTRE PIN (EARTH).
Connect the Blue wire to the (N) term inal ( this may be coloured blue).
Connect the Brown wire to the (L) terminal adjacent to the fuse ( this may be coloured brown).
This appliance must have a 3A fuse fitted.
- 27 -
base away (do not remove the base mounting bracket). Mount the VESA bracket using 4x
4mm x 10mm Iso metric threaded screws (not supplied). Do NOT use screws longer than
12mm, damage will occur to the internal parts. Fit the wall bracket securely following the
manufacturers instructions.
Akura accept no responsibility for damage caused by faulty bracket installation.
- 28 -
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement